Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 31 to 60 of 3924
2016-10-20
Article
One of the biggest issues in bringing forward new designs is the length of time that it takes to agree to a new specification, research and evaluate the alternative features and configurations, and then embark on a development program that will take the design to flight testing and ultimately operational service.
2016-10-19
Article
Pinnacle Industries and VDL Groep, of Eindhoven, Netherlands, partnered in August 2016 to establish VDL Pinnacle Engineering India in Pune, India. The joint venture will provide specialized engineering services for the production automation industry worldwide, focusing primarily on body-in-white (BIW) weld shops.
2016-10-19
Article
Global technology and services supplier the Bosch Group is strengthening its presence in the Indian growth market. In 2016, Bosch plans to invest more than 100 million euros in its Indian manufacturing and development locations, according to Peter Tyroller, the member of the Bosch board of management responsible for the Asia Pacific region.
2016-10-18
Article
Researchers from the U.S. Naval Research Laboratory's Optical Sciences Division and Material Science Division have detected acoustic emissions from cracks in riveted lap joints using a distributed feedback fiber laser-acoustic emission sensor.
2016-10-13
Article
Nexteer Automotive opened a new manufacturing plant in Pune, India in late September, which makes it the steering and driveline business’s third manufacturing plant in India.
2016-10-10
Article
Aras Manufacturing Process Planning (MPP) is a new product lifecycle management (PLM) platform-based application from Aras for managing the complex business processes that extend from product development through manufacturing.
2016-09-27
Article
The SAE AMS3144-qualified Aerocron primer is chrome-free and water-based, and it reduces emissions as well as waste-treatment requirement, according to PPG.
2016-09-17
Article
Composite machine manufacturer Mikrosam delivered a fully automated filament winding line for CNG tanks to automotive supplier Magna’s Austria plant.
2016-09-16
Article
A new piston and pin concept and a high-temperature-resistant, low-friction coating result in reduced friction and lower fuel consumption for commercial vehicle engines.
2016-09-14
Article
Construction has started on a new Jaguar Land Rover manufacturing facility in Nitra, Slovakia.
2016-09-06
Article
With FASTSUITE Edition 2, CENIT provides an efficient Digital Factory solution for smart manufacturing.
2016-09-02
Article
As a new option, YXLON provides ASTM E2973 digital reference images for aluminum and magnesium die castings in its imaging software Image2500 and Image3500 of X-ray inspection systems, including Y.MU2000-D and MU60 AE.
2016-08-31
Article
In addition to Heimatec's standard tooling line, the company offers custom-designed and special tooling service.
2016-08-02
Article
3D printing a car is impressive enough; building an excavator, layer by layer, is downright unimaginable. Researchers at Oak Ridge National Laboratory have not only imagined it, they plan to execute it next spring at ConExpo/Con-Agg in Las Vegas with a live demonstration.
2016-07-17
Article
In concert with partner AK Steel, NanoSteel has finally brought its new sheet steel to the production threshold as the industry gobbles high-strength, lighter weight alloys at an increasing rate.
2016-07-15
Article
ZF has initiated the “Wind of Change” campaign to reinforce its supplier base in the Indian market. In an announcement on ZF India Supplier Day, the company said it aims to reach EUR100 million worth of export from India by 2017.
2016-06-28
Article
Linde LLC's Hydroflex atmosphere control system (ACS) is a solution for clean and bright oxide-free annealing of steel, stainless steel, copper, bronze or brass with high reliability and repeatability and is suitable for applications including automotive, aerospace and military components, construction and industrial equipment and electrical systems.
2016-06-28
Article
Renishaw offers an enhanced probing software package that automatically optimizes on-machine measurement cycles to minimize cycle time and maximize productivity.
2016-06-20
Article
In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster. This is allowing industries such as automotive to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-06-11
Article
Novel oxidation ovens could triple production-line throughput while slashing energy use.
2016-05-25
Article
The auto industry's crusade to reduce vehicle weight is creating clever new manufacturing techniques.
2016-05-19
Article
General Motors intends to transform materials-joining technology with a new multi-patented process for spot-welding steel to aluminum
2016-05-19
Article
Sciaky's patented IRISS closed-loop control, which powers its Electron Beam Additive Manufacturing (EBAM) systems, provides consistent process control for part geometry, mechanical properties, microstructure and metal chemistry for large-scale 3D printed parts.
2016-05-17
Article
New vehicles are safer and more efficient thanks in part to the increasing use of new high-strength steels. In this episode of SAE Eye on Engineering, Editor-In-Chief Lindsay Brooke examines the alleged hacking of U.S. Steel development secrets.
2016-05-17
Article
The new version of the MetraSCAN 3D laser scanner from Creaform is 12 times faster than the previous version and can tackle black, multicolored, and shiny surfaces with metrology accuracy for applications directly on the shop floor.
2016-04-25
Article
A maker of expansion valves has demonstrated a significant reduction in A/C compressor workload, benefiting vehicle energy use, by going electronic.
2016-04-20
Article
Steute Industrial Controls offers a comprehensive line of wireless, batteryless limit switches that feature an internal electrodynamic energy generator.
2016-04-20
Article
New advances in manufacturing have allowed Smalley engineers to design and manufacture wave springs and retaining rings as small as 4 mm (0.16 in) in diameter.
2016-04-14
Article
Manufacturing and service teams are discovering ways to use AR technology to handle complex systems like wire harnesses.
2016-04-04
Article
This past November Caterpillar opened its new Additive Manufacturing (AM) Factory at its Tech Center in Mossville, IL, to consolidate and expand its 3D printing activities. AM engineer Brittany Hancock recently gave Off-Highway Engineering a tour of the new facility and discussed the company’s current and future plans regarding the use of 3D printing technology.
Viewing 31 to 60 of 3924

Filter

  • Article
    1410