Criteria

Text:
Content:
Display:

Results

Viewing 1 to 17 of 17
2017-01-30
Book
He Tang
Proven technologies and processes are explored in this examination of modern automotive manufacturing. Fundamentals and applications, as well as new advances are discussed as the author bridges the gap between academic research and industrial practice. Having held positions as both a University Professor and as a Lead Engineering Specialist in industry, the author presents a concise understanding that reflects both technical and managerial perspectives with the aim of providing improvement through practical methods. Each chapter includes review questions and research topics, and, in addition, analysis problems are often included that comprehensively address: • Automotive Industry and Competition • Manufacturing Operations • Joining and Paint Processes • Production Operations and Quality Management • Performance Improvement Directly extracted and summarized from automotive manufacturing practices, this book serves as a fundamental manual.
2015-11-11
Book
George Nicholas Bullen
Fusing aluminum in a multi-material lightweight vehicle is presented via studies on joining dissimilar materials, joining methods, and the performance of the joined materials. The use of aluminum offers a material that embodies properties to meet new standards as the automotive industry continues to pursue improvements in fuel efficiency and emissions. Aluminum’s strength, light weight, and corrosion resistance offers manufacturers a material alternative to steel and an additional material, which has long been known in the industry, to be employed in automotive construction. Topics of technical interest include: • Forming • Galvanic Corrosion • Welding, Fastening, Bonding • Maximizing Weight Benefits Production of strong, lightweight structures will contribute significantly to automobile manufacturers meeting mandated fuel economy standards, as well as customer preferences for utility, comfort, and safety.
2015-10-01
Book
Honda's October 2015 R&D Technical Review features cutting-edge developments and new ways of solving engineering problems from Honda's worldwide R&D teams. This edition brings 14 technical papers covering: • Gasoline engine brake thermal efficiency • Development of new turbocharged diesel engine for Honda CR-V • Downsizing as evolution of high thermal efficiency gasoline engine • Emission reduction technology using secondary air for generator engine • Development of new H2 refueling method for FCV to reduce refueling time • Development of transmission-mounted transmission control unit
2015-02-01
Book
George Krauss
In the second edition of this best-selling book, new information and references are integrated into chapters. Emphasis is still on processing, alloying, microstructure, deformation, fracture and properties of major steel types ranging from low-carbon sheet steels, pearlitic rail and wire steels, to quench and tempered medium- and high-carbon martensitic steels. Microstructural aspects of steelmaking, hardenability, tempering, surface hardening, and embrittlement phenomena are updated, and chapters on stainless and tool steels remain in the second edition. The work is intended to be tutorial and is an essential state-of-the-art reference for anyone that makes, uses, studies and designs with steel.
2011-11-01
Book
F.C. Campbell
Extending ASM's Understanding the Basics series into fabrication technologies, this book is an introduction to the most important industrial joining methods: welding, brazing, soldering, fastening, and adhesive bonding. It addresses metallurgical issues that must be understood during welding, and provides an overview of issues to consider when joining systems of materials that are the same, similar, or different. Topics include: • Introduction to Joining • Arc Welding of Metals • Resistance Welding • Other Fusion Welding Processes • Metallurgical Variables in Fusion Welding • Solid State Welding and Bonding • Brazing and Soldering • Mechanical Fastening • Adhesive Bonding • Material Issues in Joining
2011-09-01
Book
S.T. Peters
Filament winding is the most efficient method of manufacturing composite shapes. This book explores all aspects of filament winding, including capabilities and limitations of the process, fiber and resin handling, winding theory, software and numerical control, and more. Completely revised and updated from the previous version, the book focuses on automation, with five out of nine chapters discuss aspects of filament winding automation. The remaining chapters introduce mechanical testing, pressure vessels, and a description of industrial applications of filament winding. Photos of winding machines, composite fabrication, and end products accompany the text. Engineers, manufacturers, and instructors will appreciate this book’s practical approach.
2010-03-01
Book
P. K. Mallick
Research into the manufacture of lightweight automobiles is driven by the need to reduce fuel consumption to preserve dwindling hydrocarbon resources without compromising other attributes such as safety, performance, recyclability and cost. Materials, Design and Manufacturing for Lightweight Vehicles makes it easier for engineers to learn about the materials being considered for lightweight automobiles, and also compare their characteristics and properties. Part one of this title discusses materials for lightweight automotive structures with chapters on advanced steels for lightweight automotive structures, aluminum alloys, magnesium alloys for lightweight powertrains and automotive structures, thermoplastics and thermoplastic matrix composites and thermoset matrix composites for lightweight automotive structures.
2010-01-01
Book
Tony Anderson
This practical guide to troubleshooting aluminum welding-related problems is based on real-life questions and answers from author Tony Anderson's long-running column in the Welding Journal. The 2nd edition of this book was produced in order to include additional sections that enhance the already comprehensive material that was included in the 1st edition.
2007-04-10
Book
Jwo Pan, Sing C. Tang
Functioning as an introduction to modern mechanics principles and various applications that deal with the science, mathematics and technical aspects of sheet metal forming, Mechanics Modeling of Sheet Metal Forming details theoretically sound formulations based on principles of continuum mechanics for finite or large deformation, which can then be implemented into simulation codes. The forming processes of complex panels by computer codes, in addition to extensive practical examples, are recreated throughout the many chapters of this book in order to benefit practicing engineers by helping them better understand the output of simulation software.
2005-01-01
Book
Fritz Saenger
Aimed at those responsible for the operation of fabrication shops and maintenance/repair facilities, this guide helps the non-welding engineer in the selection of method, materials, and procedures to produce the “desired results and stay out of trouble.” Chapters include: • The Questions (you need to ask) • Key Background Information • What Happens When You Weld • Selection of Proper Welding Filler Metal • Metallurgically-Related Weld Discontinuities (Defects) and Typical Causes • Weld Defects and Causes • Weld Examination and Testing • Postweld Treatments
2005-01-01
Book
Jack R. Barckhoff
This guide provides a systematic approach to welding excellence and cost reduction. Drawing on more than 50 years of welding experience, author Jack R. Barckhoff, P.E., gives you a step by-step plan to maximize the productivity and cost efficiency of your welding operation. Implementing the principles and concepts in this book could save you $15,000 to $35,000 annually per welder, and realize team-wide productivity gains of 20 percent to 50 percent. This book explains the management principles, structure, and details you need to transform your welding operation from a cost center into a profit center. A must-read for supervisors, managers, and executives.
2004-01-01
Book
Kirt Williams, Nadim Maluf
Bringing you up-to-date with the latest developments in MEMS technology, this major revision of the best-selling An Introduction to Microelectromechanical Systems Engineering offers you a current understanding of this cutting-edge technology. You gain practical knowledge of MEMS materials, design, and manufacturing, and learn how it is being applied in industrial, optical, medical and electronic markets. The second edition features brand new sections on RF MEMS, photo MEMS, micromachining on materials other than silicon, reliability analysis, plus an expanded reference list. With an emphasis on commercialized products, this unique resource helps you determine whether your application can benefit from a MEMS solution, understand how other applications and companies have benefited from MEMS, and select and define a manufacturable MEMS process for your application. You discover how to use MEMS technology to enable new functionality, improve performance, and reduce size and cost.
2001-01-01
Book
F. R. (Bob) Schneider
Frank Armao, group leader nonferrous applications at The Lincoln Electric Company, wrote this Guide. Armao drew rave reviews when he invited members of the AWS D1G Subcommittee on Aluminum Structures, on which he serves, to review the text. With an emphasis on common, effective practices in high volume situations, it covers mechanical properties of aluminum affected by welding alloy and temper designations filler metal selection prewelding preparation GTAW, GMAW, and SMAW defects and discontinuities and problems in qualifying welding procedures.
2001-01-01
Book
F. R. (Bob) Schneider
The author of this reference guide, F.R. (Bob) Schneider, Jr., shares his tried and proven experiences in aluminum welding. This guide concentrates on obtaining high quality aluminum weldments with the fusion process, in particular gas tungsten arc welding (GTAW), electron beam welding (EBW), and gas metal arc welding (GMAW).
1999-01-01
Book
Ted V. Weber
Expert witness and AWS lecturer Ted V. Weber draws upon his lengthy experience as a materials troubleshooter for DuPont to present this succinct introduction to basic corrosion mechanisms. It includes pitting, intergranular corrosion, stress corrosion cracking, erosion, crevice and galvanic corrosion, and selective leaching. Full color digital photos illustrate the costly destruction caused by corrosion in welds. The author offers clear advice on how to avoid and correct corrosion, including alloying for resistance.
1999-01-01
Book
Eugene G. Hornberger
Titanium need not be all that hard to weld! In industrial sectors the common opinion is that titanium alloys are difficult to weld. While it is true that titanium alloys can be embrittled by carless welding techniques, it is equally true that these materials are much more weldable than their reputation suggests. This reference guide discusses the difficulties that originate from several basic sources when welding titanium and titanium alloys. The high reactivity of titanium with other materials, poor cleaning of parts before joining, and inadequate protection during welding can lead to contamination, porosity and embrittlement of the completed joints. Topics Covered: • Weld Cleaning • Gas Shield Arc Welding Processes • Gas Tungsten Arc Welding • Gas Metal Arc Welding • Plasma Arc Welding • Other Welding Processes
1999-01-01
Book
Ted V. Weber
If you’re not ready for the depth of George Linnert’s "Welding Metallurgy", then this guide is for you. An intelligent introduction for the engineer new to welding, and the up-and-coming senior technician, this guide offers some basics that will aid the non-metallurgist in understanding why problems occur, and how to avoid them. Tables and figures support these topics: • Metal Structures • Metal Forms • Diffusion • Solid Solubility • Residual Stress • Shielding and Purging • Phase Transformation • Hardness and Hardenability • Grain Size • Stainless Steels • Aluminum and its Alloys • Copper and its Alloys • Refractory Alloys • Repair Welding
Viewing 1 to 17 of 17

    Filter

    • Book
      17