Criteria

Text:
Sector:
Category:
Display:

Results

Viewing 1 of 1
2016-02-18 ...
  • February 18-19, 2016 (8:30 a.m. - 4:30 p.m.) - Warrendale, Pennsylvania
  • April 11-12, 2016 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • July 26-27, 2016 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • December 12-13, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Project Management and Advanced Product Quality Planning (APQP) are two critical techniques used in product development in the mobility industry today. This seminar will bring these techniques together in an easy to understand format that goes beyond the typical concept of constructing timelines and project planning, by exploring not only the AIAG APQP process, but also specific aspects of PM processes. Students will gain a solid foundation in the essential principles of Project Management and APQP.
2016-02-24 ...
  • February 24-26, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 12-14, 2016 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 8-10, 2016 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • November 14-16, 2016 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
2016-03-03 ...
  • March 3-4, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 22-23, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm In the past few decades, product liability law has dramatically changed the manufacturer's outlook in the design and manufacture of product. The concept of safety and reliability has been altered from a purely engineering/manufacturing concept to a legal/manufacturing approach. This new approach requires an understanding of legal concepts as related to the manufacturing and design process. The engineer's role has shifted to include a safety audit analysis to minimize the existence of a product defect and/or to defend the product in a way that is responsive to the legal concerns.
2016-03-14 ...
  • March 14-18, 2016 (8:00 a.m. - 5:00 p.m.) - Troy, Michigan
  • August 8-12, 2016 (8:00 a.m. - 5:00 p.m.) - Troy, Michigan
  • November 14-18, 2016 (8:00 a.m. - 5:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
View an Interview with Lead Coach Atul Kalia Why a Management Academy? Why should you be interested in this Engineering Management Academy from SAE? The answer to these questions lies in the statistics highlighted by surveys of hiring managers. For example, are you aware that: 28% of internal leadership promotions fail On average, it takes six years before an individual receives any formal training after being promoted to a management position Individual contributors, who are technical experts, are usually natural candidates for promotions to management positions.
2016-04-01 ...
  • April 1, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 11, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Electric and hybrid vehicles are becoming more visible on today's roadways and the automotive companies are working hard to make these vehicles as transparent as possible to enhance consumer acceptance. The battery system forms a key part of any of these vehicles and is probably the least understood. With practically no moving parts the battery systems show no visible or audible warning of any latent dangers. This seminar will introduce participants to the risks encountered in handling high voltage battery systems and their component parts.
2016-04-07 ...
  • April 7-8, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 22-23, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 29-30, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Product development is organizationally a complex undertaking that requires effective coordination within a company and between companies. During product development, teams are confronted with a number of ongoing organizational challenges and there is a high potential for conflict between participants in the process. This course addresses teamwork and other "soft-side" factors that largely determine whether product development programs are successfully completed on schedule. The content is relevant for both OEMs and suppliers.
2016-04-11 ...
  • April 11-13, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 8-10, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 21-23, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
In today's corporate environment of shrinking budgets, required structural cost reductions, sharing of global designs/services, and pricing pressures, it is critical that engineers possess a working knowledge of engineering economics principles. To fully understand the economic viability of engineering decisions, engineers need to find the appropriate balance between design alternatives, resulting costs, and impact on their enterprise. This seminar introduces participants to the cost, finance and economic concepts and their applications to products and services.
2016-04-11 ...
  • April 11, 2016 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • November 7, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
It is a well-known fact that the number of women in science, engineering and business fields is growing, yet men continue to outnumber women, especially at the upper levels of these professions. Many women appear to encounter a series of challenges at early or midcareer stages that contribute to them leaving their careers prematurely due to feelings of isolation, an unsupportive work environment, extreme work schedules, and unclear rules about advancement and success.
2016-04-11 ...
  • April 11-12, 2016 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • October 17-18, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Hybrid Electric Vehicle (HEV) and Battery Electric Vehicle (BEV) technology model offerings and production volumes continue to accelerate with each model year. Advanced technology vehicle populations are significantly increasing throughout the world, making it vital for engineers, technicians, and educators to have a thorough understanding of these technologies and systems.
2016-04-12 ...
  • April 12-13, 2016 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • October 25-26, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Organizations are becoming increasingly aware of the importance of developing secure software. This seminar introduces students to the concepts of software assurance which have direct application in all software industries, including automotive and aerospace sectors. The intent of the seminar is to give students an appreciation of the technical challenges associated with software assurance while developing the technical skills necessary to engineer secure software. Performing input validation is imperative when developing secure software systems as this seminar will demonstrate.
2016-04-13 ...
  • April 13-15, 2016 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 15-17, 2016 (8:30 a.m. - 4:30 p.m.) - Rosemont, Illinois
  • December 5-7, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
In the fast paced and competitive environment of today's global economy, the work of technical professionals is often the difference between success and failure in an organization. Providing leadership for engineers is uniquely challenging, and the transition from working engineer to first-line technical supervisor is one of the most difficult career challenges that an engineer may face. First-time engineering supervisors and mid-level managers who wish to sharpen their skills and learn new techniques for guiding, coaching, and motivating working engineers, technicians, and designers will find this seminar valuable.
2016-04-14 ...
  • April 14-15, 2016 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • October 27-28, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Embedded hardware is everywhere you look today from your vehicle’s infotainment system to refrigerator to medical devices and everything else in-between. With so much exposure one would think that such devices are secure against attack; however, sadly for a large number of devices this is not the case. For proof, just look no further than your local news reports. They are full of reports on devices being hacked into. So, as engineers, how do we go about first identifying and mitigating (or capitalizing) the potential security vulnerabilities within these devices?
2016-04-21 ...
  • April 21, 2016 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • September 23, 2016 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of geometric dimensioning and tolerancing fundamentals, this course teaches the significant revisions, additions, and deletions prescribed in the new ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course offers an in-depth explanation of new features in the 2009 standard and compares them to the 1994 Standard. Newly acquired learning is reinforced throughout the class with numerous practice problems, and a set of comprehensive comparison charts that highlight itemized changes in the standard are included in the workshop price.
2016-04-22 ...
  • April 22, 2016 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of Y14.5 Dimensioning and Tolerancing practices, this course explains the major differences between the ASME and ISO standards in a concise, easily understood manner. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, the course focuses on how the standards compare when dealing with symbols, feature control frames, tolerances, form controls, datums, and more. Newly acquired learning is reinforced throughout the class with numerous practice problems.
2016-05-05 ...
  • May 5-6, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 16-17, 2016 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
This course presents a proven eight-step method for program planning and control, including: definition of customers' requirements, roles of the program team, determination and flowcharting of program tasks, scheduling and costing, quality aspects of critical tasks, and risk management. Easy to grasp, each of the eight steps evolve from common-sense questions that should be answered for any program, regardless of size or complexity.
2016-05-09 ...
  • May 9-11, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 2-4, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
As a strategic leader, it is your responsibility to ensure that your organization is moving in the right direction. Executives and high-level managers must have the practical insight necessary to address competitive business challenges. Each segment of this three day course is designed to impart simple, but powerful lessons that will equip participants to more fully engage in strategic discussions, ask pertinent questions, facilitate critical decisions and shape high performing organizations. In addition, the course provides students with a personal leadership profile that illustrates their strengths and potential limitations.
2016-05-16 ...
  • May 16, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This information-packed seminar focuses on the intricacies of patents, patent infringement litigation and patent licensing. Attendees will explore the important subjects of obtaining U.S. and foreign patents, maintaining U.S. and foreign patent rights, enforcing patent rights, defending against patent rights asserted by competitors, and licensing patent rights for revenue. After this seminar, you will effectively understand patents and ways to protect your company's valuable inventions. Your new knowledge will help your company maintain and enhance its position in the marketplace.
2016-05-18 ...
  • May 18-19, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 21-22, 2016 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches how to use engineering drawings that use the International Standards Organization (ISO) standards. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course will teach you to recognize what is required on a standard-compliant drawing and recognize geometrical tolerances based on the ISO standards. The course combines information from dozens of ISO standards into a logical understandable topic. Newly acquired learning is reinforced throughout the class with more than 150 practice problems.
2016-06-02 ...
  • June 2-3, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Around the world, and more often than not, government bodies require formal certification of products. As product developers expand into new markets, they will be confronted with new standards, regulations, and customer expectations that may require new compliance processes. A properly run compliance program improves your product’s quality and safety, broadens your product’s market, ensures compliance with regulations and laws, and helps provide protection from future product liability issues. This two-day seminar presents a process development methodology that can be used repeatedly as new compliance requirements emerge.
2016-06-06 ...
  • June 6-7, 2016 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
2016-06-27 ...
  • June 27-28, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm According to the Federal Rules of Evidence, an expert witness is anyone who can assist the trier of fact (the jury) in understanding any issue in dispute at trial. The witness' ability to give this assistance can be derived from any specialized training, education, background, or experience. To be effective in providing this assistance, however, requires that the expert witness understand the true role that he or she is to play both before and at the trial.
2016-07-28 ...
  • July 28-29, 2016 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • December 1-2, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 12:30 pm In today’s highly competitive and liability minded environment, Design Reviews (DR) are a must for all major mobility industries such as Automotive, DOD, Aerospace, Agriculture, Recreation, Marine and Rail. While Design Reviews are becoming increasingly important in product liability litigation, they also serve as an effective way to transfer organizational best practices for specific concerns and issues.
Training / Education Classroom Seminars
New energy requirements for China’s vehicle market are significantly increasing battery system development. This rapid increase in battery development is elevating the importance of optimized battery system design, integration, and validation. Once the vehicle platform is determined, the vehicle must realize benefits from an optimized battery system design that includes enhanced acceleration speed, stable performance, long life, and desired range.
Training / Education Classroom Seminars
Providing you have a basic understanding of Y14.5 Dimensioning and Tolerancing practices, this course explains the fundamental definitions, concepts, and methods from the ASME Y14.41 Standard on Digital Product Definition Data Practices. Utilizing the expertise of world-renowned GD&T expert and former Chairman of the Y14.41 Committee, Alex Krulikowski, the course focuses on understanding the benefits of a math-based product development process. Newly acquired learning is reinforced throughout the class with numerous practice problems.
Viewing 1 of 1