Criteria

Text:
Display:

Results

Viewing 1 to 30 of 43
2017-10-26 ...
  • October 26-27, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
Training / Education Classroom Seminars
This course is offered in China only. More and more stringent emission and fuel consumption regulations are pushing the automotive industry towards electrified powertrain and electrified vehicles. This is particularly evident in China, where there is an increased demand for electric (EV) and hybrid electric vehicles (HEV). Infrastructure is being built across the country for convenient charging. It must now be determined how to meet the technical targets for EV/HEV regulations under economic constraints and how to best develop the major ePowertrain components (battery and motor).
2017-09-29 ...
  • September 29-30, 2017 (8:30 a.m. - 4:30 p.m.) - Ft. Worth, Texas
Training / Education Classroom Seminars
The rapidly evolving demand for cost reductions and shrinking budgets makes the application and use of automated processes within the aerospace and space industries a necessity. While some view aerospace automation as the solution to reducing costs, others view automation technologies and processes as something that should be avoided when possible. Misunderstandings and assumptions about these complex systems can result in the improper selection and application of these systems, often leading to undesirable interactions with other elements of the assembly process and potentially, project failure.
2017-09-25 ...
  • September 25-29, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
  • October 16-20, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
  • November 6-10, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
Training / Education Classroom Engineering Academies
Tuning the multiple electronic variables to ensure that a vehicle's engine performs according to its mission profile ultimately relies upon a competent calibrator. Because proper calibration is such a critical aspect of customer satisfaction, skilled calibrators are in high demand in the auto industry. This Academy is designed to provide a foundation for those interested in becoming calibration engineers. Starting with an introduction to calibration and calibration tools, this Academy covers a range of topics that will provide learners with an understanding of general calibration work flow.
2017-09-14 ...
  • September 14-15, 2017 (8:30 a.m. - 4:03 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Hybrid Electric Vehicle (HEV) and Battery Electric Vehicle (BEV) technology model offerings and production volumes continue to accelerate with each model year. Advanced technology vehicle populations are significantly increasing throughout the world, making it vital for engineers, technicians, and educators to have a thorough understanding of these technologies and systems.
2017-09-07 ...
  • September 7-8, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm According to the Federal Rules of Evidence, an expert witness is anyone who can assist the trier of fact (the jury) in understanding any issue in dispute at trial. The witness' ability to give this assistance can be derived from any specialized training, education, background, or experience. To be effective in providing this assistance, however, requires that the expert witness understand the true role that he or she is to play both before and at the trial.
2017-09-07 ...
  • September 7-19, 2017 (4 Sessions) - Live Online
Training / Education Online Web Seminars
Any product is a collection of materials that have been manipulated into various shapes to form the components and joints used within the product. In fact, up to 70% of the cost to make a product is due to its materials. Therefore, getting the materials right will have a big impact on the success of a product.
2017-07-17 ...
  • July 17-18, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This course presents a proven eight-step method for program planning and control, including: definition of customers' requirements, roles of the program team, determination and flowcharting of program tasks, scheduling and costing, quality aspects of critical tasks, and risk management. Easy to grasp, each of the eight steps evolve from common-sense questions that should be answered for any program, regardless of size or complexity.
2017-05-15 ...
  • May 15-19, 2017 (8:00 a.m. - 5:00 p.m.) - Troy, Michigan
  • November 13-17, 2017 (8:00 a.m. - 5:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
View an Interview with Lead Coach Atul Kalia Why a Management Academy? Why should you be interested in this Engineering Management Academy from SAE? The answer to these questions lies in the statistics highlighted by surveys of hiring managers. For example, are you aware that: 28% of internal leadership promotions fail On average, it takes six years before an individual receives any formal training after being promoted to a management position Individual contributors, who are technical experts, are usually natural candidates for promotions to management positions.
2017-05-11 ...
  • May 11-12, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 19-20, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 12:30 pm In today’s highly competitive and liability minded environment, Design Reviews (DR) are a must for all major mobility industries such as Automotive, DOD, Aerospace, Agriculture, Recreation, Marine and Rail. While Design Reviews are becoming increasingly important in product liability litigation, they also serve as an effective way to transfer organizational best practices for specific concerns and issues.
2017-05-08 ...
  • May 8-12, 2017 (3 Sessions) - Live Online
  • August 21-25, 2017 (3 Sessions) - Live Online
  • November 27-December 1, 2017 (3 Sessions) - Live Online
Training / Education Online Web Seminars
Connected vehicles are increasingly seen as a target for cybersecurity attacks. A key differentiator for the automotive industry is the use of cyber-physical systems, where a successful cybersecurity attack can affect physical entities. Often involving embedded electronics and real time control, these systems require different solutions in addition to established IT security principles and reactive responses to threats. Cybersecurity needs to be designed and built into cyber-physical systems throughout the development lifecycle to provide defense in depth.
2017-05-08 ...
  • May 8-9, 2017 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • June 5-6, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • October 16-17, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
Training / Education Classroom Seminars
ARP4754A substantially revises the industry guidance for the development of aircraft and aircraft systems while taking into account the overall aircraft operating environment and functions. This development process includes validation of requirements and verification of the design implementation for certification and product assurance. ARP4754A provides the practices for showing compliance with regulations and serves to assist companies in developing and meeting its own internal standards though application of the described guidelines.
2017-05-04 ...
  • May 4, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 26, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Electric and hybrid vehicles are becoming more visible on today's roadways and the automotive companies are working hard to make these vehicles as transparent as possible to enhance consumer acceptance. The battery system forms a key part of any of these vehicles and is probably the least understood. With practically no moving parts the battery systems show no visible or audible warning of any latent dangers. This seminar will introduce participants to the risks encountered in handling high voltage battery systems and their component parts.
2017-05-01 ...
  • May 1-3, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 30-November 1, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
As a strategic leader, it is your responsibility to ensure that your organization is moving in the right direction. Executives and high-level managers must have the practical insight necessary to address competitive business challenges. Each segment of this three day course is designed to impart simple, but powerful lessons that will equip participants to more fully engage in strategic discussions, ask pertinent questions, facilitate critical decisions and shape high performing organizations. In addition, the course provides students with a personal leadership profile that illustrates their strengths and potential limitations.
2017-04-26 ...
  • April 26-27, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 18-19, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Organizations are becoming increasingly aware of the importance of developing secure software. This seminar introduces students to the concepts of software assurance which have direct application in all software industries, including automotive and aerospace sectors. The intent of this seminar is to give students an appreciation of the technical challenges associated with software assurance while developing the technical skills necessary to engineer secure software. Performing input validation is imperative when developing secure software systems as this seminar will demonstrate.
2017-04-24 ...
  • April 24-28, 2017 (8:00 a.m. - 6:00 p.m.) - Troy, Michigan
Training / Education Classroom Engineering Academies
The Transmission Engineering Academy covers the sciences of automotive passenger car and light truck engineering principles and practices necessary to effectively understand, develop, specify and start the design process. Topics include advances in manual, automatic, automated manual, and continuously variable transmission technology, materials and processes applicable to the major components within these transmissions, calibration of these systems unto themselves and integration into the full vehicle powertrain.
2017-04-24 ...
  • April 24-May 5, 2017 (6 Sessions) - Live Online
Training / Education Online Web Seminars
Automotive projects continue to grow in complexity. Studies provide a glimpse into the attributes of product development projects that have a high likelihood of failure. Knowing these attributes, the approach to the project can be structured to reduce the risks. For example, the scope of the project may already place the project at risk. Understanding the risks associated with the scope enables you to either reconsider the scope or work out strategies that will eliminate or at least mitigate the risks. In addition, your approach or strategy selected to meet the project demands will have significant impact on the results.
2017-04-24 ...
  • April 24-25, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 16-17, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Embedded hardware is everywhere you look today from your vehicle’s infotainment system to refrigerator to medical devices and everything else in-between. With so much exposure one would think that such devices are secure against attack; however, sadly for a large number of devices this is not the case. For proof, just look no further than your local news reports. They are full of reports on devices being hacked into. So, as engineers, how do we go about first identifying and mitigating (or capitalizing) the potential security vulnerabilities within these devices?
2017-04-21 ...
  • April 21-22, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
Training / Education Classroom Seminars
New energy requirements for China’s vehicle market are significantly increasing battery system development. This rapid increase in battery development is elevating the importance of optimized battery system design, integration, and validation. Once the vehicle platform is determined, the vehicle must realize benefits from an optimized battery system design that includes enhanced acceleration speed, stable performance, long life, and desired range.
2017-04-19 ...
  • April 19-21, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • August 2-4, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 15-17, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
In today's corporate environment of shrinking budgets, required structural cost reductions, sharing of global designs/services, and pricing pressures, it is critical that engineers possess a working knowledge of engineering economics principles. To fully understand the economic viability of engineering decisions, engineers need to find the appropriate balance between design alternatives, resulting costs, and impact on their enterprise. This seminar introduces participants to the cost, finance and economic concepts and their applications to products and services.
2017-04-18 ...
  • April 18-27, 2017 (4 Sessions) - Live Online
  • October 17-26, 2017 (4 Sessions) - Live Online
Training / Education Online Web Seminars
Tough times require searching for things that we can change and making them better. But so often problems are solved with 'band-aids' and not root cause solutions. This approach is getting too expensive and at best only helps companies tread water. To combat these issues and adopt a fresh approach, teams can use the methods and tools of Root Cause Problem Solving to first view problems as opportunities for improvement, identify root causes and implement solutions to prevent recurrence. Benefits include improved quality and customer satisfaction, reduced operation costs, and greater employee knowledge of work processes.
2017-04-18 ...
  • April 18-19, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches how to use engineering drawings that use the International Standards Organization (ISO) standards. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course will teach you to recognize what is required on a standard-compliant drawing and recognize geometrical tolerances based on the ISO standards. The course combines information from dozens of ISO standards into a logical understandable topic. Newly acquired learning is reinforced throughout the class with more than 150 practice problems.
2017-04-06 ...
  • April 6-7, 2017 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • November 14-15, 2017 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm In the past few decades, product liability law has dramatically changed the manufacturer's outlook in the design and manufacture of product. The concept of safety and reliability has been altered from a purely engineering/manufacturing concept to a legal/manufacturing approach. This new approach requires an understanding of legal concepts as related to the manufacturing and design process. The engineer's role has shifted to include a safety audit analysis to minimize the existence of a product defect and/or to defend the product in a way that is responsive to the legal concerns.
2017-04-04 ...
  • April 4-6, 2017 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • August 28-30, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 11-13, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
In the fast paced and competitive environment of today's global economy, the work of technical professionals is often the difference between success and failure in an organization. Providing leadership for engineers is uniquely challenging, and the transition from working engineer to first-line technical supervisor is one of the most difficult career challenges that an engineer may face. First-time engineering supervisors and mid-level managers who wish to sharpen their skills and learn new techniques for guiding, coaching, and motivating working engineers, technicians, and designers will find this seminar valuable.
2017-04-03 ...
  • April 3, 2017 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
Training / Education Classroom Seminars
It is a well-known fact that the number of women in science, engineering and business fields is growing, yet men continue to outnumber women, especially at the upper levels of these professions. Many women appear to encounter a series of challenges at early or midcareer stages that contribute to them leaving their careers prematurely due to feelings of isolation, an unsupportive work environment, extreme work schedules, and unclear rules about advancement and success.
2017-04-03 ...
  • April 3-4, 2017 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
Training / Education Classroom Seminars
The ability to write concise and unambiguous reports, proposals, manuals, or other technical documents is a key skill for any high-functioning engineer or technical staff person in the mobility industries. Through a combination of class discussions, interactive workshop activities, assignments, checker teams (review teams) and job aids, this course delivers real-life technical writing techniques and tools that can be immediately applied. Attendees discover the importance of knowing their audiences and how to communicate technical information in a "user-friendly" style.
2017-04-03 ...
  • April 3, 2017 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
Training / Education Classroom Seminars
The automotive industry is the new "battleground" for cybersecurity. Following the path of desktops/laptops, tablets, and mobile phones, the automotive industry is now the "hot" area for both academic researchers and hackers. This will transform the automotive industry just as it transformed traditional information technology and the mobile markets; it is inescapable, but it can be beneficial and a well prepared company can find significant benefit in being a market leader. What does cybersecurity mean? Who is attacking and why? What must we change? What can stay the same? What is the larger organization's role in cyber?
2017-03-21 ...
  • March 21-22, 2017 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
  • June 13-14, 2017 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • October 24-25, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
Training / Education Classroom Seminars
The task of certifying an aircraft or part can be overwhelming given the lengthy process and the many steps that are required. Understanding the process can greatly enhance the outcome and reduce unnecessary delays or frustrations. This course will provide an overview of the Federal Aviation Administration (FAA) organizational structure, its policies, guidelines and requirements leading to Type and Supplemental Type airworthiness approvals. It will also cover the rule-making process and rules applicable to aircraft parts and products.
2017-03-21 ...
  • March 21-23, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • May 25-27, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • June 27-29, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • October 25-27, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • December 5-7, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
2017-03-09 ...
  • March 9-10, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • June 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 5-6, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Product development is organizationally a complex undertaking that requires effective coordination within a company and between companies. During product development, teams are confronted with a number of ongoing organizational challenges and there is a high potential for conflict between participants in the process. This course addresses teamwork and other "soft-side" factors that largely determine whether product development programs are successfully completed on schedule. The content is relevant for both OEMs and suppliers.
2017-02-23 ...
  • February 23-24, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • March 8-9, 2017 (8:30 a.m. - 4:30 p.m.) - Livonia, Michigan
  • September 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Ft. Worth, Texas
Training / Education Classroom Seminars
Providing you have a basic understanding of mechanical drawings, this course teaches the terms, rules, symbols, and concepts of GD&T as prescribed in the ASME Y14.5-2009 Standard. Utilizing the expertise of world-renowned GD&T expert Alex Krulikowski, this course offers an in-depth explanation of geometric tolerancing symbols, their tolerance zones, applicable modifiers, common applications, and limitations. The class includes a comparison of GD&T to coordinate tolerancing; Rules #1 and #2; form and orientation controls; tolerance of position; runout and profile controls.
Viewing 1 to 30 of 43