Criteria

Text:
Content:
Display:

Results

Viewing 1261 to 1279 of 1279
HISTORICAL
1970-10-01
Standard
J187_197010
This SAE Recommended Practice has been established to provide direction for the design and installation of a vehicle identification number assigned to a truck or truck-tractor. In adhering to these standards, facility of application in factory production and appearance are matters for manufacturer control.
HISTORICAL
1970-07-01
Standard
J185_197007
Minimum criteria are provided for steps, stairways, ladders, walkways, platforms, handrails, handholds, guardrails, and entrance openings which permit ingress to and egress from operator, inspection, maintenance or service platforms on off-road work machines parked in accordance with the manufacturer's instructions. This SAE Recommended Practice pertains to off-road self-propelled work machines used in construction, general purpose industrial, agricultural (agricultural tractors only), forestry and specialized mining machinery categories as defined in SAE J1116 JUN86. It also pertains to specialized off-road machines used in mining such as shovels, draglines, and drills not identified in SAE J1116 JUN86. The minimum criteria established herein is based on one unladen person using the access system at any one time.
HISTORICAL
1970-05-01
Standard
J670B_197005
The vehicle dynamics terminology presented herein pertains to passenger cars and light trucks with two axles and to those vehicles pulling single-axle trailers. The terminology presents symbols and definitions covering the following subjects: axis systems, vehicle bodies, suspension and steering systems, brakes, tires and wheels, operating states and modes, control and disturbance inputs, vehicle responses, and vehicle characterizing descriptors. The scope does not include terms relating to the human perception of vehicle response.
HISTORICAL
1970-02-01
Standard
J843C_197002
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of new light-duty trucks and new multipurpose passenger vehicles up to and including 2700 kg (6000 lb) GVW and all classes of new passenger cars. The purpose of the test code is to establish brake system capabilities with regard to: a. Deceleration versus input, as affected by vehicle speed, brake temperature, and usage; b. brake system integrity; c. Stopping ability during emergency or inoperative power assist conditions; d. Water recovery characteristics.
HISTORICAL
1969-12-01
Standard
J129_196912
This SAE Recommended Practice has been established to provide direction for the design and installation of an identification number as assigned to passenger car and truck engines and transmissions. In adhering to these recommended practices, facility of application in factory production and appearance are matters for manufacturer control. Reference SAE J853.
HISTORICAL
1969-06-01
Standard
J393_196906
This SAE Recommended Practice establishes uniform engineering nomenclature for wheels, hubs, rims, and their components used in truck, bus, and trailer applications. This nomenclature and accompanying drawings are intended to define functional truck wheel, hub, and rim designs. The International Standard (ISO) nomenclature is shown in parentheses when different than SAE J393.
HISTORICAL
1969-03-01
Standard
J387_196903
This SAE Recommended Practice provides definitions of common terms used in SAE Technical Reports pertaining to motor vehicle lighting. It covers not only basic lighting terms but also terms which identify major segments of technical reports.
HISTORICAL
1969-03-01
Standard
J386_196903
This standard provides performance and test requirements for operator restraint systems provided for off-road self-propelled work machines. This document applies to pelvic restraint systems (Type 1) for off-road, self-propelled work machines fitted with ROPS and commonly used in construction, earthmoving, forestry, and mining as referred to in SAE J1040 and industrial machines fitted with ROPS as referred to in SAE J1042.
HISTORICAL
1969-01-01
Standard
J843B_196901
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of new light-duty trucks and new multipurpose passenger vehicles up to and including 2700 kg (6000 lb) GVW and all classes of new passenger cars. The purpose of the test code is to establish brake system capabilities with regard to: a. Deceleration versus input, as affected by vehicle speed, brake temperature, and usage; b. brake system integrity; c. Stopping ability during emergency or inoperative power assist conditions; d. Water recovery characteristics.
HISTORICAL
1968-07-01
Standard
J686A_196807
This SAE Standard establishes basic dimensions for motor vehicle license plates. It is based on data supplied by the American Association of Motor Vehicle Administrators, Motor Vehicle manufacturers Association, and Motorcycle, Scooter and Allied Trades Association. The dimensions established in this document have considered legibility and identification of the license plate.
HISTORICAL
1967-08-01
Standard
J901A_196708
The following definitions and illustrations are intended to establish common nomenclature and terminology for universal joints and driveshafts used in various driveline applications. In addition, useful guidelines are included for the application of universal joints and driveshafts. For more specific details, see Universal Joint and Driveshaft Design Manual, AE-7.
HISTORICAL
1966-08-01
Standard
J966_196608
This SAE Recommended Practice provides a test procedure for determining passenger car tire revolutions per mile. It is intended to supplement SAE J678.
HISTORICAL
1965-09-01
Standard
J843A_196509
This SAE Recommended Practice establishes a uniform procedure for the level road test of the brake systems of new light-duty trucks and new multipurpose passenger vehicles up to and including 2700 kg (6000 lb) GVW and all classes of new passenger cars. The purpose of the test code is to establish brake system capabilities with regard to: a. Deceleration versus input, as affected by vehicle speed, brake temperature, and usage; b. brake system integrity; c. Stopping ability during emergency or inoperative power assist conditions; d. Water recovery characteristics.
CURRENT
1964-10-30
Standard
AIR837
HISTORICAL
1963-11-01
Standard
J876_196311
This SAE Recommended Practice establishes uniform engineering nomenclature for wide base disc wheels and demountable rims. This nomenclature and accompanying figures are intended to define fundamental wide base disc wheels and demountable rim terms. The dimensions given are those necessary to maintain serviceability and interchangeability of the wide base disc wheels and demountable rims with standard hardware. Valve clearances have not been included in this document.
HISTORICAL
1962-06-01
Standard
J831_196206
This SAE Standard contains the industry standard definitions for electrical equipment used in the generation of electric power onboard today's conventional road vehicles. It is intended to complement the electronic terminology that was formerly documented in SAE J1213 (canceled) and/or in other industry glossaries of electrical/electronic devices.
CURRENT
1961-06-01
Standard
ARIR407-1
The Synchro System Manual provides valuable information to designers and maintainers of avionics equipment that employ synchro devices. Synchro theory, synchro applications and signal definitions are included in this standard. Originally published in 1950, it is considered to be the classic guide for synchro devices. The Synchro System Manual provides valuable information to designers and maintainers of avionics equipment that employ synchro devices. Synchro theory, synchro applications and signal definitions are included in this standard. Originally published in 1950, it is considered to be the classic guide for synchro devices. The Synchro System Manual provides valuable information to designers and maintainers of avionics equipment that employ synchro devices. Synchro theory, synchro applications and signal definitions are included in this standard. Originally published in 1950, it is considered to be the classic guide for synchro devices.
CURRENT
1960-06-01
Standard
AS509A
Viewing 1261 to 1279 of 1279