Display:

Results

Viewing 1 to 30 of 699
2017-05-10
Technical Paper
2017-01-1927
Andreas Graef
China’s construction equipment (CE) market has been shrinking since 2011 with only few machinery segments gaining sales in last few years. Most of China’s CE machinery segments are already highly concentrated with few major Chinese CE OEMs contributing the majority of sales volume in each machinery segment. Machinery segments with more advanced technology such as crawler excavators see the rise of Chinese CE OEM competing with their international peers on market shares. Chinese full-liner OEMs are expected to shift their global M&A strategies in light of China’s enforced governmental control of capital outflows and increased scrutiny over the authenticity and compliance of overseas investments. With this market and competitor dynamics in China, the key question for international CE powertrain system and component supplier is how Chinese CE OEM and engine supplier develop and source their key powertrain components in future.
2017-05-10
Technical Paper
2017-01-1922
Wolfgang Burget
Highly diversified market needs, non-harmonized regulations and new technological trends in future construction machinery industry will challenge OEMs in defining their appropriate development strategies. Main trends like “efficiency”, “safety/security” as well as “connectivity” are considered as important driving forces in future product - and customer service - developments. Some examples are given for the above mentioned trends. Chances and related risks of such development trends are considered as well.
2017-03-28
Technical Paper
2017-01-1531
Keiichi Taniguchi, Akiyoshi Shibata, Mikako Murakami, Munehiko Oshima
Abstract This paper describes a study of drag reduction devices for production pick-up trucks with a body-on-frame structure using full-scale wind tunnel testing and Computational Fluid Dynamics (CFD) simulations. First, the flow structure around a pick-up truck was investigated and studied, focusing in particular on the flow structure between the cabin and tailgate. It was found that the flow structure around the tailgate was closely related to aerodynamic drag. A low drag flow structure was found by flow analysis, and the separation angle at the roof end was identified as being important to achieve the flow structure. While proceeding with the development of a new production model, a technical issue of the flow structure involving sensitivity to the vehicle velocity was identified in connection with optimization of the roof end shape. (1)A tailgate spoiler was examined for solving this issue.
2017-03-28
Technical Paper
2017-01-0894
Nishant Singh
Abstract Improving fuel economy has been a key focus across the automotive industry for several years if not decades. For heavy duty commercial vehicles, the benefits from minor gains in fuel economy can lead to significant savings for fleets as well as owners and operators. Additionally, the regulations require vehicles to meet certain GHG standards which closely translate to vehicle fuel economy. For current state of the art fuel economy technologies, incremental gains are so miniscule that measurements on the vehicle are inadequate to quantify the benefits. Engineers are challenged with high level of variability to make informed decisions. In such cases, highly controlled tests on Engine and Powertrain dynamometers are used, however, there is an associated variability even with these tests due to factors such as part to part differences, deterioration, fuel blends and quality, dyno control capabilities and so on.
2017-03-28
Technical Paper
2017-01-0455
Harshad Hatekar, Baskar Anthonysamy, V. Saishanker, Lakshmi Pavuluri, Gurdeep Singh Pahwa
Abstract Structural elastomer components like bushes, engine mounts are required to meet stringent and contrasting requirements of being soft for better NVH and also be durable at different loading conditions and different road conditions. Silent block bushes are such components where the loading in radial direction of bushes are high to ensure the durability of bushes at high loads, but has to be soft on torsion to ensure good NVH. These requirements present with unique challenge to optimize the leaf spring bush design, stiffness and material characteristics of the rubber. Traditionally, bushes with varying degree of stiffness are selected, manufactured and tested on vehicle and the best one is chosen depending on the requirements. However, this approach is costly, time consuming and iterative. In this study, the stiffness targets required for the bush were analysed using static and dynamic load cases using virtual simulation (MSC.ADAMS).
2017-03-28
Technical Paper
2017-01-0200
Hongwei Zhang, Liangjin Gui, Zijie Fan
Abstract Road test simulation on test rig is widely used in the automobile industry to shorten the development circles. However, there is still room for further improving the time cost of current road simulation test. This paper described a new method considering both the damage error and the runtime of the test on a multi-axial test rig. First, the fatigue editing technique is applied to cut the small load in road data to reduce the runtime initially. The edited road load data could be reproduced on a multi-axial test rig successfully. Second, the rainflow matrices of strains on different proving ground roads are established and transformed into damage matrices based on the S-N curve and Miner rules using a reduction method. A standard simulation test for vehicle reliability procedure is established according to the proving ground schedule as a target to be accelerated.
2017-03-28
Journal Article
2017-01-0237
Jonas Biteus, Tony Lindgren
Abstract Maintenance planning of trucks at Scania have previously been done using static cyclic plans with fixed sets of maintenance tasks, determined by mileage, calendar time, and some data driven physical models. Flexible maintenance have improved the maintenance program with the addition of general data driven expert rules and the ability to move sub-sets of maintenance tasks between maintenance occasions. Meanwhile, successful modelling with machine learning on big data, automatic planning using constraint programming, and route optimization are hinting on the ability to achieve even higher fleet utilization by further improvements of the flexible maintenance. The maintenance program have therefore been partitioned into its smallest parts and formulated as individual constraint rules. The overall goal is to maximize the utilization of a fleet, i.e. maximize the ability to perform transport assignments, with respect to maintenance.
2017-03-28
Journal Article
2017-01-0404
Anatoliy Dubrovskiy, Sergei Aliukov, Sergei Dubrovskiy, Alexander Alyukov
Abstract Currently, a group of scientists consisting of six doctors of technical sciences, professors of South Ural State University (Chelyabinsk, Russia) has completed a cycle of scientific research for creation of adaptive suspensions of vehicles. We have developed design solutions of the suspensions. These solutions allow us to adjust the performance of the suspensions directly during movement of a vehicle, depending on road conditions - either in automatic mode or in manual mode. We have developed, researched, designed, manufactured, and tested experimentally the following main components of the adaptive suspensions of vehicles: 1) blocked adaptive dampers and 2) elastic elements with nonlinear characteristic and with improved performance.
2017-01-10
Technical Paper
2017-26-0257
Mandar Bhatkhande, Rahul Mahajan, Amol Joshi
Abstract Front windscreen wiping test is legal requirement for all motor vehicles as per standards like IS15802:2008 [1], IS15804:2008 [2] in India. This test requires windscreen mock-up/actual vehicle to be tested along with all wiping mechanisms such that minimum percentage areas to be wiped should meet the requirements specified in the IS standard. From manufacturer’s perspective this involves investment of lot of time and cost to arrive at the final design solution in order to meet the wiping requirements. The work scope in this paper is limited to bus category of vehicles. The methodology presented in this paper would enable quick design solutions for bus body builders or manufacturers to meet the wiping requirements specified in IS standard. The methodology presented in this paper was developed to carry out windscreen wiping test through commercially available simulation software.
2017-01-10
Technical Paper
2017-26-0225
Yakov lobachevskii, Zahid Godzhaev, Vladimir Shevtsov, Alexandr Lavrov, Aleksandr Merzlyakov, Oleg Sizov
Abstract The present article addresses issues related to the development of a scientifically-based classification of agricultural tractors with consideration of problems associated with international harmonization of testing requirements and classification parameters; it describes the disadvantages of classification of tractors by maximum towing power achieved on a concrete surface, which is used abroad. The authors state the requirements for towing and power classification of agricultural tractors, which should act as a framework for energy harmonization of sets of tractors with sets of machines independently from developers and manufacturers; and demonstrate the need for harmonization of typical size classification series of towing and power parameters with series of preferred numbers recommended by International Organization for Standardization (ISO).
2017-01-10
Technical Paper
2017-26-0018
Douglas Eddy, Shreyas Patil, Sundar Krishnamurty, Ian Grosse, Chandrashekhar Thorbole
Abstract Prevention of passenger ejection from motor coach seats in the case of rollover and frontal crashes is critical for minimizing fatalities and injuries. This paper proposes a novel concept of affordably retrofitting 3-point seatbelts to protect passengers during these significant crash scenarios. Currently, the available options involve replacement of either the entire fleet, which takes time to avoid extremely high costs, or all seats with new seats that have seatbelts which is still expensive. Alternatively, this paper presents the development of an innovative product that can be installed in seat belt-ready bus structures at a fraction of the cost. The efficacy of the design is studied using finite element analysis (FEA) to meet Federal Motor Vehicle Safety Standards (FMVSS) 210 standards for conditions involved in frontal and side impacts.
2017-01-10
Technical Paper
2017-26-0145
Benjamin Rodriguez Sharpe, Oscar Delgado, Mehul Garg
Abstract This analysis is a comprehensive assessment of the fuel-saving technologies and technology packages for three representative diesel HDV types in India: a 40-tonne Gross Vehicle Weight (GVW) tractor-trailer, 25-tonne rigid truck, and a 16-tonne transit bus. These representative vehicle types are modeled after top-selling models in the Indian market based on sales data from fiscal year 2013-14. To model these vehicle types are accurately as possible, the study team acquired detailed engine maps that match the engine models in the respective vehicles and sought input on other vehicle systems from some of the leading Indian HDV manufacturers and suppliers. Using Autonomie as the vehicle simulation platform, the authors investigate the fuel consumption impacts of both individual technologies and combinations of technologies in the following areas: engine, transmission, driveline, aerodynamics, tires, material substitution (i.e., curb weight reduction), and hybridization.
2017-01-10
Journal Article
2017-26-0119
Ragupathi Soundara Rajan, Vijay Sharma, Ashraf Emran, Devising Rathod, John Henry Kwee, Thorsten Michaelis-Hauswaldt, Thomas Körfer
Abstract The emission legislations are becoming increasingly strict all over the world and India too has taken a big leap in this direction by signaling the migration from Bharat Stage 4 (BS 4) to BS 6 in the year 2020. This decision by the Indian government has provided the Indian automotive industry a new challenge to find the most optimal solution for this migration, with the existing BS 4 engines available in their portfolio. Indian market for the LCV segment is highly competitive and cost sensitive where the overall vehicle operation cost (vehicle cost + fluid consumption cost) is the most critical factor. The engine and after-treatment technology for BS 6 emission levels should consider the factors of minimizing the additional hardware cost as well as improving the fuel efficiency. Often both of which are inversely proportional. The presented study involves the optimization of after treatment component size, layout and various systems for NOx and PM reduction.
2016-10-25
Technical Paper
2016-36-0230
Guilherme Canuto da Silva, Paulo Carlos Kaminski
Abstract Automotive industries are undergoing a transformation of their manufacturing systems. Called by the German government as Industrie 4.0, this transformation is based on the evolution of traditional Embedded Systems-ES to Cyber-Physical Systems-CPS. In the next years such evolution will have to reach transitory stages, where ES and CPS should coexist for a determined period of time (ES-CPS). Based on this projection, this work compares ES with CPS, identifies the main differences between these systems and thus forms a transitory stage of automotive manufacturing for the next years. The work is structured as follows: Introduction section places the reader on the treated subject and presents the methodology of the work. Later, Industrie 4.0, Embedded Systems (ES) and Cyber-Physical systems (CPS) are defined. Once this is done, the analysis of ES-CPS transition is finished. Analysis results are presented and a representation of ES-CPS transition is proposed.
2016-10-25
Technical Paper
2016-36-0167
Fábio Coelho Barbosa
Abstract Emissions from motor vehicles have been a subject of concern in urban areas, as great amounts of population have been permanently exposed to large amounts of pollutants, with intrinsic adverse health effects. In this context, in the last two decades, stringent emissions standards have been developed to control the maximum emission limits of the so called regulated pollutants. This continuous reduction of emission targets has imposed a great effort to engine and vehicle manufacturer in the development of technological solutions for emission limits compliance, which can be done by reducing engine-out emissions through improvements in combustion process and fuel management system, as well as by using aftertreatment devices in the exhaust system.
2016-10-25
Technical Paper
2016-36-0171
Leandro Brasil Araujo, Juliano Tessaro, Renan Sardim
Abstract Due to financial global crisis started in 2008 and intensified in the past years in Brazil, the maintenance of a good company’s financial situation is a big challenge and it is more relevant in actual moment. Because of expected turbulent scenario for the next years, it is necessary to adopt strategies to mitigate risks that involve Supply Chain impacting industrial production. In this way, it is crucial adopt strategies and actions that assist to evaluate the performance of suppliers and its associate potential financial risk, what can be considered a companies’ success differential factor during crisis period as well. In this scenario, MWM Motores Diesel adopts an internal process of monitoring the risk of suppliers based on internally developed tools and others available at market.
2016-10-25
Technical Paper
2016-36-0177
Fábio Coelho Barbosa
Abstract Public transport has been considered the preferred strategy to reduce congestion and pollution from urban road traffic. For low to medium capacity, bus systems are considered the most affordable and flexible mode. Currently, diesel based systems still dominate transit bus market, due to their high productivity, low deployment costs, technological maturity, operational reliability and flexibility (high daily ranges, fast refuelling and no infrastructure requirement along the routes). However, although some important improvements in engine technology and aftertreatment devices, enforced by emission standards improvements (Euro VI, US 2010 and those related), have been achieved, it is well known that there is a limit to cleaning exhaust diesel buses exhaust. In this context, transit authorities and operators have been under pressure to shift for more environmental friendly technologies.
2016-09-27
Journal Article
2016-01-8007
Chris Mentzer, Ryan D. Lamm, Jerry Towler
Abstract Since the turn of the millennium, automated vehicle technology has matured at an exponential rate, evolving from research largely funded and motivated by military and agricultural needs to a near-production market focused on everyday driving on public roads. Research and development has been conducted by a variety of entities ranging from universities to automotive manufacturers to technology firms demonstrating capabilities in both highway and urban environments. While this technology continues to show promise, corner cases, or situations outside the average driving environment, have emerged highlighting scenarios that impede the realization of full automation anywhere, anytime. This paper will review several of these corner cases and research deficiencies that need to be addressed for automated driving systems to be broadly deployed and trusted.
2016-09-27
Technical Paper
2016-01-8032
Anatoliy Dubrovskiy, Sergei Aliukov, Andrei Keller, Sergei Dubrovskiy, Alexander Alyukov
Abstract In this paper we consider a new design of adaptive suspension systems of vehicles with better technical characteristics and functional abilities in comparison with existing designs. We have developed the following main suspension components of vehicles: a lockable adaptive shock absorber with a wide range of control performance, implementing "lockout" mode by means of blocking adaptive shock absorber, and an elastic element with progressive non-linear characteristic and automatic optimization of localization of work areas. Advantages of our developments in the vehicle suspensions are the following: 1) when the vehicle is in a wide range of speeds in a so-called "comfort zone", we have managed, by applying the non-linear elastic element, to reduce significantly the stiffness of the elastic suspension elements in compare with the regular structures - at least in two times.
2016-09-27
Technical Paper
2016-01-8087
Xia Meng
Abstract The output power of a turbocharged diesel engine will decrease and the maximum torque point in the full load torque map will move backwards when the engine is operating at plateau.
2016-09-27
Technical Paper
2016-01-8082
Kaushik Saha, Ahmed Abdul Moiz, Anita Ramirez, Sibendu Som, Munidhar Biruduganti, Michael Bima, Patrick Powell
Abstract The medium and heavy duty vehicle industry has fostered an increase in emissions research with the aim of reducing NOx while maintaining power output and thermal efficiency. This research describes a proof-of-concept numerical study conducted on a Caterpillar single-cylinder research engine. The target of the study is to reduce NOx by taking a unique approach to combustion air handling and utilizing enriched nitrogen and oxygen gas streams provided by Air Separation Membranes. A large set of test cases were initially carried out for closed-cycle situations to determine an appropriate set of operating conditions that are conducive for NOx reduction and gas diffusion properties. Several parameters - experimental and numerical, were considered. Experimental aspects, such as engine RPM, fuel injection pressure, start of injection, spray inclusion angle, and valve timings were considered for the parametric study.
2016-09-27
Technical Paper
2016-01-8078
He Changming, Xu Sichuan
Currently the downsizing of IC Engine has become the mainstream to meet fuel economy and emission regulations. It is required that higher power output while with lighter weight that is actually a daunting challenge for a common four-stroke IC engine, because it needs lots of new technologies and high manufacturing cost. For recent years the two-stroke opposed piston engine has drawn much attention in many developed countries for fundamental advantages itself. Double firing frequency means the increased power density brings about smaller engine size and lighter weight. However, the low scavenge efficiency has been assumed the main disadvantage for a two-stroke engine for a long period, and adverse to combustion efficiency. The uniflow scavenging process was investigated by the transient CFD simulation for multiple Cases. The influence of port timing and exhaust back pressure on scavenging was analyzed for two different intake port layouts.
2016-09-27
Technical Paper
2016-01-8074
Gaurav Kumar, Pavan Sindgikar, Narayan Jadhav, Sandip Gaidhane, Sarfaraj Shaikh
Abstract With the advent of most advanced diesel engines the demand for upgraded engine cooling modules capable of handling more heat rejection in a smaller space is surging. Moreover, the variance in the operating conditions, i.e., the simultaneous cooling demands for peak load as well as partial load in different ambient conditions of the vehicle operation, broadens the scope of development of a cooling system. Also, the cooling system needs to be configured judiciously so as to cater effective cooling at peak loads and efficient cooling at partial loads. This research paper deals with a cooling system developed using modularity approach in order to have a control over tuning of subsystems for varying operating conditions and also to achieve the performance targets with a compact design adhering to packaging constraints. Kuli simulation of different designed configurations were carried out for identification of best concept.
2016-09-27
Technical Paper
2016-01-8062
Jham Kunwar Tikoliya, Ram Krishna Kumar Singh, Ramesh Kumar, Suresh Kumar Kandreegula
Abstract The existing head cover is having external oil and blow by separation unit, which is not only costlier but also complex and leads to increase in overall height of engine which was difficult to integrate in new variants of vehicles. A new head cover has been designed with internal baffle type oil and blow by separation system to ensure efficient separation and proper packaging of the system in new variants. The new system has been finalized after 26 DOE’s of different wire mesh sizes and different baffle plate size and positions. The final system has two bowl shaped separation unit with wire mesh, two cup type oil separation passages and one baffle plate for separating blow by. The system works on condensation and gravity method. The blow by is guided through a well-defined passage integrated in aluminum cylinder head cover itself. The passage angle is maintained to ensure minimum oil flow with blow by.
2016-09-27
Journal Article
2016-01-8055
Rohit Saha, Long-Kung Hwang, Mahesh Madurai Kumar, Yunfeng Zhao, Chen Yu, Bob Ransijn
Abstract Wheel loader subsystems are multi-domain in nature, including controls, mechanisms, hydraulics, and thermal. This paper describes the process of developing a multi-domain simulation of a wheel loader. Working hydraulics, kinematics of the working tool, driveline, engine, and cooling system are modeled in LMS Imagine.Lab Amesim. Contacts between boom/bucket and bucket/ground are defined to constrain the movement of the bucket and boom. The wheel loader has four heat exchangers: charge air cooler, radiator, transmission oil cooler, and hydraulic oil cooler. Heat rejection from engine, energy losses from driveline, and hydraulic subsystem are inputs to the heat exchangers. 3D CFD modeling was done to calibrate airflows through heat exchangers in LMS Amesim. CFD modeling was done in ANSYS FLUENT® using a standard k - ε model with detailed fan and underhood geometry.
2016-09-27
Journal Article
2016-01-8118
QingHui Yuan
Emission, fuel economy and productivity in non-road mobile machinery (NRMM) depend largely on drive cycles. Understanding drive cycles can provide the in-depth information and knowledge that help the system integrator better optimize the vehicle management system. Some non-road engine test cycles already exist nowadays. However, these cycles are mainly for engine emission regulation purpose, and not closely tied to real world applications. Therefore, from both industries and academia, it has been the common practice to instrument and retrofit a vehicle, assign a professional driver operate the retrofitted vehicle for real testing, and compare the results to the baseline vehicle under the similar operating conditions. Obviously this approach is time consuming and resource intensive. In this paper, we attempt to address this issue by introducing a method of constructing standard drive cycles from in-field operation data.
2016-09-27
Technical Paper
2016-01-8128
Vladimir G. Shevtsov, Alexandr Lavrov, Zahid A. Godzhaev, Valentin M. Kryazhkov, Gennagy S. Gurulev
Abstract The objective of this study is to identify the most popular agricultural tractor models in Russia by their engine ratings and countries of origin. This review presents an analysis of changes in the composition of engine-ratings and sales volume of agricultural tractors in the Russian market between 2008 and 2014. Including knock-down kits, the countries of origin are Russia, the CIS-countries and non-CIS Countries. The variety of manufacturers, highlight the leading international companies which have supplied up to 200 units is discussed. The papers shows that CIS-manufactured tractors represent the greatest number in the market - up to 57 per cent, tractors from non-CIS countries occupy up to 12 per cent of the market, and the number of Russian models is quite limited - 3.0 per cent in 2012 and 3.4 per cent in 2014.
2016-09-27
Journal Article
2016-01-8106
Sameer Kolte, Ananth Kumar Srinivasan, Akilla Srikrishna
Abstract As we move towards the world of autonomous vehicles it becomes increasingly important to integrate several chassis control systems to provide the desired vehicle stability without mutual interference. The principles for integration proposed in existing technical literature are majorly centralized which are not only computationally expensive but does not fit the current supplier based OEM business model. An Automotive OEM brings multiple suppliers on-board for developing the Active Safety systems considering several factors such as cost, quality, time, ease of business etc. When these systems are put together in the vehicle they may interfere with each other’s function. Decoupling their function results in a need of heavy calibration causing performance trade-offs and loss in development time.
2016-04-05
Technical Paper
2016-01-0571
Guillaume Bernard, Mark Scaife, Amit Bhave, David Ooi, Julian Dizy
Abstract Internal combustion (IC) engines that meet Tier 4 Final emissions standards comprise of multiple engine operation and control parameters that are essential to achieve the low levels of NOx and soot emissions. Given the numerous degrees of freedom and the tight cost/time constraints related to the test bench, application of virtual engineering to IC engine development and emissions reduction programmes is increasingly gaining interest. In particular, system level simulations that account for multiple cycle simulations, incylinder turbulence, and chemical kinetics enable the analysis of combustion characteristics and emissions, i.e. beyond the conventional scope of focusing on engine performance only. Such a physico-chemical model can then be used to develop Electronic Control Unit in order to optimise the powertrain control strategy and/or the engine design parameters.
2016-04-05
Journal Article
2016-01-0961
Satish Narayanan Ramachandran, Gillis Hommen, Paul Mentink, Xander Seykens, Frank Willems, Frank Kupper
Abstract Heavy-duty diesel engines are used in a wide range of applications. For varying operating environments, the engine and aftertreatment system must comply with the real-world emission legislation limits. Simultaneously, minimal fuel consumption and good drivability are crucial for economic competitiveness and usability. Meeting these requirements takes substantial development and calibration effort, and complying with regulations results in a trade-off between emissions and fuel consumption. TNO's Integrated Emission Management (IEM) strategy finds online, the cost-optimal point in this trade-off and is able to deal with variations in operating conditions, while complying with legislation limits. Based on the actual state of the engine and aftertreatment system, an optimal engine operating point is computed using a model-based optimal-control algorithm.
Viewing 1 to 30 of 699