Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 622
2017-11-03
Magazine
Rockets re-engineered-a step further into the cosmos Powertrain design for reliability Ice breaker Mazda's Skyactiv-X beats the big companies to market with a promising new engine that marries Otto and Diesel attributes. Advances for off-highway engine design As manufacturers continue to drive out cost and meet a worldwide patchwork of regulatory frameworks, the tools for developing those engines are advancing. From showcase prototypes to advanced analytical techniques, suppliers are helping the cause. Aeroacoustic simulation delivers breakthroughs in aircraft noise reduction Autonomy testing: Simulation to the rescue Autonomous technology development injects new rigors on vehicle-development testing.
2017-08-03
Magazine
Collaborating on diesel emission control Stringent fuel-efficiency and criteria-pollutant standards call for new combustion strategies. The SwRI-led Advanced Combustion Catalyst and Aftertreatment Technologies consortium reinvents existing technologies and experiments with new catalysts to meet standards. More intelligence equals more efficiency, enhanced functionality Advanced systems require renewed focus on architectures, processors, sensors and networks. Appraising the potential for platooning in the U.S. Researchers from the National Renewable Energy Laboratory perform statistical analysis based on a large collection of real-world U.S. truck usage data to estimate the fraction of total miles that are technically suitable for platooning. Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will largely drive vehicle developments in the coming years, according to experts presenting at the revamped SAE COMVEC 17.
2017-07-27
Magazine
The Rapid Rise of Beryllium-Aluminum Alloys in Aerospace Aeroacoustic Simulation Delivers Breakthroughs in Aircraft Noise Reduction Using System Simulation to Manage Increasing Thermal Loads on Aircraft Fuel Systems Ensuring the Compliance of Avionics Software with DO-178C Microwave Photonic Notch Filter Helps Ensure Critical Mission Success Measuring Propellant Stress Relaxation Modulus Using Dynamic Mechanical Analyzer New testing technique requires less material, gives more accurate results. Combustion Characteristics of Hydrocarbon Droplets Induced by Photoignition of Aluminum Nanoparticles Test methodology allows analysis of combustion dynamics for subscale rocket injectors under super critical conditions. Vapor Pressure Data and Analysis for Selected Organophosphorous Compounds: DIBMP, DCMP, IMMP, IMPA, EMPA, and MPFA Determining the thermophysical properties of chemical warfare agent simulants can help evaluate the performance of defensive equipment.
2017-06-01
Magazine
Executive Viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Alternative power and connectivity top of mind Using power dense flywheel hybrid technology to cut fuel consumption of OH equipment IoT connections transform manufacturing, vehicle validation Annual Product Guide Supplier Directory Complete listing of industry suppliers categorized by technology area.
2017-05-05
Magazine
Alternative fuels and challenges Automotive powertrain development: virtually-connected hardware co-simulation Functional Safety-progressing towards safer mobility Electric rockets and the future of satellite propulsion Achates powers toward production A potential ICE game-changer, the Achates OP engine is being tooled up for production at one OEM while a new 2.7-L triple for light-truck demonstrations enters the build phase. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2017-04-06
Magazine
Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2017-03-01
Magazine
‘Not just a student club’ How the University of Toronto Aerospace team (UTAT) came to redefine the mission and structure of the design team. Success doesn’t come by chance In an SAE International technical paper, students at the University of Idaho identify best practices for their SAE Clean Snowmobile Challenge team. Winning formula Auburn University team hopes to carry forward the momentum of victory at the 2016 Formula SAE Lincoln competition into 2017.
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2016-11-01
Magazine
The comeback car The Cal Poly Pomona FSAE Team implements several measures to help overcome setbacks and achieve a podium finish at Formula SAE Lincoln. Going deep The uBox concept car developed as part of Clemson's Deep Orange program features a uniquely formed roof part. Creating a monster North Dakota State University SAE Clean Snowmobile Challenge team brings to life a war-torn engine pieced together with parts from another.
2016-08-16
Magazine
Types of aircraft passenger-escape systems An overview of existing and potential new methods for assuring aircraft occupant safety. SAE Skill India Initiative: S2I2 A new SAEINDIA collaboration aims to help young engineers acquire "industry-ready" skills. A technology-driven sustainable-agriculture solution Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Rotorcraft icing computational tool development 3D printing machines can't be built fast enough In the additive-manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-08-05
Magazine
Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-05-17
Magazine
Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.
2016-05-02
Magazine
UAV Technology Using SWaP-C Reductions to Improve UAS/UGV Mission Capabilities UGV Technology Designing Rugged Computing Platforms for UGVs UUV & Robotics Technology Bi-manual Dexterous Manipulation for Maritime Explosive Ordnance Disposal UUV Technology Applying UUV Advances to Safeguard Harbors and Littoral Waters Robotics Technology Designing a Robot to Counter Vehicle-Borne Improvised Explosive Devices
2016-04-01
Magazine
CMU goes full futuristic A student team from Carnegie Mellon University offers its take on a proposed new mode of transportation involving tubes and pods. Three CDS teams win MOMENTUM design awards Teams from British Columbia Institute of Technology, University of Idaho and Pakistan Navy Engineering College win competition for best description of an innovation for their 2016 SAE Collegiate Design Series vehicle entry. These pro tips can earn your CDS team point Members of SAE International's Collegiate Design Series staff offer 10 tips to help teams fully realize their potential at competition.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2016-02-01
Magazine
Stanford goes solar down under Team takes sixth place in Bridgestone World Solar Challenge to cap a rigorous two-year design and development program. Taking the lead Being in charge of an SAE Student Chapter entails everything from organizing meetings to issuing 'nastygrams.' A winning video from a winning Collegiate Design Series team The defending champion of the Formula SAE Michigan competition, Oregon State University, has found another way to win. SAE U.K. Section co-hosts lecture series 'starring' NASA engineer/expert Dr. Ravi Margasahayam of NASA is the engineer responsible for ensuring payload safety for the Space Shuttle and the International Space Station.
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
2015-06-03
Magazine
Executive Viewpoints Off-highway industry executives from companies such as BorgWarner, Perkins, Cummins, and Danfoss reflect upon challenges inside, and outside, the industry, and what technologies, innovations, and strategies will need to be implemented to thrive into the long-term future. 16th Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2015-05-01
Magazine
Unmanned Aerial Systems Deploying Next-Generation UAS Platforms with 3U VPX Unmanned Ground Vehicles UGVs - On the Cutting Edge of Thermal Management Unmanned Surface/Underwater Vehicles Controlling the Seas - Introducing a New Concept in Autonomous Surface/Underwater Vehicles Robotics Connectivity in Robotic Systems
2014-05-08
Magazine
Executive Viewpoints Off-highway industry executives write about some of the challenges and trends facing the industry over the next 20 years, and the innovation that will be required to stay competitive and sustainable. Annual product guide A product roundup showcasing the newest and most innovative supplier technologies in a variety of areas such as Powertrain & Energy, Electronics, Hydraulics, Materials, Testing & Simulation, Body and Chassis, and Interiors.
2014-05-01
Magazine
Simulating lightweight vehicles operating on discrete terrain Researchers characterize the mobility of autonomous reconnaissance vehicles on terrain considered to be deformable, and represented as a collection of bodies of spherical shape.
2014-03-04
Magazine
What's New at ConExpo/IFPE More new products and technologies that companies plan to showcase at this year's ConExpo-Con/Agg, which is co-located with the IFPE fluid-power event in Las Vegas from March 4-8, are previewed. Gearshift actuator dynamics in a dual clutch transmission The emergence of tougher environmental and fuel efficient legislations have triggered exploration and advance toward new and better vehicle transmission technologies. Software makes solid impact Programs are helping hydraulic systems do more while reducing operator workloads. Damping out booming noise NVH improvement techniques are gaining traction with the goal to improve the quality perception of off-highway equipment performance and operator comfort.
2014-02-18
Magazine
Synergistic opportunities abound The horizontal deployment of technologies and knowledge evident in mass-market personal mobility needs to be scaled up in magnitude and performance for commercial vehicles. Q&A with Dr. V Sumantran The Hinduja Group's Executive Vice Chairman talks about his company's award-winning vehicle and related commercial-vehicle topics. The future of electric and hybrid vehicles in India Technical and political challenges alike have held back the electric and hybrid market, but there are signs of hope.
2014-02-06
Magazine
What's New at ConExpo/IFPE A preview of some of the new products and technologies that companies plan to showcase at this year's ConExpo-Con/Agg, which is co-located with the IFPE fluid-power event in Las Vegas from March 4-8. Injection strategies for improving emissions characteristics Premixed charge compression ignition reduces NOx and soot emissions, but requires the optimization of the injection timing and pressure, fuel mass in pilot injection, and EG R rate. Systems that talk together, are efficient together Design teams take a holistic view, linking engines, transmissions, hydraulics, and aftertreatment systems to boost efficiency and performance. Managing the deluge of data The model-based development (MBD) process has been a key enabler of technical advancement in the transportation industry; however, the MBD process leads to the generation of large volumes of data artifacts and work products.
2013-12-12
Magazine
Achieving efficiency via virtual validation Model-based design and V-Cycle-based development processes address the need for managing complexity, and to some extent, efficiency in product development.
2013-11-25
Magazine
Q&A with Dr. Pawan Goenka The Executive Director & President-- Automotive & Farm Equipment Sectors, Mahindra & Mahindra Ltd. answers questions on a range of subjects such as auto fuel efficiency, emissions, alternative fuels, safety, telematics, manufacturing, and sustainability. Advances in surface engineering Newer materials with improved properties can enhance the properties of the working surfaces of cylinder components for the demands of increased temperatures, pressures, and corrosive atmospheres and still satisfy performance and life requirements. E-mobility opportunities in the Indian ecosphere The Prime Minister of India in January 2013 unveiled the National Mission on Electric Mobility and formed a National Board of Electric Mobility to fast track e-mobility for India through industry-government partnerships.
2013-09-03
Magazine
Honda flexes new powertrain muscle Honda R&D's top engineer outlines his company's Earth Dreams powertrain assault that includes more efficient, robust, and refined ICEs; new hybrid drive systems; and further developments in FCEVs, HCCI, plasma ignitions, and Rankine-cycle engine types. Setting Hyundai's fuel cell strategy Hyundai is one of two major OEMs that are still going it alone in developing FCEV technology, rather than collaborating with competitors. The company's head of fuel cell R&D explains the path toward 2015 series production. Volvo Trucks makes a case for DME The truck maker is working with Oberon Fuels and others to bring dimethyl ether-what company execs say is one of the most promising sustainable alternative fuels-to North America in 2015. Sensing a need for creature comforts Automakers and suppliers are turning to new sensors to help make cabins more comfortable and safer while automating some tasks.
Viewing 1 to 30 of 622

Filter

  • Magazine
    622