Criteria

Text:
Content:
Display:

Results

Viewing 31 to 60 of 195
2014-10-20
Book
Kirsten M. Koepsel
Electronic parts are used throughout industry to run everyday products, such as cell phones, and also highly technical products, such as aircraft, missiles, and spacecraft. Unlike cell phones, which are often replaced every year, the highly technical products may remain in service from 20 to more than 80 years. But what happens if the original electronic part, with a life cycle of 18 months, is no longer available? Some manufacturers have discovered that they have unwittingly purchased counterfeit ones. Counterfeit Electronic Parts and Their Impact on Supply Chains examines how these items are negatively affecting the aviation, spacecraft, and defense sectors and what can be done about it.
2014-10-01
Book
Honda's October 2014 R&D Technical Review features cutting-edge developments from Honda's worldwide R&D teams. This edition brings 32 original papers. They cover advancements in the following areas: • Development of HF120 turbofan engine • Development of High-access survey robot for TEPCO's Fukushima Daiichi Nuclear Power Station • Advanced ignition control technology for HCCI Combustion • Identification of brake-drag mechanism in coasting-down mode and proposal of brake-drag stabilization and reduction methods
2014-10-01
Book
Mark Somerville, Goldberg E. David
This book tells the improbable stories of Franklin W. Olin College of Engineering and the iFoundry incubator at the University of Illinois. That either one survived is story enough, but what they found out together changes the course of education transformation forever: • How trust is key to unleashing young, courageous engineers. • How engineers need to move from a narrow technical education to one that actively engages six minds. • How emotion and culture-not content, curriculum & pedagogy-are the crucial elements of change. • How all stakeholders can collaborate to disrupt the status quo. A Whole New Engineer is a book that seriously looks at the coming revolution in engineering.
2014-10-01
Book
Virgil Ewson
LEDs are now acknowledged as the mainstream standard light source of what might reasonably be called ‘the future already in progress’. Their small size, powerful light emission, extreme reliability, low energy requirement and long lifespan mean that LEDs continue to make quick inroads in automotive sectors governed by cost and performance demands alike. Indeed, since the last edition of this report was published in 2010, the sector has continued to witness a blistering rate of innovation, and LEDs have now broken every automotive application barrier. Nevertheless, there are other light source technologies that have sprung from LED research and development, and some are poised to supplement – or even, in certain applications, supplant them.
2014-10-01
Book
Peter Harrop, Raghu Das
This master report summarizing and forecasting every sector of the EV industry remains unique. It adds new sectors as they become substantial, the latest being car-like micro-EVs homologated as quadricycles in Europe. Many profitable niches are emerging just as the largest major sectors are changing in importance; the industrial and commercial sector is now bigger and much more profitable than e-cars, and is set to remain so for at least eight more years. All components are changing with supercapacitors sometimes replacing or partly replacing batteries and also new types of battery, energy harvesting, power electronics and structure powering growth. Disruptive change is now the norm and the fruits of all this are truly spectacular; including such things as the Marian fast- surface boat that acts as a submarine when necessary, the fixed-wing plane that will stay aloft for five years on sunshine and the flying jet ski.
2014-07-01
Book
Dr. Michael J Provost
EVERYTHING WORKS WONDERFULLY is a 250-page A4 softback book written to provide a structured source of guidance and reference information on Servitization and the management of physical assets for people at all levels in industry: • Senior executives considering the expansion of their businesses into the provision of Asset Management services for the products they design and manufacture; • Middle management wishing to know what needs to be done to look after the assets they are responsible for and who to approach for help; • ‘Hands-on’ engineers looking for contacts and advice on detailed tools and techniques. • Academics may also find the book useful as a source of contacts and ideas for research.
2014-05-01
Book
David Saddington
The increasingly stringent emissions regulations faced by vehicle manufacturers have been driving the growth of more fuel-efficient conventionally powered vehicles. The ability of stop-start systems to improve vehicle carbon emissions by between 5% and 15% at very low additional cost has seen a dramatic increase in the proportion of vehicles being fitted with such systems. And this growth in demand for stop-start systems is set to increase substantially, especially in Europe, North America, China and Japan. The exclusive new report from ABOUT Automotive reviews the key market drivers for stop-start engine technology for the ‘micro hybrid’ segment and conventional internal combustion engine (ICE) vehicle applications. It sets out the market drivers and forecasts for the global stop-start systems market through to 2020 and reviews the technical advances made in stop-start technology, including the competing technologies, and the latest developments.
2014-03-11
Book
Timothy George Thoppil
Unwinding Electric Motors: Strategic Perspectives and Insights for Automotive Powertrain Applications provides an in-depth assessment of the most important technology, manufacturing, and supply chain aspects of the fast-paced world of electric motors. A joint effort that brings together the technology and product strategy experience of the P3 Group and the focused reach of SAE International, Unwinding Electric Motors: Strategic Perspectives and Insights for Automotive Powertrain Applications lends clarity combined with solid data to those interested in understanding the fundamental factors shaping this industry in the next five years. Authored by Timothy G. Thoppil, from the P3 Group, this market study draws on extensive industry experience and is supported by surveys and interviews with industry professionals from OEMs, Tier 1 suppliers, research institutions, and universities.
2014-02-24
Book
Jorge Segers
Racecar data acquisition used to be limited to well-funded teams in high-profile championships. Today, the cost of electronics has decreased dramatically, making them available to everyone. But the cost of any data acquisition system is a waste of money if the recorded data is not interpreted correctly. This book, updated from the best-selling 2008 edition, contains techniques for analyzing data recorded by any vehicle's data acquisition system. It details how to measure the performance of the vehicle and driver, what can be learned from it, and how this information can be used to advantage next time the vehicle hits the track. Such information is invaluable to racing engineers and managers, race teams, and racing data analysts in all motorsports. Whether measuring the performance of a Formula One racecar or that of a road-legal street car on the local drag strip, the dynamics of vehicles and their drivers remain the same. Identical analysis techniques apply.
2014-01-21
Book
With 14 new definitions touching on management, healthcare, startups, manufacturing, and service, the 5th edition of the Lean Lexicon, is the most comprehensive edition yet of the handy and practical glossary for lean thinkers. The latest Lexicon, updated in 2014, contains 60+ graphics and 207 terms from A3 Report to Yokoten. The Lexicon covers such key lean terms as andon, jidoka, kaizen, lean consumption, lean logistics, pull, plan-for- every-part, standardized work, takt time, value-stream mapping, and many more. The new terms are: • Basic Stability • Coaching • Gemba Walk • Huddle • Kamishibai Board • Kata • Leader Standard Work • Lean Management • Lean Management Accounting • Lean Startup • Problem Solving • Service Level Agreement • Training Within Industry (TWI) • Value-stream Improvement
2014-01-03
Book
Anders Parment
The car - once everybody's dream and a key status symbol in most countries and cultures - has been extensively questioned in the last decades and in the last few years particularly. Urbanization, traffic congestion, pollution problems, heavy reliance on scarce oil supplies, safety issues and ever-growing competition, have all provided significant business challenges for the automotive industry. Many car manufacturers have had to fundamentally rethink their design, brand and marketing strategies to thrive in a savvy, consumer-led culture, and markets that are becoming increasingly restrictive in size and opportunity.
2014-01-01
Book
Les Brown
The years following the Second World War saw Britain in the grip of shortages, rationing and recession. For those wanting a high-performance car there was little choice - either buy a pre-war model, or build your own. This led to the conversion of the most unlikely vehicles into genuine sports cars, and a whole industry grew up using the newly-developed fiberglass material to facilitate conversions. Operating from a tiny back-street woolen mill, Rochdale Motor Panels became a market leader, and made it possible to construct genuine 100mph+ vehicles at a fraction of market prices. The late 1950s were a boom time, and by 1960 Rochdale was ready for a huge leap forward. The exquisite Lotus Elite had proved it was possible to use the material for structural purposes: Rochdale cleverly avoided all the problems faced by that vehicle in their breathtakingly simple Olympic design.
2014-01-01
Book
Petr Skobelev, George Rzevski
Managing Complexity is the first book that clearly defines the concept of Complexity, explains how Complexity can be measured and tuned, and describes the seven key features of Complex Systems: 1. Connectivity 2. Autonomy 3. Emergency 4. Non-equilibrium 5. Non-linearity 6. Self-organisation 7. Co-evolution The thesis of the book is that complexity of the environment in which we work and live offers new opportunities and that the best strategy for surviving and prospering under conditions of complexity is to develop adaptability to perpetually changing conditions. An effective method for designing adaptability into business processes using multi-agent technology is presented and illustrated by several extensive examples, including adaptive, real-time scheduling of taxis, see-going tankers, road transport, supply chains, railway trains, production processes and swarms of small space satellites.
2013-11-04
Book
Michel Biron
This book bridges the technology and business aspects of thermosets, providing a practical guide designed for engineers working in real-world industrial settings. The author explores the criteria for material selection, provides information on material properties for each family of thermosets, and discusses the various processing options for each material type. He explains advantages and disadvantages of using thermosets and composites in comparison to competing materials and assesses cost aspects, enabling the reader to balance out technical and economic constraints when choosing a thermoset and processing technology for a given application. This second edition contains a new section on composites solutions for practical problems, gathering information on trends contributing to the breakthrough of composites in various sectors.
2013-11-01
Book
Ian K. Jennions
Although the concept of Integrated Vehicle Health Management (IVHM) can be complex in its implementation, it is essentially based upon a simple idea: the more you know about a particular machine’s ability to function, the quicker you can act to prevent malfunctioning. This rapidly developing area of engineering seeks to enable better management of both the vehicle and vehicle fleet health. Use of IVHM can improve vehicle reliability, safety, and reduce unnecessary, unscheduled maintenance through the use of diagnostic and prognosis systems that monitor data and overall vehicle health. From an initial idea by the SAE IVHM Steering Group, these books have been collaboratively written by experts from academia, research and industry, and represent the collective voice of the most qualified authorities in the field.
2013-10-07
Book
Each year car manufacturers release new production models that are unique and innovative. The production model is the result of a lengthy process of testing aerodynamics, safety, engine components, and vehicle styling. The new technologies introduced in these vehicles reflect changing standards as well as trends of the market. From Acura to Volvo, this book provides a snapshot of the key engineering concepts and trends of the passenger vehicle industry over the course of a year. For each of the 43 new production models, articles from Automotive Engineering International (AEI) magazine detail technology developments as well as a comprehensive look at the 2013 passenger car models. This book provides those with an interest in new vehicles with all the information on the key automotive engineering and technology advancements of the year.
2013-10-01
Book
Honda's October 2013 R&D Technical Review features cutting-edge developments from Honda's worldwide R&D teams. This edition brings 23 original papers on the introduction of new technologies, spanning automobile, motorcycle, power products, and aircraft engines, to mention the most meaningful. This title covers the main following topics: • Development of Sport Hybrid i-MMMD control system for the 2014 Accord • Development of robotic lawnmower Miimo • Research on combustion improvement techniques by intake valve offset and squish effect • Identification of mechanism of transmission of flow-induced noise through glass for vehicle interior noise reduction • Design appearance evaluation tool for non-prototype development • Flat belt test system for suspension and tire measurement
2013-09-01
Book
David Saddington
Brand new research on the automotive HVAC sector This report highlights the findings of research conducted throughout 2013 by ABOUT Automotive in the automotive air conditioning market. Now in its 5th edition, it presents updates and extends the previous sector analysis, providing valuable insights in a number of areas, including: • The market for automotive climate control, determining the trends and topical issues; • The main manufacturers serving this sector, identifying how the market is divided in terms of market share and market value on a regional basis; • Trends in key product and process technologies, both current and future; and • OEM trends and rationale in adopting different types of climate control. The report provides answers to such vital questions as: • What are the market shares of the leading companies, and what will the automotive HVAC market be worth by 2020?
2013-04-01
Book
Bernhard Rieger
At the Berlin Auto Show in 1938, Adolf Hitler presented the prototype for a small, oddly shaped, inexpensive family car that all good Aryans could enjoy. Decades later, that automobile—the Volkswagen Beetle—was one of the most beloved in the world. Bernhard Rieger examines culture and technology, politics and economics, and industrial design and advertising genius to reveal how a car commissioned by Hitler and designed by Ferdinand Porsche became an exceptional global commodity on a par with Coca-Cola. Beyond its quality and low cost, the Beetle’s success hinged on its uncanny ability to capture the imaginations of people across nations and cultures. In West Germany, it came to stand for the postwar “economic miracle” and helped propel Europe into the age of mass motorization. In the United States, it was embraced in the suburbs, and then prized by the hippie counterculture as an antidote to suburban conformity.
2013-01-01
Book
Gary L. Casey PE
Have you ever thought that the design, development and manufacturing process was overburdened with irrelevant procedures and at the same time missing important features? If so, Commonsense Engineering: Simple, Effective Practices for Engineering and Quality Control is the title you have been looking for! It summarizes the 45 years of experience of the author, Gary Casey, PE, during which he has come to just those conclusions. According to Casey, what is missing is a good dose of common sense, and this book gives a number of examples of how to use common sense in the product development and manufacturing processes. It isn’t all inclusive, but instead is intended to spark the imagination of the reader so he/she, too, can apply common-sense principles to engineering, manufacturing and quality processes in his or her own career.
2013-01-01
Book
Randy Frank
Now in its third edition, Understanding Smart Sensors is the most complete, up-to-date, and authoritative summary of the latest applications and developments impacting smart sensors in a single volume. This thoroughly expanded and revised edition of an Artech bestseller contains a wealth of new material, including critical coverage of sensor fusion and energy harvesting, the latest details on wireless technology, the role and challenges involved with sensor apps and cloud sensing, greater emphasis on applications throughout the book, and dozens of figures and examples of current technologies from over 50 companies. This edition provides you with knowledge regarding a broad spectrum of possibilities for technology advancements based on current industry, university and national laboratories R & D efforts in smart sensors. Updated material also identifies the need for trusted sensing, the efforts of many organizations that impact smart sensing, and more.
2013-01-01
Book
Michael Plemmons
Writing in 1901, the futurist H. G. Wells predicted not only the decline of railways but the rise of the “motor truck” – a term unfamiliar to most readers at that time. Wells foresaw “large carrier companies” with fleets of horseless vehicles “to carry goods in bulk or parcels.” At the turn of the 20th century, colossal railroad companies ruled long-distance “land locomotion.” And the prospect of commercial life without draft horses seemed about as likely as Martians invading Earth – a story Wells had published four years earlier. But only one year later, ironically in a horse barn near a Chicago tannery, an ex-bicycle maker named Magnus Hendrickson began assembling Wells’ vision. This would become a decades-long undertaking to divine, design, build, continuously improve and ultimately perfect what makes a truck a truck – not simply a bigger car. Along the way, Magnus and his sons founded The Hendrickson Motor Truck Company, which in 2013 celebrated 100 continuous years of operations.
2012-11-12
Book
Ian K. Jennions
Following the best seller, Integrated Vehicle Health Management: Perspectives on an Emerging Field, the new title Integrated Vehicle Health Management: The Business Case Theory and Practice takes the subject to the next level. This time it addresses the commercial justification for the adoption of a new modus operandi in asset health management, and its impact on business strategy and servitization of technology. Edited by Dr. Ian Jennions, Director of the IVHM Center at Cranfield University in the U.K., the book tackles the most important questions on the transformation of business from selling a product, and deriving future income from spare part sales, to selling a service in which income is received in return for effective maintenance of the asset. The resulting service business requires a much deeper understanding of how the product is used and should be maintained, thus providing the rationale for Integrated Vehicle Health Management- IVHM.
2012-11-01
Book
Harold M. Cobb
The Dictionary of Metals is the authoritative reference work for terms and definitions of metals and terms relating to metals. It also includes a considerable amount of history starting with the seven metals of antiquity. Each of the metallic elements has a discussion that includes the discoverer and date, the naming of the metal and its meaning, the major applications, the significance of the discovery, and physical properties. Includes a timeline of important events in the history of metals and metallurgy.
2012-11-01
Book
David Saddington
In this second edition the key market drivers for petrol, diesel and hybrid engine trends are reviewed, to extend and update the analysis originally published in 2008, and re-evaluate the trends in the intervening four years. It provides an authoritative overview of both the technology issues (both present and future), and regulatory (emissions) concerns involved with this sector. Drivers and forecasts for global engine trends through to 2020 are identified, and data is provided by region for petrol, diesel and Hybrid/EV engine production. The research also highlights consumer trends in engine buying, explaining how the three main developed-market areas have evolved remarkably different consumer preferences.
2012-10-09
Book
Anant Sahay
Aircraft maintenance, repair and overhaul (MRO) requires unique information technology to meet the challenges set by today’s aviation industry. How do IT services relate to aircraft MRO, and how may IT be leveraged in the future? Leveraging Information Technology for Optimal Aircraft Maintenance, Repair and Overhaul (MRO) responds to these questions, and describes the background of current trends in the industry, where airlines are tending to retain aircraft longer on the one hand, and rapidly introducing new genres of aircraft such as the A380 and B787, on the other. This book provides industry professionals and students of aviation MRO with the necessary principles, approaches and tools to respond effectively and efficiently to the constant development of new technologies, both in general and within the aviation MRO profession.
2012-10-01
Book
Honda's latest technical review features cutting-edge developments from Honda's worldwide R&D team. The October 2012 volume begins with the introduction of new technologies and includes 7 of the company's best technical papers, covering advancements in fuel cell systems, aerodynamic design system development, power products, and other fundamental technologies. Chapters include: • Styling Design of New Accord, CR-V and NC700 Series • Development of NC700 Series, NSF250R Road Racer, BF250 Motor • Development of CVT for Midsize Vehicle • Development of New Manual Transmission for Middle-Torque Engine • Development of Rare Earth-saving Magnet Using Localized Diffusion Method • Development of Anti-allergenic Compound for Durability of Automotive Seat Fabric • Verification Test of High Differential Pressure Water Electrolysis-type Solar Hydrogen Station (SHS2)
2012-07-13
Book
Colin H. Simmons, Dennis E. Maguire, Neil Phelps
Now in its 4th edition, Manual of Engineering Drawing is a long-established guide for practicing and student engineers to producing engineering drawings and annotated 3D models that comply with the latest BSI and ISO standards of technical product specifications and documentation. This new edition has been updated in line with recent standard revisions and amendments, including the requirements of BS8888 2011 and related ISO standards. Ideal for international use, it includes a guide to the fundamental differences between the relevant ISO and ASME standards, as well as new information on legal aspects such as patents and copyright and end-of-life design considerations. Equally applicable to CAD and manual drawing, the book includes the latest developments in 3D annotation and the specification of surface texture.
2012-07-11
Book
Volume 1 of this six-volume compendium contains guidelines for determining the properties of polymer matrix composite material systems and their constituents, as well as the properties of generic structural elements, including test planning, test matrices, sampling, conditioning, test procedure selection, data reporting, data reduction, statistical analysis, and other related topics. Special attention is given to the statistical treatment and analysis of data. Volume 1 contains guidelines for general development of material characterization data as well as specific requirements for publication of material data in CMH-17. The Composite Materials Handbook, referred to by industry groups as CMH-17, is a six-volume engineering reference tool that contains over 1,000 records of the latest test data for polymer matrix, metal matrix, ceramic matrix, and structural sandwich composites.
Viewing 31 to 60 of 195