Criteria

Text:
Content:
Display:

Results

Viewing 211 to 240 of 2404
2015-12-21
WIP Standard
ARP6898
The goal of this new document is to provide criteria for managing, auditing, and controlling the use of rotating balancing tooling and associated support tools. A variety of subjects will be addressed including serialization and marking requirements, critical inspection criteria, performance tracking through tooling compensation trend analysis, handling of gage standards (rotor simulators, master blades, dummy blades, etc.), recommendations for periodic and preventive maintenance intervals, test recommendations to evaluate rotating tooling performance, requirements for traceable measures (such as torques, runouts, eccentricity, etc.), repeatability characterization, and criteria for return to service.
HISTORICAL
2015-12-17
Standard
ARP6852
This document describes methods that are known to have been used by aircraft manufacturers to evaluate aircraft aerodynamic performance and handling effects following application of aircraft ground deicing/anti-icing fluids (“fluids”), as well as methods under development. Guidance and insight based upon those experiences are provided, including: Similarity Analyses Icing Wind Tunnel Tests Flight Tests Computational Fluid Dynamics and other Numerical Analyses This document also describes: The history of evaluation of the aerodynamic effects of fluids The effects of fluids on aircraft aerodynamics The testing for aerodynamic acceptability of fluids for SAE and regulatory qualification performed in accordance with AS5900 NOTE: This document is applicable for fluids that are “qualified” to (i.e., have passed) the tests and other standards prescribed in AMS1424 or AMS1428 and are properly used in accordance with ARP4737.
2015-12-09
WIP Standard
AS6372
This standard shall apply to all commercial human suborbital spaceflights governed by the Commercial Space Launch Amendments Act of 2004.
CURRENT
2015-12-06
Standard
ARP6338
This document is intended for use by designers, reliability engineers, and others associated with the design, production, and support of electronic sub-assemblies, assemblies, and equipment used in ADHP applications to conduct lifetime assessments of microcircuits with the potential for early wearout; and to implement mitigations when required; and by the users of the ADHP equipment to assess those designs and mitigations. This document focuses on the LLM wearout assessment process. It acknowledges that the ADHP system design process also includes related risk mitigation and management; however, this document includes only high-level reference and discussion of those topics, in order to show their relationship to the LLM assessment process.
2015-12-01
WIP Standard
AIR6364
The paper will discuss in general terms the activities required to be undertaken or demonstrated during the establishment of the facility
2015-11-05
WIP Standard
AIR6355
This SAE Aerospace Information Report (AIR) has been written for individuals associated with ground level testing of turbofan and turbojet engines and particularly for those who might be interested in investigating the performance characteristics of a new test cell design or of proposed modifications to an existing test cell by means of numerical modeling and simulation.
CURRENT
2015-11-05
Standard
J1939/75_201511
SAE J1939-75 Generator Sets and Industrial Applications defines the set of data parameters (SPNs) and messages (PGNs) for information predominantly associated with monitoring and control generators and driven equipment in electric power generation and industrial applications. The data parameters (SPNs) and messages (PGNs) previously published within this document are now published in SAE J1939DA. Applications using the SAE J1939-75 document may need to reference SAE J1939DA for the SAE J1939 parameters and messages for monitoring and controlling the power units, e.g., engines and turbines, that power the generators and driven industrial equipment.
2015-10-23
WIP Standard
AS6896
Definition of target design and location on aircraft, that will be used: - To provide correct GSE alignment support and docking when approaching the aircraft in automatic, semi-automatic or manual mode - by GSE autoleveling system to detect and follow aircraft vertical movements
CURRENT
2015-10-23
Standard
AIR9968B
This SAE AIR provides a description of a reference method for viscosity tests of thickened (AMS 1428) anti-icing fluids.
2015-10-22
WIP Standard
AS6286/3
This document covers the standards for qualifying staff, different aspects of de-icing/anti-icing fluids. In conjunction with the main document and other related slash sheets it will provide guidelines for the proper procedures to deice and anti-ice aircraft on the ground information to support this training program is provided to make the material a better tool for the preparation and execution of the training & qualification. It is intended to provide a common basis for de-icing/anti-icing training and qualification for de- icing providers and airlines. This material was compiled using various international documents with support from SAE documents and individually contributed editorial comments. Its purpose is to serve as a “Globalized Deicing Training Manual”.
2015-10-21
WIP Standard
ARP1804B
This SAE Aerospace Recommended Practice (ARP) outlines the design and performance requirements for a battery-powered electric tow tractor for the handling of baggage or cargo trailers in airline service. The use of "shall " in this document indicates a mandatory requirement. The use of "should " indicates a recommendation or that which is advised but not required.
2015-10-21
WIP Standard
GEIASTD0007C
This standard defines logistics product data generated during the requirements definition and design of an industry or government system, end item or product. It makes use of the Extensible Markup Language (XML) through the use of entities and attributes that comprise logistics product data and their definitions. The standard is designed to provide users with a standard set of data tags for all or portions of logistics product data and customer defined sub-sets of logistics product data. The standard can be applied to any indsutry or government product, system or equipment acquisition program, major modification program, and applicable research and development projects. This standard is for use by both industry and government activities. As used in this standard, the requiring authority is generally the customer and the customer can be a government or industry activity. The performing activity may be either a industry or government activity.
2015-10-21
WIP Standard
GEIAHB0007C
This handbook is intended to provide additional information on the use and tailoring of the data in GEIA-STD-0007. The standard provides a new approach to Logistics Support Analysis Record (LSAR) (i.e., MIL-STD-1388-2B) data with emphasis on data transfer (e.g., XML Schemas) versus data storage (e.g., relational tables). GEIA-STD-0007 identifies the range of logistics product data that is generated during the development and acquisition of a system or end item. It does not prescribe the supportability analyses required to generate logistics product data. How the data is generated via analysis techniques/tools, how it is stored and processed, and how the data is used to generate specific logistics support products, is left to the performing activity. GEIA-STD-0007 is a data transfer standard implementing the logistics data concepts of GEIA-STD-927, Common Data Schema for Complex Systems.
2015-10-20
WIP Standard
ARP5741A
This Aerospace Recommended Practice (ARP) defines a series of test procedures to determine the temperature conditioning performance of air mode containers with active conditioning systems, a classification system for air mode containers with active condition systems, a standard means of expressing conditioning performance within each classification and a standard means of documenting test results.
2015-10-19
WIP Standard
AS6350
Recent Salt-Fog environmental qualification testing in accordance with RTCA/DO-160G, Paragraph 14, Category S identified both discrepancies in the performance specification documents and potential in-service corrosion problems with the charging valve. A new SAE AS for Valve; Aircraft, Pneumatic, High-Pressure Charging is necessary to resolve these items.
2015-10-16
WIP Standard
AS6347
This document applies to the development of Plans for integrating and managing electronic materials and processes in equipment for the military and commercial aerospace markets; as well as other ADHP markets that wish to use this document.
2015-10-14
WIP Standard
ARP4754B
This document discusses the development of aircraft systems taking into account the overall aircraft operating environment and functions. This includes validation of requirements and verification of the design implementation for certification and product assurance. It provides practices for showing compliance with the regulations and serves to assist a company in developing and meeting its own internal standards by considering the guidelines herein.
2015-10-13
WIP Standard
GEIASTD0008A
This Standard specifies the minimum derating requirements for using electronic components in moderately severe environments. These environments are assumed to include Airborne Inhabited Cargo (AIC), Airborne Inhabited Fighter (AIF), Ground Mobile (GM), and Naval Sheltered (NS) environments specified in MIL-HDBK-217. This Standard is intended to supersede the derating limits contained in Defense Standardization Program Office (DSPO) Standardization Directive SD-18, Naval Standard TE000-AB-GTP-010, and Air Force ESD-TR-85-148. It is intended that a future revision of this Standard will include additional requirements for derating for other environments (e.g. Airborne Uninhabited Cargo). Since this Standard specifies the minimum derating requirements, (sub)contractors may derate in excess of these requirements.
2015-10-12
WIP Standard
J1699/3
The main purpose of this Recommended Practice is to verify that vehicles are capable of communicating a minimum subset of information, in accordance with the diagnostic test services specified in SAE J1979: E/E Diagnostic Test Modes, or the equivalent document ISO 15031-5: Communication Between Vehicle and External Equipment for Emissions-Related Diagnostics – Part 5: Emissions-related diagnostic services. Any software meeting these specifications will utilize the vehicle interface that is defined in SAE J2534, Recommended Practice for Pass-Thru Vehicle Programming.
2015-09-29
WIP Standard
ARP6348
This document provides additional guidance on performing lifetime assessments and mitigations for ARP6338. It is intended for use by designers, reliability engineers, and others associated with the design, production, and support of electronic sub-assemblies, assemblies, and equipment used in ADHP applications.
CURRENT
2015-09-25
Standard
AIR5320A
This SAE Aerospace Information Report (AIR) contains information on most of the major icing simulation ground facilities. An effort was made to obtain data from as many facilities as possible over a two year time period. The data in this document represents the state of the facilities in calendar year 1996. Facilities are constantly changing and upgrading and, therefore, some facility specifications may change during the life of this report. Of the 27 facilities described in this report, the primary use is split with approximately half for engine testing and half for wind tunnel testing. The facilities are limited to ground facilities and, therefore, icing tankers have not been included.
2015-09-22
WIP Standard
EIA632A
This Standard is intended to enable an enterprise to strengthen its competitiveness in global markets by engineering and producing quality systems, and by delivering its products on time at an affordable price or cost. The focus, therefore, is on conceptualizing, creating and realizing a system and the products that make up a system. This Standards was developed as a joint project of the Electronic Industries Alliance (EIA) and the International Counci on Systems Engineering (INCOSE). This effort was chartered by the G-47 Systems Engineering Committee of EIA and has been designed as Project PN-3537. this Standard has been approved by the EIA Engineering Department Executive Committee.
2015-09-17
WIP Standard
J3110
This SAE standard applies to any and all Flushing Methods intended for use to internally clean, decontaminate, and recondition components and sections of the refrigerant circuit within a vehicle air conditioning system. This standard provides testing and acceptance criteria for determining the minimum performance of a Flushing Method, intended for use in the servicing and repair process of vehicle air conditioning system. This standard will only specify the Flushing Method performance criteria. Specifications for air conditioning Flushing Fluids are outlined in SAE J3091.
CURRENT
2015-09-07
Standard
ARP5533A
This SAE Aerospace Recommended Practice (ARP) covers the requirements for a Stationary Runway Weather Information System (referred to as the system) to monitor the surface conditions of airfield operational areas to ensure safer ground operations of aircraft. The system provides (1) temperature and condition information of runway, taxiway, and ramp pavements and (2) atmospheric weather conditions that assist airport personnel to maintain safer and more efficient airport operations. The system can be either a wired system or a wireless system.
CURRENT
2015-09-07
Standard
ARP4990B
This SAE Aerospace Recommended Practice (ARP) provides to the aerospace industry a procedure for the consistent and accurate calculation of fuel flow using turbine flowmeters during development, production, and post overhaul/repair gas turbine engine testing.
HISTORICAL
2015-08-28
Standard
J1939/73_201508
SAE J1939-73 Diagnostics Application Layer defines the SAE J1939 messages to accomplish diagnostic services and identifies the diagnostic connector to be used for the vehicle service tool interface. Diagnostic messages (DMs) provide the utility needed when the vehicle is being repaired. Diagnostic messages are also used during vehicle operation by the networked electronic control modules to allow them to report diagnostic information and self-compensate as appropriate, based on information received. Diagnostic messages include services such as periodically broadcasting active diagnostic trouble codes, identifying operator diagnostic lamp status, reading or clearing diagnostic trouble codes, reading or writing control module memory, providing a security function, stopping/starting message broadcasts, reporting diagnostic readiness, monitoring engine parametric data, etc.
CURRENT
2015-08-28
Standard
J2064_201508
The Scope of SAE J2064 covers coupled hose assemblies intended for containing and circulating lubricant, liquid and gaseous R134a and/or R-1234yf refrigerant in automotive air-conditioning systems. Historically, requirements for the hose used in coupled automotive refrigerant air conditioning assemblies was included in SAE J2064. SAE J2064 has been changed to establish the requirements for factory and field coupled hose assemblies. SAE J3062 has been issued to define requirements for the hose used in these assemblies into its own standard. SAE J2064 also provides the necessary values used in SAE J2727 Mobile Air Conditioning System Refrigerant Emission charts for R-134a and R-1234yf. The certified coupling of MAC hose assemblies is required in meeting certain regulatory requirements. A hose which has met the requirements of SAE J3062 and certified in J2911 must be used as part of the coupled assembly.
Viewing 211 to 240 of 2404