Criteria

Text:
Content:
Display:

Results

Viewing 151 to 180 of 2431
CURRENT
2016-11-12
Standard
AIR4061C
SAE Aerospace Information Report (AIR) 4061 provides best practice guidelines for the integration of Engine Health Management (EHM) system functions within aircraft systems to include both its main engine(s) and any Auxiliary Power Unit(s) (APU). This document provides an overview of some of the functions EHM typically integrates, offers some system variations encountered with different aircraft, and suggests general considerations involved with integration. It presents a sample EHM parameter coverage matrix to show the types of parameters with which a typical EHM system might interface, offers insight into signal and data processing and retrieval, and offers a view of typical EHM parameter requirements by function. Where practical, this document delineates between military and commercial practices.
CURRENT
2016-11-12
Standard
AIR4175B
An effective GSS is vital to the successful implementation of an EMS and is a fundamental part of the total monitoring system design, including asset management. Unlike the on-board part of the EMS which principally uses real time data to indicate when engine maintenance is required, a GSS can offer much greater processing power to comprehensively analyze and manipulate EMS data for both maintenance and logistics purposes. This document reviews the main EMS functions and discusses the operating requirements used to determine the basis design of a GSS, including the interfaces with other maintenance or logistic systems. A brief discussion is also included on some of the more recent advances in GSS technology that have been specifically developed to provide more effective diagnostic capabilities for gas turbine engines.
CURRENT
2016-11-12
Standard
AIR5120A
For Engine Monitoring Systems to meet their potential for improved safety and reduced operation and support costs, significant attention must be focused on their reliability and validity throughout the life cycle. This AIR will provide program managers, designers, developers and customers a concise reference of the activities, approaches and considerations for the development and verification of a highly reliable engine monitoring system. When applying the guidelines of this AIR it should be noted that engine monitoring systems physically or functionally integrated with the engine control system and/or performing functions that affect engine safety or are used to effect continued operation or return to service decisions shall be subject to the Type Investigation of the product in which they'll be incorporated and have to show compliance with the applicable airworthiness requirements as defined by the responsible Aviation Authority.
CURRENT
2016-11-12
Standard
AS6286/4
This document shall be used in conjunction with: AS6286, Training and Qualification Program for Deicing/Anti-icing of Aircraft on the Ground AS6286/1, Processes including Methods AS6286/2, Equipment AS6286/3, Fluids AS6286/5, Health, Safety and First Aid AS6286/6, Aircraft Deicing/Anti-icing Diagrams, No-Spray-Zones
2016-11-09
WIP Standard
AIR6911
The goal of this new Aerospace Information Report is to supplement the content of AS6327™ and provide a reference document for the new Aerospace Standard. This new Aerospace Information Report will serve as a practical resource that offers guidance to the machine operator and Process Engineer for isolating the source(s) of non-repeatability in measured unbalance data. The content will include: • Machine Capability to achieve the specified unbalance tolerances and repeat within those tolerances • Tooling Capability to repeat within the specified unbalance tolerances • Rotor characteristics that may preclude repeating within the required unbalance tolerances.
CURRENT
2016-11-04
Standard
AS9110C
This standard includes ISO 9001:20152 quality management system requirements and specifies additional civil and military aviation maintenance and continuing airworthiness industry requirements, definitions, and notes. It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements. If there is a conflict between the requirements of this standard and customer or applicable statutory or regulatory requirements, the latter shall take precedence.
2016-11-03
WIP Standard
AIR6805
This document will outline existing best practices in the instrumentation of landing gears for in-service operation (including flight test, operational loads monitoring, etc.).
CURRENT
2016-11-01
Standard
AS6286/1
This document shall be used in conjunction with:
CURRENT
2016-10-25
Standard
AS5900C
This SAE Aerospace Standard (AS) establishes the aerodynamic flow-off requirements and test procedures for AMS1424 Type I and AMS1428 Type II, III and IV fluids used to deice and/or anti-ice aircraft. The objective of this standard is to ensure acceptable aerodynamic characteristics of the deicing/anti-icing fluids as they flow off of aircraft lifting and control surfaces during the takeoff ground acceleration and climb. Aerodynamic acceptance of an aircraft ground deicing/anti-icing fluid is based upon the fluid’s boundary layer displacement thickness (BLDT) on a flat plate, measured after experiencing the free stream velocity time history of a representative aircraft takeoff. Acceptability of the fluid is determined by comparing BLDT measurements of the candidate fluid with a datum established from the values of a reference fluid BLDT and the BLDT over the dry (clean) test plate.
CURRENT
2016-10-25
Standard
ARP6257
This document establishes standard phraseology for the communication procedures during aircraft ground deicing operations. NOTE: The minimum requirements to accomplish an aircraft deicing operation are specified in the AS6285 document.
CURRENT
2016-10-20
Standard
J2892DA_201610
This Digital Annex (DA) contains the current, full-PDF version of J2892, Graphic-Based Service Information, and all of the 130 referenced graphical symbols. Each of the symbols is presented in two file formats, Adobe Illustrator (vector art) and Portable Network Graphic (raster image), and can be used by purchasers according to the terms of the included license agreement.
CURRENT
2016-10-20
Standard
J2913_201610
This SAE Standard provides testing and functional requirements to meet specified minimum performance criteria for electronic probe-type leak detectors. The equipment specified here will identify smaller refrigerant leaks when servicing motor vehicle air conditioning systems, including those engineered with improved sealing and smaller refrigerant charges to address environmental concerns and increase system efficiency. This document does not address any safety issues concerning the equipment design or use beyond that of sampling a flammable refrigerant save those described in 3.1 and 3.2 of this document. All requirements of this standard shall be verified in SAE J2911.
2016-10-13
WIP Standard
J3005-2
SAE J3005-2 describes OBD interface security guidelines for J1979 communications and best practices for telematic devices connected with the SAE J1962 OBD vehicle connector.
2016-10-11
WIP Standard
AIR5713A
An industry survey has been completed to determine the incidence of jam and excessive backlash in rotary and linear mechanical actuators subject to "primary flight control like" duty cycles. The data is valuable for understanding how existing mechanical actuators behave in service, identifying areas for potential improvement and possibly being used as a reference to support future primary flight control system trade-off studies.
2016-10-05
WIP Standard
ARP4163A
This document establishes general design criteria, tolerances, and limits of application for tooling, fixtures and accessories for mounting and driving gas turbine engine rotors on horizontal and vertical balancing machines. For your own safety, while using balancing tooling, regard the safety instructions of the individual supplier.
2016-09-26
WIP Standard
AMS2647F
This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.
CURRENT
2016-09-22
Standard
AS6286/5
This document shall be used in conjunction with:
CURRENT
2016-09-13
Standard
J1707_201609
This SAE Recommended Practice provides basic recommendations for dispensing and handling of SAE J1703 and SAE J1704 Brake Fluids by Service Maintenance Personnel to assure their safe and effective performance when installed in or added to motor vehicle hydraulic brake actuating systems. This document is concerned only with brake fluid and those system parts in contact with it. It describes general maintenance procedures that constitute good practice and that should be employed to help assure a properly functioning brake system. Recommendations that promote safety are emphasized. Specific step-by-step service instructions for brake maintenance on individual makes or models are neither intended nor implied. For these, one should consult the vehicle manufacturer’s service brake maintenance procedures for the particular vehicle. Vehicle manufacturer’s recommendations should always be followed.
2016-09-07
WIP Standard
J3005-1
SAE J3005-1 is being published as a new document which replaces J3005:20140602 ( Guidance for Remote I/M programs, Portable Emission Measurement Systems (PEMS), GPS, Wireless-LAN or Bluetooth interfaces and insurance devices.) The SAE J3005-1 devices are not intended to be used for SAE J1699-3 vehicle validation testing. The document focuses on OBD mandated communication protocols defined in SAE J1979.
2016-09-06
WIP Standard
J2809
This Technical Information Report defines the proprietary diagnostic communication protocol for ABS or VSA ECU (Electronic Control Unit) implemented on some Honda vehicles. This protocol does not apply to all Honda vehicles. This document should be used in conjunction with SAE J2534-2 in order to fully implement the communication protocol in an enhanced SAE J2534 interface. The purpose of this document is to specify the requirements necessary to implement the communication protocol in an enhanced SAE J2534 interface.
2016-09-06
WIP Standard
J2819
This Technical Information Report defines the diagnostic communication protocol TP2.0. This document should be used in conjunction with SAE J2534-2 in order to fully implement the communication protocol in an SAE J2534 interface. Some Volkswagen of America and Audi of America vehicles are equipped with ECU(s), in which a TP2.0 proprietary diagnostic communication protocol is implemented. The purpose of this document is to specify the requirements necessary to implement the communication protocol in an SAE J2534 interface.
2016-08-31
WIP Standard
ARP5758A
This document describes a recommended practice and procedure for the trending of parameters to maintain the test cell correlation status. Trending is performed to monitor test cells for changes that can affect engine performance or the data acquired from engine tests.
CURRENT
2016-08-29
Standard
AIR1168/4B
This section presents the basic equations for computing ice protection requirements for nontransparent and transparent surfaces and for fog and frost protection of windshields. Simplified graphical presentations suitable for preliminary design and a description of various types of ice, fog, frost, and rain protection systems are also presented.
CURRENT
2016-08-19
Standard
AS6285
This document establishes the minimum requirements for ground based aircraft deicing/anti-icing methods and procedures to ensure the safe operation of aircraft during icing conditions on the ground. This document does not specify the requirements for particular aircraft models. NOTE: Refer to particular aircraft operator or aircraft manufacturers’ published manuals and procedures. The application of the procedures specified in this document are intended to effectively remove and/or prevent the accumulation of frost, snow, slush or ice contamination which can seriously affect the aerodynamic performance and/or the controllability of an aircraft. The principal method of treatment employed is the use of fluids qualified to AMS1424 and AMS1428 (Type I, II, III, and IV fluids). All guidelines referred to herein are applicable only in conjunction with the applicable documents.
CURRENT
2016-08-15
Standard
AMS1426D
This specification covers a glycol-base deicing/anti-icing material in the form of a liquid.
CURRENT
2016-07-19
Standard
ARD6888
The purpose of this document is to specify the functional requirements for a miniature connector to be used for health monitoring purposes on aircraft (including harsh environments such as found in propulsion systems). It is actually a family of miniature connectors that is specified in this document for various uses (e.g., pin counts) and environments. This specification will be used by the SAE committee for connectors (AE-8C1) to study the feasibility of developing a dedicated connector standard.
CURRENT
2016-07-12
Standard
GEIAOP0003
This handbook details the TechAmerica Technical Fellowship Selection Process. It identifies the tasks to be performed and associates them with participants in the process. The focus is intended to keep the process implementation as uniform as possible. There are three types of information in this handbook: Process details Candidate Application Package format Process infrastructure and description Each Section of this handbook describes a significant segment of the selection process. There are also appendices that contain a variety of supporting material relevant to the different process participants.
Viewing 151 to 180 of 2431