Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 188
2017-08-27
Article
Engineered Propulsion Systems (EPS) Graflite V8 4.3-L, four-stroke engine is rated at 320 to 420 hp. It is expected to go into production in 2018.
2017-07-18
Article
The SmartCap telematics device can be used to monitor new and existing Perkins mechanical and electronic engines, sending data directly to the Perkins My Engine App.
2016-04-19
Article
Experts see a loss of motorist trust if cyber attacks are possible. Common command for automotive service is one example of dangers that must be addressed.
2016-03-12
Article
Jeep Design is taking seven new concept vehicles, including two interesting pickups, to the Utah off-road festival where the hardest-core Jeep enthusiasts gather annually.
2015-11-24
Article
As progress has been made toward adopting aluminum for automotive structures, industry leaders have realized that, to keep aluminum vehicles safe, they must consider not just their manufacturing process but also their repair. I-CAR helps technicians learn the necessary new methods for working with aluminum.
2015-11-03
Article
A two-door muscle car prepped for year-round road conditions is the driving influence behind the fully functional Dodge AWD concept.
2015-10-19
Article
Ricardo introduces a unique service to re-industrialize complex service parts with critical inventory shortages, leveraging expertise in low-volume and high-complexity powertrain sourcing.
2015-07-23
Article
The companies have partnered to jointly develop and commercialize a next-generation exhaust system for heavy trucks that incorporates thermoelectric waste heat recovery.
2015-03-04
Article
Drivers who live where it gets really cold in the winter know the value of remote-starting systems. In this episode of SAE Eye on Engineering, Senior Editor Lindsay Brooke looks at remote-starting technology. 
2015-01-21
Article
Tech Mahindra Ltd. recently launched its Automotive Aftermarket Suite, which enables the company to offer solutions in telematics and sensor-based predictive maintenance for thousands of cars on the road worldwide.
2015-01-05
Article
Current products from 3M can be used to repair aluminum- and carbon fiber-intensive vehicles, but the company is working with OEMs such as General Motors to develop optimized solutions for multi-material structural applications.
2014-12-16
Article
The gradual path to semi or fully autonomous drive is seen for connectivity and electromechanical hardware, with improvements to data bandwidth for maximum connectivity, enhanced GPS for greater accuracy, and mining "Big Data" needed for traffic management.
2014-11-26
Article
High-tech design causes time to remanufacture engines to nearly triple and adds to cost, while used engines remain a competitive factor. However, Purdue University data shows remanufacturing is far more energy efficient than installing a new powerplant.
2014-11-24
Article
SEMA develops step-by-step system in conjunction with California Air Resources Board to help participating members comply with emissions regulations. Clemson University I-CAR is an active participant, providing laboratory facilities for analysis to aid SEMA members who are aftermarket manufacturers.
2014-11-18
Article
"Craft shop" approach of low-volume, all-aluminum, high-end makes is too restrictive for America's best-selling vehicle. SEMA Show training classes by I-CAR demonstrate special techniques necessary and the learning curve for mainstream body shop technicians.
2014-11-18
Article
Potential exists for more efficient re-use of rare earth elements, Purdue professor asserts. Regardless of choice, original component design should be engineered for dismantling to enhance end-of-life recovery, he tells Automotive Aftermarket Industry Week forum in Las Vegas.
2014-11-04
Article
The basic architecture of General Motors' small block V8 has remained the same since 1955, but now a new crate engine with modern-day advanced technologies is available on the aftermarket.
2014-06-23
Article
For over 40 years, Alpina has been BMW's 'outside' tuning house. Their CEO explains the synergies behind his company's success.
2014-06-16
Article
SAE International and the Consumer Electronics Association (CEA) have signed a two-year memorandum of understanding to build a cooperative partnership in the standardization of vehicle electronics and consumer electronics products to improve the driving experience.
2014-04-29
Article
Volvo Buses recently opened its fourth Volvo Bus Center in India, this one in Bangalore. The company’s “bus centers” are an aftermarket concept offering a range of services, parts, training, and “soft solutions” at one location, with the aim of enhancing product uptime, product upkeep, and the overall customer experience.
2014-04-22
Article
The SAE International Motor Vehicle Council (MVC) has indicated support for a proposal by the Historic Vehicle Association (HVA) to cooperate in the development and publication of best-practice guidelines for preservation, restoration, and responsible use of historic vehicles.
2014-04-10
Article
Dangers from malware, including ransom demands, must be pro-actively avoided as industry and owners enter era of connected cars. For all their conveniences, telematics could pose ugly series of risks that will require new approaches to prevent, explains Cisco Systems scientist to SAE Congress attendees. Vulnerabilities are in many areas, including the OBD system.
2014-01-22
Article
The patented V-Raptor Bucket from Leading Edge Attachments, Inc. is a ripper/bucket combination for excavators and backhoes that allows the operator to rip rock, coral, or frozen ground with the maximum breakout force; pry out and carry stumps or cradle boulders; rip a clean narrow V trench for laying utilities; plus scoop and load material.
2014-01-06
Article
Wheel rim components made of 3/4-in steel plate in diameters to 40 in (1016 mm) and larger for use on tractors and other off-highway vehicles are fabricated by Acme Metal Spinning. Available in quantities of five to a few hundred or more, these components are fabricated using Acme’s advanced metal spinning processes.
2014-01-06
Article
Rexroth engineers connect with fans and followers via Facebook and Twitter on Tech Tip Tuesdays, sharing knowledge about mechanical and electrical engineering, hydraulics, drives and controls, linear motion, and retrofits and maintenance.
2014-01-06
Article
Its CalAmp-supplied module, which plugs into OBD II connector, can access vehicle data such as from the powertrain, but if given OE access, can offer more, including voice command of texting and browsing. With Access Via Mobile coming to Chrysler products later in 2014, popular smartphone apps also will be available on touchscreen.
2013-12-06
Article
2015 Nissan GT-R and 2014 Sentra "concept" introduced at Los Angeles Auto Show, along with 2014 NISMO RS version of Juke, join the "just NISMO" that's already on sale. GT-R's 3.8-L V6 is up from 545 to 600 hp (406 to 488 kW). Juke RS performance raised to 215 hp (160 kW) with six-speed manual.
2013-12-06
Article
According to SAE International's AS6496, a work-in-progress standard called "Fraudulent/Counterfeit Electronic Parts: Avoidance, Detection, Mitigation, and Disposition – Authorized/Franchised Distribution," there has been a significant and increasing volume of fraudulent/counterfeit electronic parts entering the supply chain.
2013-12-05
Article
Bringing the aftermarket into advanced connected-car era raises technological and legal issues, but SEMA show exhibitors and forum speakers display ability to participate. Aisles of retrofit kits for electronic feature content show aftermarket's intent.
2013-11-26
Article
New GT replaces GT350 and includes two supercharged versions. Top model is rated at 624 hp and has claimed 0-60 mph of 3.7 s, quarter-mile time of mid-11 s. Conversions are made to customer's 2011-14 Mustang GT at Shelby's Las Vegas, NV, facility.
Viewing 1 to 30 of 188

Filter

  • Article
    188