Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 336
2017-01-27
WIP Standard
ARP5628A
This document recommends criteria and requirements for a Final Approach Spacing System (FASS) for transport aircraft. This is an Aerospace Recommended Practice to support the development of a Final Approach Spacing System (FASS) for Approach Spacing for Instrument Approaches (ASIA) operations.
2017-01-27
WIP Standard
ARP4102/4A
This document recommends design criteria for the Flight Deck Alerting System. The FAS shall enhance safety of flight by providing early crew recognition of aircraft system or component status or malfunction as well as of crew operational error. The FAS, therefore, relates to aircraft configuration and flight phase as well as the aircraft systems. To fulfill this objective, the FAS must attract the attention of the crew, must state with clarity the nature and location of the problem, and must be highly reliable and thoroughly responsive to the operational requirements and environment. Wherever possible, it should provide guidance as to the corrective action.
2016-11-23
WIP Standard
AS407E
To specify minimum requirements for Fuel Flowmeters for use primarily in reciprocating engine powered civil transport aircraft, the operation of which may subject the instruments to the environmental conditions specified in Section 3.3. This Aeronautical Standard covers two basic types of instruments, or combinations thereof, intended for use in indicating fuel consumption of aircraft engines as follows: TYPE I - Measure rate of flow of fuel used. TYPE II - Totalize amount of fuel consumed or remaining.
2016-10-24
WIP Standard
J3132
This SAE Standard specifies the minimum performance recommendation for spark plugs intended for use in various internal combustion engines including Automotive, Marine, Motorcycle and Utility engine applications. This standard is not intended to supply information for spark plugs used in aircraft applications of any type.
2016-10-03
WIP Standard
ARP4102/12B
This document specifies requirements for an Airborne Landing Guidance System (ALGS) electronic device. This equipment shall derive relative aircraft position and situation information for flight along precision three-dimensional paths within the appropriate coverage area. The precision three-dimensional path may be an ILS straight-in look-alike path or a complex, curved path. The requirements are applicable to electronic devices capable of receiving signals or other information from one or more sources, including but not limited to ILS, MLS, GNSS, or IRU inputs.
2016-09-28
WIP Standard
ARP4102/11D
This document recommends criteria for Airborne Windshear Systems, including operational objectives, characteristics and functional requirements. The recommendations of the document apply to transport aircraft, and describe the operational objectives of windshear alerting systems, situational displays, guidance systems and avoidance/detection systems.
2016-09-28
WIP Standard
ARP4102/13B
This document recommends criteria for a system designed to manage and communicate information via data link to support flight operations.
2016-09-28
WIP Standard
ARP4102/5SECT3A
This document recommends design criteria for the flight deck installation of electrically signaled flight control systems on fixed wing airplanes.
2016-09-28
WIP Standard
ARP4102/5SECT1A
This document recommends design criteria for the flight deck installation of electrically signaled engine control systems.
CURRENT
2016-03-16
Standard
AS6296
This SAE Aerospace Standard (AS) specifies minimum performance standards for Electronic Flight Information System (EFIS) displays that are head-down and intended for use in the flight deck by the flight crew in all 14 CFR Part 23, 25, 27, and 29 aircraft. This document is expected to be used by multiple regulatory agencies as the basic requirement for a technical standard order for EFIS displays. The requirements and recommendations in this document are intended to apply to, but are not limited to, the following types of display functions: Primary Flight and Primary Navigation displays, including vertical situation and horizontal situation functions. Displays that provide flight crew alerts, which may include engine instrument, aircraft systems information/control. Control displays including communication, navigation and system control displays.
CURRENT
2016-03-16
Standard
AS50571B
This specification covers the general requirements for red and white individual instrument lights. This document has been streamlined. Appendix A to MIL-L-5057F lists those documents required for MIL-L-5057F acquisition and is a mandatory part of MIL-L-5057F. Those documents listed in Appendix A have the same status as those referenced directly in MIL-L-5057F (first tier documents). All other documents, referenced through tiering, may be used as guidance and information to supplement MIL-L-5057F. This document’s scope is limited to lamp source designs solely. Furthermore, the use of red lighting should not be considered for new design and included within this document to support requirements for existing military aircraft that still operate with this system of lighting.
2016-02-10
WIP Standard
ARP4927A
This SAE Aerospace Recommended Practice (ARP) provides guidance to achieve the optimum integration of new aircraft systems which have an impact on the cockpit layout or crew operating procedures. This process may also be used for modification of existing cockpits.
2016-02-03
WIP Standard
ARP6377
Develop and propagate recommended practices for the design, development, testing and implementation of head worn displays in piloted airborne platforms
CURRENT
2016-02-03
Standard
J2976_201602
This recommended practice is intended to provide industry technical personnel with an overview of vehicle speedometer system accuracy and offset requirements and odometer system accuracy requirements. Speedometer and odometer systems covered by this document are integrated into a vehicle's electrical and electronics system, assembled directly into the vehicle by the OEM, and use rotational data from at least one vehicle wheel that is appropriately converted into longitudinal vehicle speed and distance traveled information. This standard is limited to radial ply tires on new (as manufactured) cars, light trucks, and medium duty trucks. Other methods for measuring vehicle speed and distance traveled may be used provided they meet the performance recommendations herein. Any local market regulatory requirements must be met and shall supersede this document. Service parts are beyond the scope of this recommended practice.
2016-01-25
WIP Standard
AIR6373
pilots, air traffic controllers, dispatchers, aviation meteorologists
2016-01-18
WIP Standard
ARP4101/8A
This document recommends criteria for standardization of flight deck interior doors and their operation which will provide optimum use under normal and emergency conditions.
2016-01-18
WIP Standard
ARP4102/10B
This document presents criteria for flight deck controls and displays for airborne collision avoidance systems providing vertical-only guidance, and provides design guidance for operational, functional, and installation characteristics and requirements for airborne collision avoidance systems in existing and future aircraft.
2016-01-15
WIP Standard
J548/3
This standard will be an updated version of SAEJ548/1. It is intended to specify the design requirements and dimensions for spark plugs and their cylinder head mounting. This standard will cover automotive, light duty non-automotive and small engine spark plugs. It does not include aircraft and large industrial engine type spark plugs..
2015-12-03
WIP Standard
J1757-2
Set-up a consistent geometry and requirements for measuring the Vehicles HUD, covering the AR-HUD performance.
CURRENT
2015-10-08
Standard
J1810_201510
This SAE Standard describes those factors which affect the accuracy and reliability of voltage indicating units and electrical indicating and sending units for fuel level, pressure, and temperature suitable for off-road, self-propelled work machines as described in SAE J1116 and agricultural tractors as defined in ASAE S390. Indicating units are divided into two groups, fully sealed and partially sealed. Serviceable lighting is not covered by this document unless otherwise specified. No ISO document has been found to be compatible.
2015-10-07
WIP Standard
J3113
SAE Jxxxx provides principles and a process for developing icons for use in electronic displays related to Off Road Work Machines as stated defined in SAE J 1116. Following the process insures that icons are derived from ISO registered graphical symbols or ISO compliant non-registered graphical symbols.
CURRENT
2015-05-07
Standard
J1757/1_201505
The scope of this SAE Standard is to provide methods to determine display optical performance in all typical automotive ambient light illumination - with focus on High Ambient Contrast Ratio, which is critical for display legibility in a sunshine environment. It covers indoor measurements and simulated outdoor lighting. It is not the scope of this document to set threshold values for automotive compliance. However some recommended values are presented for reference.
2014-10-24
WIP Standard
J2032
This SAE Standard specifies the general requirements and test methods for nonshielded high-tension ignition cable assemblies.
2014-10-23
WIP Standard
J973
This SAE Recommended Practice is intended to provide any technical person or group interested in ignition system design and/or evaluation with the specific equipment, conditions, and methods which will produce test results definitive and reproducible for his own work and yet sufficiently standardized to be acceptable to other groups working on battery ignition systems for automotive engines.
CURRENT
2014-10-09
Standard
ARP4103A
This document recommends design and performance criteria for aircraft lighting systems used to illuminate flight deck controls, luminous visual displays used for transfer of information, and flight deck background and instrument surfaces that form the flight deck visual environment. This document is for commercial transport aircraft except for applications requiring night vision compatibility.
CURRENT
2014-08-12
Standard
J2031_201408
The specifications contained in this SAE Standard pertain to high tension ignition cable used in road vehicle engine ignition systems.
CURRENT
2014-08-11
Standard
J2032_201408
This SAE Standard specifies the general requirements and test methods for nonshielded high-tension ignition cable assemblies.
CURRENT
2014-07-17
Standard
J139_201407
To provide standard terminology and definitions with regard to ignition systems for spark-ignited internal combustion engines.
2014-06-23
WIP Standard
ARP60494
This ARP covers the system design, human interface considerations, and hardware performance recommendations and requirements for touch interactive electronic display systems installed in the cockpit/flight deck for use by pilots. System design and human interface considerations include: identification of functions that could use and benefit from touch interactions, the pilot and cockpit/flight deck environment characteristics that impact usability, and specific pilot interface characteristics such as touch mode, single and multi touch applications, feedback, latency, potential human error, and basic usability. Also addressed are workload, fatigue, and transition from hard to soft control considerations. Hardware issues cover performance aspects of touch screens installed on cockpit/flight deck displays. This ARP is intended to cover Part 23 and 25 category airplanes as well as Part 27 and 29 rotorcraft.
CURRENT
2014-02-26
Standard
J2203_201402
This SAE Standard defines the standard engine to be used in determining spark plug preignition ratings. The engine is known as the SAE 17.6 Cubic Inch Spark Plug Rating Engine.
Viewing 1 to 30 of 336

Filter

  • Standard
    336