Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 550
2017-09-14
WIP Standard
J356
The SAE Standard covers normalized electric-resistance welded flash-controlled single-wall, low-carbon steel pressure tubing intended for use as pressure lines and in other applications requiring tubing of a quality suitable for bending, double flaring, beading, forming, and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path that would be caused by the ID weld bead or scarfed region. Assumption of risks when using this material for single flare applications to be defined by agreement between the producer and tube purchaser. This specification also covers SAE J356 Type-A tubing. The mechanical properties and performance requirements of standard SAE J356 and SAE J356 Type-A are the same. Therefore, the designated differences of Type-A tubing are not meant to imply that Type-A tubing is in anyway inferior to standard SAE J356.
2017-09-14
WIP Standard
J527
This SAE Standard covers brazed double wall low-carbon steel tubing intended for general automotive, refrigeration, hydraulic, and other similar applications requiring tubing of a suitable quality for bending, flaring, beading, forming, and brazing.
CURRENT
2017-09-11
Standard
AS5958F
This SAE Aerospace Standard (AS) establishes the requirements for externally swaged titanium tube fittings on titanium and CRES tubing with flareless separable fitting for use in hydraulic supply and return aerospace fluid systems up to operating pressure of 5080 psig (35 000 kPa) maximum and an operating temperature range of -65 to +275 °F (-54 to +135 °C). This specification covers a common 5080 psi pressure titanium fitting that may be used for a range of operating pressures up to 5080 psi with different tubing materials and tubing wall thicknesses, and is assembled with the same tooling in accordance with AS5959. The fitting operating pressure is based on the fitting thread pitch. Extra fine pitch for 5080 psi operating pressure and fine pitch for operating pressures 3000 psi and less. Table 12 shows applicable aerospace fitting part number standard and tubing materials and operating pressures.
CURRENT
2017-09-07
Standard
AS4157B
This specification covers the requirements for aircraft hydraulic, self-sealing, quick disconnect couplings for use in 8000 lbf/in2 (gage) lightweight hydraulic systems.
CURRENT
2017-07-14
Standard
J1754/1_201707
This SAE Standard covers steel wire reinforced rubber hose assemblies using connectors specified in SAE J516 for use in hydraulic systems using petroleum based hydraulic fluids with maximum working pressures of 1.7 to 42 MPa. See Part 2, Table 7 for hose operating temperature ranges and identification codes. NOTE: Working pressure is defined as maximum system pressure.
CURRENT
2017-07-05
Standard
AS4688C
(A) Propose to replace .5625-16 UNJF with .5625-18 UNJF on Table 3 and other editorial changes (ex. replace ARP4296 with AS4296). (B) Propose revision to add conductive high purity aluminum coating per MIL-DTL-83488 for aluminum alloy fittings. The W code aluminum parts with new finish will be distinguished by new finish code V at the end of part number.
CURRENT
2017-06-28
Standard
AS21914D
Scope unavailable.
CURRENT
2017-06-22
Standard
AS893E
To Stabilize AS893D - issued 1-15-76 per MIL-F-18280 for O2 and GSE only; revised 4 times (12-1-83 to add O2 cleaning requirement and part id note, 1995-12 to reformat to SAE template and revised title, 2008-03 to add cad note, change proc spec to AS4842/2 and associated QML requirements, update matl inactive/can'd specs to active ones, revised wrench flat tolerances, and inactivated 'D' matl for new design, 2009-11 to update to current SAE template along with Table updates and add 'D' inactive effectivity date; reaffirmed twice; April 1983 & 2007-08. No other significant changes to the standard.
CURRENT
2017-06-21
Standard
AS4665C
SCOPE IS UNAVAILABLE.
CURRENT
2017-06-21
Standard
AS4664D
SCOPE IS UNAVAILABLE.
CURRENT
2017-06-21
Standard
AS5230D
SCOPE IS UNAVAILABLE.
CURRENT
2017-06-21
Standard
AS1004G
SCOPE IS UNAVAILABLE.
CURRENT
2017-06-21
Standard
AS1008J
SCOPE IS UNAVAILABLE.
CURRENT
2017-06-21
Standard
AS1007K
SCOPE IS UNAVAILABLE.
CURRENT
2017-06-21
Standard
AS897E
SCOPE IS UNAVAILABLE.
CURRENT
2017-06-20
Standard
AS33931C
SCOPE IS UNAVAILABLE.
CURRENT
2017-06-14
Standard
AS18280F
This SAE Aerospace Standard (AS) establishes the requirements for 24° cone flareless fluid connection fittings and nuts, internally or externally swaged, preset, or welded sleeves for use in aircraft fluid systems at nominal operating pressures up to and including 3000 psi.
HISTORICAL
2017-05-02
Standard
AS5188B
SCOPE IS UNAVAILABLE.
CURRENT
2017-05-02
Standard
AS5165B
SCOPE IS UNAVAILABLE.
2017-04-21
WIP Standard
AS153J
Add integral silicone cuff max length and OD to flared parts standards
CURRENT
2017-04-20
Standard
AS976A
NO SCOPE AVAILABLE.
CURRENT
2017-04-19
Standard
AS24334C
SCOPE IS UNAVAILABLE.
CURRENT
2017-04-14
Standard
J1298_201704
SAE J1298 covers the recommended diagnostic port sizes for use in measuring hydraulic fluid temperature, pressure, flow, and for obtaining fluid samples. See SAE J1502 for the detailed coupling specifications.
CURRENT
2017-04-13
Standard
J518/2_201704
This SAE Standard covers general and dimensional specifications for the Code 62 metric (type 1) and inch (type 2) flanged heads, flange clamps (FC and FCM), and split flange clamps (FCS and FCSM) applicable to four-screw flange type tube, pipe, and hose connections. Also included are the recommended port dimensions and port design considerations. Type 2 (inch) flange clamps and split flanges are not for new design.
2017-04-11
WIP Standard
ARP6539
This SAE Aerospace Recommended Practice (ARP) provides a process for the verification and validation of monitors used in flight control, utility control, and related components and systems. It is intended to serve as a system specific companion document to SAE ARP 4754.
Viewing 1 to 30 of 550

Filter

  • Standard
    550