Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 105
2017-01-27
WIP Standard
ARP5628A
This document recommends criteria and requirements for a Final Approach Spacing System (FASS) for transport aircraft. This is an Aerospace Recommended Practice to support the development of a Final Approach Spacing System (FASS) for Approach Spacing for Instrument Approaches (ASIA) operations.
2017-01-27
WIP Standard
ARP4102/4A
This document recommends design criteria for the Flight Deck Alerting System. The FAS shall enhance safety of flight by providing early crew recognition of aircraft system or component status or malfunction as well as of crew operational error. The FAS, therefore, relates to aircraft configuration and flight phase as well as the aircraft systems. To fulfill this objective, the FAS must attract the attention of the crew, must state with clarity the nature and location of the problem, and must be highly reliable and thoroughly responsive to the operational requirements and environment. Wherever possible, it should provide guidance as to the corrective action.
CURRENT
2017-01-26
Standard
J2808_201701
The Lane Departure Warning (LDW) system is a crash-avoidance technology which warns drivers if they are drifting (or have drifted) out of their lane or from the roadway. This warning system is designed to reduce the possibility of a run-off-road crash. This system will not take control of the vehicle; it will only let the driver know that he/she needs to steer back into the lane. An LDW is not a lane-change monitor, which addresses intentional lane changes, or a blind spot monitoring system which warns of other vehicles in adjacent lanes. This informational report applies to OEM and after-market Lane Departure Warning systems for light-duty vehicles (gross vehicle weight rating of no more than 8500 pounds) on relatively straight roads with a radius of curvature of 500 m or more, and under good weather conditions.
2016-10-03
WIP Standard
ARP4102/12B
This document specifies requirements for an Airborne Landing Guidance System (ALGS) electronic device. This equipment shall derive relative aircraft position and situation information for flight along precision three-dimensional paths within the appropriate coverage area. The precision three-dimensional path may be an ILS straight-in look-alike path or a complex, curved path. The requirements are applicable to electronic devices capable of receiving signals or other information from one or more sources, including but not limited to ILS, MLS, GNSS, or IRU inputs.
2016-09-28
WIP Standard
ARP4102/11D
This document recommends criteria for Airborne Windshear Systems, including operational objectives, characteristics and functional requirements. The recommendations of the document apply to transport aircraft, and describe the operational objectives of windshear alerting systems, situational displays, guidance systems and avoidance/detection systems.
2016-09-28
WIP Standard
ARP4102/13B
This document recommends criteria for a system designed to manage and communicate information via data link to support flight operations.
2016-09-28
WIP Standard
ARP4102/5SECT3A
This document recommends design criteria for the flight deck installation of electrically signaled flight control systems on fixed wing airplanes.
2016-09-28
WIP Standard
ARP4102/5SECT1A
This document recommends design criteria for the flight deck installation of electrically signaled engine control systems.
CURRENT
2016-06-28
Standard
J2830_201606
This recommended practice describes a process for testing the comprehension of static (i.e., fixed or non-dynamic) symbols for all ground vehicles, for both OEM and aftermarket products. With advancing display technology, it is now possible to display dynamic symbols (e.g., a spinning beach ball to show that a process is ongoing, or a diagram showing energy distribution in hybrid vehicles). Such graphics are outside of the scope of this recommended practice, though extensions of this process may be useful for testing them. However, several symbols which occupy the same space on a display may change state without movement (e.g. play/pause button); these are within the scope of this recommended practice. The process described in this recommended practice includes criteria that are used to identify how well the perceived meaning matches the intended meaning for a representative sample of drivers.
CURRENT
2016-06-16
Standard
EIA441
This standard is intended to serve as a guide in the coordination of system design to promote uniformity of the nomenclature and description of the operator devices.
2016-05-18
WIP Standard
AS6906
The standard would include requirements for HSI management [planning, execution, coordination (internal and external) documentation, administration and quality control], including collaboration among HSI domains, coordination between HSI and other disciplines to optimize total system performance, optimize human performance, and minimize personnel-driven risks and customer ownership costs.
2016-05-06
WIP Standard
AS5725C
This standard defines implementation requirements for the electrical interface between: a. aircraft carried miniature store carriage systems and miniature stores b. aircraft parent carriage and miniature stores c. surface based launch systems and miniature stores The interface provides a common interfacing capability for the initialization and employment of smart miniature munitions and other miniature stores from the host systems. Physical, electrical, and logical (functional) aspects of the interface are addressed.
CURRENT
2016-03-11
Standard
J287_201603
This recommended practice describes boundaries of hand control locations that can be reached by a percentage of different US driver populations in passenger cars, multi-purpose passenger vehicles, and light trucks (Class A vehicles). This practice is not applicable to heavy trucks (Class B vehicles).
CURRENT
2016-02-24
Standard
J3048_201602
The purpose of this document is to provide guidance for the implementation of driver-vehicle interfaces (DVI) for intervention-type lane keeping assistance systems (LKAS), as defined by ISO 11270. LKAS provide support for safe lane keeping operations by drivers via momentary intervention in lane keeping actions, but do not automate part or all of the dynamic driving task on a sustained basis (see SAE J3016). Thus they are not classified as a driving automation system per SAE J3016 - Taxonomy and Definitions for Terms Related to On-Road Motor Vehicle Automated Driving Systems, nor do they prevent possible lane or roadway departures, as drivers can always override an LKAS intervention and road conditions may be such that they cannot support an LKAS intervention (e.g., too slippery, curve to tight, lateral velocity too high, etc.).
2016-02-10
WIP Standard
ARP4927A
This SAE Aerospace Recommended Practice (ARP) provides guidance to achieve the optimum integration of new aircraft systems which have an impact on the cockpit layout or crew operating procedures. This process may also be used for modification of existing cockpits.
2016-02-03
WIP Standard
ARP6377
Develop and propagate recommended practices for the design, development, testing and implementation of head worn displays in piloted airborne platforms
2016-01-25
WIP Standard
AIR6373
pilots, air traffic controllers, dispatchers, aviation meteorologists
2016-01-18
WIP Standard
ARP4101/8A
This document recommends criteria for standardization of flight deck interior doors and their operation which will provide optimum use under normal and emergency conditions.
2016-01-18
WIP Standard
ARP4102/10B
This document presents criteria for flight deck controls and displays for airborne collision avoidance systems providing vertical-only guidance, and provides design guidance for operational, functional, and installation characteristics and requirements for airborne collision avoidance systems in existing and future aircraft.
CURRENT
2016-01-02
Standard
AS6030A
This Common Interface Control Plan (CICP) establishes the methodology for developing, controlling, and managing the technical interfaces between and within systems. An interface defines the interaction at a defined point between entities to achieve a combined system capability. A common interface defines the shared interaction between multiple systems on either side of the interface. The document is not intended to directly control any other aspects of program management, such as matters of contractual, financial, or those of an intellectual property rights nature. Members in the interface control process include: procurement authorities, design authorities, and other related agencies as defined in the specific System Interface Control Plan (SICP). For the purposes of this plan, only the terms Procuring Organization and Producing Organization will be used.
CURRENT
2015-12-19
Standard
AS5725B
This standard defines implementation requirements for the electrical interface between: aircraft carried miniature store carriage systems and miniature stores aircraft parent carriage and miniature stores surface based launch systems and miniature stores The interface provides a common interfacing capability for the initialization and employment of smart miniature munitions and other miniature stores from the host systems. Physical, electrical, and logical (functional) aspects of the interface are addressed.
CURRENT
2015-12-03
Standard
J3077_201512
This document provides a summary of the activities to-date of Task Force #1 - Research Foundations – of the SAE’s Driver Vehicle Interface (DVI) committee. More specifically, it establishes working definitions of key DVI concepts, as well as an extensive list of data sources relevant to DVI design and the larger topic of driver distraction.
CURRENT
2015-07-08
Standard
J2286_201507
This interface document SAE J2286 revises the requirements for file formats as were originally described in SAE J1924. This document describes Interface 1 (I/F 1) in SAE J2461. This document does not imply the use of a specific hardware interface, but may be used with other hardware interfaces such as SAE J1939, ISO 15765 or ISO 14229. The requirements of SAE J2286 supersede the requirements defined by SAE J1924.
CURRENT
2015-06-12
Standard
AIR6258
This document is intended to describe technologies available, application needs, and operational requirements relating to the use of fiber optic sensing systems on aerospace platforms: To define standard terminology used in describing fiber optic sensing systems and their performance. To identify current interfaces used for fiber optic sensing systems. To define environmental, reliability, and maintainability capabilities of fiber optic sensing system components. To describe the fiber optic sensor and instrumentation technologies that forms the current state of the art. To describe current and future unmet needs of the aerospace industry for measurements using fiber optic sensors.
CURRENT
2014-09-25
Standard
J2399_201409
Adaptive cruise control (ACC) is an enhancement of conventional cruise control systems that allows the ACC-equipped vehicle to follow a forward vehicle at a pre-selected time gap, up to a driver selected speed, by controlling the engine, power train, and/or service brakes. This SAE Standard focuses on specifying the minimum requirements for ACC system operating characteristics and elements of the user interface. This document applies to original equipment and aftermarket ACC systems for passenger vehicles (including motorcycles). This document does not apply to heavy vehicles (GVWR > 10,000 lbs. or 4,536 kg). Furthermore, this document does not address other variations on ACC, such as “stop & go” ACC, that can bring the equipped vehicle to a stop and reaccelerate. Future revisions of this document should consider enhanced versions of ACC, as well as the integration of ACC with Forward Vehicle Collision Warning Systems (FVCWS).
2014-06-23
WIP Standard
ARP60494
This ARP covers the system design, human interface considerations, and hardware performance recommendations and requirements for touch interactive electronic display systems installed in the cockpit/flight deck for use by pilots. System design and human interface considerations include: identification of functions that could use and benefit from touch interactions, the pilot and cockpit/flight deck environment characteristics that impact usability, and specific pilot interface characteristics such as touch mode, single and multi touch applications, feedback, latency, potential human error, and basic usability. Also addressed are workload, fatigue, and transition from hard to soft control considerations. Hardware issues cover performance aspects of touch screens installed on cockpit/flight deck displays. This ARP is intended to cover Part 23 and 25 category airplanes as well as Part 27 and 29 rotorcraft.
CURRENT
2014-03-31
Standard
J2972_201403
This Information Report contains a definition of road vehicle hands-free operation. This definition applies to driver inputs to a wireless communications device used for person-to-person wireless communications while driving. This report applies to both original equipment manufacturers’ and aftermarket devices. The definition does not apply to outputs, e.g., visual or haptic feedback, from a communication system or device, regardless of the modality of human-machine interface. It also does not apply to parallel or redundant manual control operating modes.
CURRENT
2014-02-01
Standard
HEB1B
This Engineering Bulletin and its annexes provide guidance on the application of Human Engineering principles and practices to the analysis, design, development, testing, fielding, support, accident investigation, and training for military and commercial products throughout their intended life cycles.
2013-11-26
WIP Standard
AIR6288
This document describes operational scenarios and examples of system operation based on the experience of different developers of airborne wake vortex safety systems. This information is intended to supplement the recommendations and guidance given in ARP 6267 “Airborne Wake Vortex Safety Systems” as well as facilitate the application of other wake vortex standards and guidance documents generated by SAE and RTCA.
CURRENT
2013-07-18
Standard
ARP4101/6A
This document recommends general specifications for the location, accessibility and restraint for those items of survival, emergency, and miscellaneous equipment which are intended to be used by the flight crew, and which are stowed on or near the flight deck.
Viewing 1 to 30 of 105

Filter

  • Standard
    105