Criteria

Text:
Content:
Display:

Results

Viewing 181 to 210 of 1253
CURRENT
2014-02-13
Standard
ARP6467
This SAE Aerospace Recommended Practice (ARP) includes the minimum human factors requirements and recommendations for the flight deck display of data linked Aeronautical Information (AI), specifically Notices to Airmen (NOTAMs). The goal of human factors is to make it easy for users to do things right and hard to do them wrong. The guidance in this ARP supports this goal by defining minimum requirements and recommendations that focus on the text and potential graphics for NOTAMs as well as the human’s interaction with these on the flight deck. In this ARP “flight deck” includes both single pilot flight decks as well as multi-pilot flight decks. The FAA defines NOTAMs1 as any information concerning the establishment, condition, or change in any component of, or hazard to, the National Airspace System.
CURRENT
2014-02-13
Standard
ARP1894B
The scope of this document is to provide a guideline for the preparation of a plan for testing of inservice chemical oxygen generators to confirm their design useful life. The test program should also allow determination with a sufficient level of confidence, whether generators are suitable for further use (i.e., life extension, or if the useful life limit has been reached).
CURRENT
2014-02-01
Standard
HEB1B
This Engineering Bulletin and its annexes provide guidance on the application of Human Engineering principles and practices to the analysis, design, development, testing, fielding, support, accident investigation, and training for military and commercial products throughout their intended life cycles.
2014-01-29
WIP Standard
AIR825/13A
This guide is intended to promote safe designs, operations and maintenance on aircraft and ground support oxygen systems. This is also a summary of some work by the ASTM G 4 Committee related to oxygen fire investigations and design concerns to reduce the risk of an oxygen fire. There have been many recent technological advances and additional test data is available for evaluating and controlling combustion hazards in oxygen equipment. Standards that use this new information are rapidly evolving. A guide is needed to assist organizations and persons not completely familiar with this process to provide oxygen systems with minimum risks of combustion. This guide does not necessarily address all the detailed issues and provide all data that will be needed. For a complete analysis, supplemental publications need to be consulted. This guide does discuss the basics of oxygen systems fire hazards. The hazard analysis process is discussed and a simple example to explain this process.
CURRENT
2014-01-24
Standard
J1834_201401
This SAE Recommended Practice provides design, test, and performance guidelines on the comfort, fit, and convenience for active restraint systems for heavy trucks and multipurpose passenger vehicle applications over 10 000 lbs gross vehicle weight rating (GVWR). The information pertains to the forward facing seating positions.
HISTORICAL
2014-01-14
Standard
AIR1168/4A
This section presents the basic equations for computing ice protection requirements for nontransparent and transparent surfaces and for fog and frost protection of windshields. Simplified graphical presentations suitable for preliminary design and a description of various types of ice, fog, frost, and rain protection systems are also presented.
CURRENT
2014-01-07
Standard
AIR512F
This document covers the general recommendations for cabin lighting in order to provide satisfactory illumination for, but not limited to: Boarding and deplaning Movement about the cabin Reading Use of lavatories Use of work areas Using stowage compartments, coat rooms, and closets Using interior stairways and elevators (lifts)
CURRENT
2014-01-07
Standard
AIR171E
This document presents a glossary of many of the terms that can be found in literature covering issues related to aviation oxygen systems and associated topics. Such a listing can never be all inclusive but the majority of important terms are anticipated to be included for reference.
CURRENT
2014-01-07
Standard
ARP5029A
This SAE Aerospace Recommended Practice (ARP) provides the user with standardized guidelines for the measurement of effective intensity of strobe anticollision lights for aircraft in the laboratory, in maintenance facilities, and in the field. A common source of traceability for calibration of the measurement systems, compensation for known causes of variation in light output, and recommendations which minimize sources of errors and uncertainties are included in this document. Estimates of uncertainty and error sources for each class of measurement are discussed.
CURRENT
2014-01-07
Standard
AS18276B
This specification covers the installation of aircraft interior lighting for military aircraft.
CURRENT
2013-12-17
Standard
J1308_201312
This practice applies to guarding of engine cooling fans used on Off-Road Self-Propelled Work Machines defined in SAE J1116. It does not include guarding for belts, pulleys, or other rotating equipment used on these machines.
2013-11-26
WIP Standard
AIR6288
This document describes operational scenarios and examples of system operation based on the experience of different developers of airborne wake vortex safety systems. This information is intended to supplement the recommendations and guidance given in ARP 6267 “Airborne Wake Vortex Safety Systems” as well as facilitate the application of other wake vortex standards and guidance documents generated by SAE and RTCA.
CURRENT
2013-11-13
Standard
J1091_201311
This SAE Standard specifies a stationary test method for determining the masking effect caused by parts of the base machine with equipment as specified by the manufacturer on a visibility test circle around the machine from the eye position point of a seated operator. It specifies a method for evaluating the maskings that may be present. It applies to earthmoving machines which have a specific operator’s station. It does not consider evaluation of maskings which may be present with operational movement of working tools.
CURRENT
2013-11-13
Standard
J2331_201311
This SAE Standard specifies a stationary test method for determining and documenting the masking effect caused by parts of the base machine with equipment as specified by the manufacturer within a visibility test circle around the eye position of a seated operator. It applies to earthmoving machinery which has a specific seated operator’s position.
CURRENT
2013-10-20
Standard
ARP4967B
This document is intended to highlight critical design issues that a panel designer should understand when designing panels for NVIS applications. It is not intended to be a discussion of the benefits of one lighting technology versus another. See ARP4168 for a more complete discussion of these lighting technologies.
CURRENT
2013-10-10
Standard
ARP1315E
This SAE Aerospace Recommended Practice (ARP) establishes safety recommendations for lavatories in transport category airplanes.
CURRENT
2013-10-08
Standard
ARP881F
This SAE Aerospace Recommended Practice (ARP) lists the lamps in Table 1 that are recommended for the type of service indicated. This list is not intended as a catalog and does not include many types that are now in use. This specification is not applicable to Solid State Lighting Lamp Assemblies (Based LED lamps). It does, however, reflect current practice.
CURRENT
2013-10-04
Standard
ARP924B
This SAE Aerospace Recommended Practice (ARP) covers the requirements for the types of glass to be utilized in the fabrication of cover glasses and lighting wedges used in aerospace instruments. It defines the maximum extent of physical defects and recommends standard methods of inspection and evaluation. Definitions of terminology used in this document are covered in 2.2.
2013-10-02
WIP Standard
J153
These general operator precautions apply to off-road work machines as defined in SAE J1116, and Agricultural Tractors as defined in ANSI/ASAE S390, Nov 2004. These should not be considered as all inclusive for all specific uses and unique features of each particular machine. Other more specific operator precautions not mentioned herein should be covered by users of this recommended practice for each particular machine application.
2013-10-01
WIP Standard
J1533
This SAE Recommended Practice establishes a uniform test procedure for determining performance levels of operator enclosure panel type air filters on off-road, self-propelled work machines used in construction, general-purpose industrial, agriculture, and forestry as defined in SAE J1116 and equipped with an operator enclosure with a powered fresh air system.
2013-09-30
WIP Standard
J169
The purpose of this document is to establish air conditioning design guidelines that will apply to most systems rather than the specific design of any particular system. Operating conditions and characteristics of the equipment will determine the design of any successful system, and since these characteristics and conditions vary greatly from one application to another, the designer must determine the goals expected to be reached under the conditions encountered. To determine the capacity of such items as blowers, condenser fans, condenser coils, evaporator coils, filters, compressors, etc., will require the adherence to several guidelines, some of which are outlined in this document.
CURRENT
2013-09-19
Standard
ARP695E
This Aerospace Recommended Practice provides design and installation criteria intended to enhance overall safety by mitigating exposure of cabin crew and passengers to risks from: Routine use of galley systems. Galley components or equipment becoming dislodged under routine or abnormal operating conditions and under survivable crash or ditching conditions. Malfunctions of, or defects in, a galley system or associated galley equipment. NOTE: It is not the purpose of this Aerospace Recommended Practice to specify the specific designs or design methods to be followed in the accomplishment of stated objectives.
CURRENT
2013-09-19
Standard
AIR5401A
This SAE Aerospace Information Report (AIR) provides information demonstrating the need for establishing design and performance standards for aircraft crash axes.
CURRENT
2013-09-19
Standard
ARP499C
The purpose of this SAE Aerospace Recommended Practice (ARP) is to provide recommendations which will lead to the standardization of passageway door operation in all transport aircraft, by providing in the design, features which will result in minimum exit passage blockage and jamming.
CURRENT
2013-09-13
Standard
ARP6023
The scope of this Vertical Flight document is limited to human behavioral technologies associated with design and/or implementation of Enhanced Synthetic Vision Systems (ESVS) in vertical flight aircraft. Any overlap into logic problems or hardware/software design shall be considered to be incidental to the human factors issues. Where the performance characteristics of specific technologies are relevant they will be identified, and where performance criteria are relevant to specific intended functions/use they will be identified. From a regulatory view, intended function (Full Flight Guidance or Information/Situation Awareness support) has a tremendous effect upon the design of an ESV System. However from a Human Engineering standpoint, the information on display must be discernible and comprehensible to the human operator in both cases and differences may be primarily in information content (required to support a specific task).
2013-08-14
WIP Standard
ARP6269
The scope of this document is to provide recommended practices for the development and implememtation of training programs for the issuance of a Multi-Crew Pilot License (MPL). The recommended practices contained within this documernt are intended primarily for the guidance of passenger and cargo air carriers, and training providers.
CURRENT
2013-08-06
Standard
AS4073A
This SAE Aerospace Standard (AS) defines the requirements for air cycle air conditioning systems used on military air vehicles for cooling, heating, ventilation, and moisture and contamination control. General recommendations for an air conditioning system, which may include an air cycle system as a cooling source, are included in MIL-E-18927E (AS) and JSSG-2009. Air cycle air conditioning systems include those components which condition high temperature and high pressure air for delivery to occupied and equipment compartments and to electrical and electronic equipment. This document is applicable to open and closed loop air cycle systems. Definitions are contained in Section 5 of this document.
CURRENT
2013-08-05
Standard
J1051_201308
This SAE Standard provides a method to obtain consistent force-deflection data of finished (or unfinished, when specified) cushioned components of seats for off-road work machines as listed in SAE J1116. This data may be helpful in maintaining seat comfort characteristics and quality control. There is no intent to establish any acceptance criteria.
CURRENT
2013-07-24
Standard
J919_201307
This SAE Standard sets forth the instrumentation and procedure to be used in measuring sound pressure levels at the operator position for self-propelled off-road work machines as defined in SAE J1116. This document does not address the operation of safety devices such as backup alarms, horns, or accessories. This SAE document is applicable to machines that have operator stations where the operator can either stand or sit and will be either transported by, or walk with the machine during its operation. The sound levels obtained using this procedure are repeatable and representative of the higher range of sound levels generated by machines under actual field operating conditions. Due to variability of field operating conditions, this data is not intended to be used for operator noise exposure evaluations.
CURRENT
2013-07-18
Standard
ARP4101/9A
This document recommends provisions for crew safety and survival which are intended to apply to cargo or combination aircraft and equipment.
Viewing 181 to 210 of 1253