Criteria

Text:
Content:
Display:

Results

Viewing 151 to 180 of 1234
CURRENT
2014-07-01
Standard
AIR4362A
This SAE Aerospace Information Report (AIR) provides Nuclear, Biological and Chemical (NBC) protection considerations for environmental control system (ECS) design. It is intended to familiarize the ECS designer with the subject in order to know what information will be required to do an ECS design where NBC protection is a requirement. This is not intended to be a thorough discussion of NBC protection. Such a document would be large and would be classified. Topics of NBC protection that are more pertinent to the ECS designer are discussed in more detail. Those of peripheral interest, but of which the ECS designer should be aware are briefly discussed. Only radiological aspects of nuclear blast are discussed. The term CBR (Chemical, Biological, and Radiological) has been used to contrast with NBC to indicate that only the radiological aspects of a nuclear blast are being discussed.
2014-06-30
WIP Standard
J4004
This SAE Recommended Practice describes how to position and posture the H-point design tool (HPD) described in Appendix B, and how to establish the seating reference point (SgRP), design H-point travel path, and other key reference points that are used in the design and specification of both driver and passenger seat positions. This practice also provides a method for determining the length of the seat track for a driver seat that adjusts fore/aft. The seat track length is based on a desired level of driver accommodation, assuming a U.S. population containing an equal number of male and female drivers. The procedure can be used to establish driver seat track accommodation for new vehicle designs or to evaluate accommodation in existing vehicles. A general method for determining driver seat track length for any driver population (male and female stature distribution) at any selected accommodation percentile and gender mix is given in Appendix A.
2014-06-27
WIP Standard
J2732
This document provides dimension definitions that facilitate geometric quantification and evaluation of seats. This document has been designed for use in CAD, however, many dimensions require establishing HPM position and attitude. Refer to the appropriate document for these procedures. These dimensions are package independent in that they do not require use of the HPM-ll supplemental thigh/leg/shoe. Three types of seat geometry reference points and measurements have been developed. 1. Simple reference points and measurements not related to H-point 2. H-point dependent reference points and measurement that utilize the seat characterization capabilities of the HPM to quantify seat measurements 3. Cross sectional seat trim outlines For convenience and simplicity, many terms associated with H-point devices use human body parts in their name.
CURRENT
2014-06-26
Standard
J1071_201406
This SAE Standard covers the relative position and direction of motion of controls which influence the movement of the machine and the operating direction only of equipment controls. There is no intention to eliminate or restrict the use of combination controls, automatic controls, or special operating controls. Purpose This document is intended as a guide for designing uniform operator controls for graders. Graders are defined in SAE J/ISO 6165.
HISTORICAL
2014-06-25
Standard
J3044_201406
This SAE Recommended Practice describes the test procedures for conducting rear impact occupant restraint and equipment mounting integrity tests for ambulance patient compartment applications. Its purpose is to describe crash pulse characteristics and establish recommended test procedures that will standardize restraint system and equipment mount testing for ambulances. Descriptions of the test set-up, test instrumentation, photographic/video coverage, and the test fixtures are included.
CURRENT
2014-06-24
Standard
AS1304B
This SAE Aerospace Standard (AS) applies to performance and testing of solid chemical oxygen generators which produce oxygen at essentially ambient pressure for use aboard aircraft whose cabin pressure altitude does not exceed 40,000 ft (about 12,200 m). Portable chemical oxygen devices are covered by AS1303.
2014-06-23
WIP Standard
ARP60494
This ARP covers the system design, human interface considerations, and hardware performance recommendations and requirements for touch interactive electronic display systems installed in the cockpit/flight deck for use by pilots. System design and human interface considerations include: identification of functions that could use and benefit from touch interactions, the pilot and cockpit/flight deck environment characteristics that impact usability, and specific pilot interface characteristics such as touch mode, single and multi touch applications, feedback, latency, potential human error, and basic usability. Also addressed are workload, fatigue, and transition from hard to soft control considerations. Hardware issues cover performance aspects of touch screens installed on cockpit/flight deck displays. This ARP is intended to cover Part 23 and 25 category airplanes as well as Part 27 and 29 rotorcraft.
CURRENT
2014-06-20
Standard
ARP8058
This SAE Aerospace Recommended Practice (ARP) provides design guidance and a method for testing thermal performance of airplane in-flight food storage carts. It is noted that thermal performance criteria is not part of AS8056.
2014-06-09
WIP Standard
ARP6331
This document recommends contents for Emergency Medical Kits, including medications and instrumentation, intended for use on passenger-carrying aircraft serviced by at least 1 flight attendant. Recommended practices for carriage of, access to, and maintenance of Emergency Medical Kits are also included.
CURRENT
2014-05-29
Standard
AIR1106B
The scope of this SAE Aerospace Information Report (AIR) is to discuss factors affecting visibility of aircraft navigation and anticollision lights, enabling those concerned with their use to have a better technical understanding of such factors, and to aid in exercising appropriate judgment in the many possible flight eventualities.
2014-05-08
WIP Standard
ARP5932
This SAE Aerospace Recommended Practice (ARP) will provide general guidelines and procedures for servicing and maintaining oxygen systems. Such methods and procedures may be applied to gaseous, liquid, chemical and portable oxygen systems. These guidelines and recommendations will be provided to engineering and maintenance personnel for airlines, modification centers and third party maintenance contractors, to be used while performing maintenance on oxygen systems and components.
CURRENT
2014-05-07
Standard
J3020_201405
This SAE Standard and its supplementary detail specifications cover the engineering requirements for the controlled shot peening of a medical device where shot peening is required for enhancement of a material's mechanical properties through the intentional creation of compressive residual stress.
CURRENT
2014-04-14
Standard
ARP1283B
This SAE Aerospace Recommended Practice (ARP) establishes design guidance and photometric values for adequate cargo compartment and cargo access lighting systems for ground handling. The adoption of a standard set of illuminance values, found appropriate for the performance of the task in specified areas should expedite ground handling.
CURRENT
2014-04-14
Standard
ARP5446A
These recommendations are provided to aid the international air transport industry by identifying a standard, minimum amount of safety instructions that should be given to sight-impaired passengers. This document is not meant to address problems associated with communicating safety information to sight-impaired passengers who are also hearing impaired or non-conversant in the language(s) used by the cabin crew to disseminate general safety information to passengers. Aircraft operators are encouraged to customize the safety instructions for their own operations in order to ensure that required safety information is provided to sight-impaired passengers.
2014-04-03
WIP Standard
ARP6503
This document provides guidance for in-flight rest facilities provided for use by cabin crew on commercial transport aircraft.. This document is applicable to dedicated cabin crew rest facilities. Passenger seats used to provide “cabin crew rest facilities” are not within the scope of this document.
CURRENT
2014-04-03
Standard
ARP5647A
This SAE Aerospace Recommend Practice (ARP) is intended to identify both safety related best practices and unique design considerations of metal halides High Intensity Discharge (HID) lamps and power supplies in aircraft applications.
CURRENT
2014-03-31
Standard
J2972_201403
This Information Report contains a definition of road vehicle hands-free operation. This definition applies to driver inputs to a wireless communications device used for person-to-person wireless communications while driving. This report applies to both original equipment manufacturers’ and aftermarket devices. The definition does not apply to outputs, e.g., visual or haptic feedback, from a communication system or device, regardless of the modality of human-machine interface. It also does not apply to parallel or redundant manual control operating modes.
CURRENT
2014-02-27
Standard
ARP4169B
This SAE Aerospace Recommended Practice (ARP) discusses the desired characteristics of night vision goggle (NVG) filters that can be used with incandescent, electroluminescent (EL) and light emitting diode (LED) light sources to achieve NVG compatible lighting of aerospace crew stations. This document also discusses the parameters that need to be considered when selecting a night vision goggle/daylight viewing (NVG/DV) filter for proper contrast enhancement to achieve readability in daylight. The recommendations set forth in this document are to aid in the design of NVG compatible lighting that will meet the requirements of MIL-L-85762A and MIL-STD-3009.
2014-02-25
WIP Standard
ARP6295
The scope of this document is to provide recommended practices for the development and implementation of competency-based training programs for air carrier pilots. The recommended practices contained within this document are intended primarily for the guidance of passenger and cargo air carriers, and training providers.
CURRENT
2014-02-13
Standard
ARP6467
This SAE Aerospace Recommended Practice (ARP) includes the minimum human factors requirements and recommendations for the flight deck display of data linked Aeronautical Information (AI), specifically Notices to Airmen (NOTAMs). The goal of human factors is to make it easy for users to do things right and hard to do them wrong. The guidance in this ARP supports this goal by defining minimum requirements and recommendations that focus on the text and potential graphics for NOTAMs as well as the human’s interaction with these on the flight deck. In this ARP “flight deck” includes both single pilot flight decks as well as multi-pilot flight decks. The FAA defines NOTAMs1 as any information concerning the establishment, condition, or change in any component of, or hazard to, the National Airspace System.
CURRENT
2014-02-13
Standard
ARP1894B
The scope of this document is to provide a guideline for the preparation of a plan for testing of inservice chemical oxygen generators to confirm their design useful life. The test program should also allow determination with a sufficient level of confidence, whether generators are suitable for further use (i.e., life extension, or if the useful life limit has been reached).
CURRENT
2014-02-01
Standard
HEB1B
This Engineering Bulletin and its annexes provide guidance on the application of Human Engineering principles and practices to the analysis, design, development, testing, fielding, support, accident investigation, and training for military and commercial products throughout their intended life cycles.
2014-01-29
WIP Standard
AIR825/13A
This guide is intended to promote safe designs, operations and maintenance on aircraft and ground support oxygen systems. This is also a summary of some work by the ASTM G 4 Committee related to oxygen fire investigations and design concerns to reduce the risk of an oxygen fire. There have been many recent technological advances and additional test data is available for evaluating and controlling combustion hazards in oxygen equipment. Standards that use this new information are rapidly evolving. A guide is needed to assist organizations and persons not completely familiar with this process to provide oxygen systems with minimum risks of combustion. This guide does not necessarily address all the detailed issues and provide all data that will be needed. For a complete analysis, supplemental publications need to be consulted. This guide does discuss the basics of oxygen systems fire hazards. The hazard analysis process is discussed and a simple example to explain this process.
CURRENT
2014-01-24
Standard
J1834_201401
This SAE Recommended Practice provides design, test, and performance guidelines on the comfort, fit, and convenience for active restraint systems for heavy trucks and multipurpose passenger vehicle applications over 10 000 lbs gross vehicle weight rating (GVWR). The information pertains to the forward facing seating positions.
HISTORICAL
2014-01-14
Standard
AIR1168/4A
This section presents the basic equations for computing ice protection requirements for nontransparent and transparent surfaces and for fog and frost protection of windshields. Simplified graphical presentations suitable for preliminary design and a description of various types of ice, fog, frost, and rain protection systems are also presented.
CURRENT
2014-01-07
Standard
AS18276B
This specification covers the installation of aircraft interior lighting for military aircraft.
CURRENT
2014-01-07
Standard
AIR171E
This document presents a glossary of many of the terms that can be found in literature covering issues related to aviation oxygen systems and associated topics. Such a listing can never be all inclusive but the majority of important terms are anticipated to be included for reference.
CURRENT
2014-01-07
Standard
ARP5029A
This SAE Aerospace Recommended Practice (ARP) provides the user with standardized guidelines for the measurement of effective intensity of strobe anticollision lights for aircraft in the laboratory, in maintenance facilities, and in the field. A common source of traceability for calibration of the measurement systems, compensation for known causes of variation in light output, and recommendations which minimize sources of errors and uncertainties are included in this document. Estimates of uncertainty and error sources for each class of measurement are discussed.
CURRENT
2014-01-07
Standard
AIR512F
This document covers the general recommendations for cabin lighting in order to provide satisfactory illumination for, but not limited to: Boarding and deplaning Movement about the cabin Reading Use of lavatories Use of work areas Using stowage compartments, coat rooms, and closets Using interior stairways and elevators (lifts)
CURRENT
2013-12-17
Standard
J1308_201312
This practice applies to guarding of engine cooling fans used on Off-Road Self-Propelled Work Machines defined in SAE J1116. It does not include guarding for belts, pulleys, or other rotating equipment used on these machines.
Viewing 151 to 180 of 1234