Criteria

Text:
Content:
Display:

Results

Viewing 61 to 90 of 1234
CURRENT
2016-02-24
Standard
J3048_201602
The purpose of this document is to provide guidance for the implementation of driver-vehicle interfaces (DVI) for intervention-type lane keeping assistance systems (LKAS), as defined by ISO 11270. LKAS provide support for safe lane keeping operations by drivers via momentary intervention in lane keeping actions, but do not automate part or all of the dynamic driving task on a sustained basis (see SAE J3016). Thus they are not classified as a driving automation system per SAE J3016 - Taxonomy and Definitions for Terms Related to On-Road Motor Vehicle Automated Driving Systems, nor do they prevent possible lane or roadway departures, as drivers can always override an LKAS intervention and road conditions may be such that they cannot support an LKAS intervention (e.g., too slippery, curve to tight, lateral velocity too high, etc.).
HISTORICAL
2016-02-15
Standard
USCAR25-2
This document describes the design relative to assembly force, and hand clearance guidelines for conventional hand-plug, mechanical assist and twist lock electrical connectors, as well as Connector Position Assurances (CPAs). The minimum values associated with this design guide need to be evaluated against other critical characteristics that impact quality, efficiency and other traits of assembly feasibility. All possible designs and applications could not be anticipated in creating these guidelines. Where there are questions of adherence to this document, such as use of an “off-the-shelf” design, always consult the responsible Ergonomics Department.
2016-02-10
WIP Standard
ARP4927A
This SAE Aerospace Recommended Practice (ARP) provides guidance to achieve the optimum integration of new aircraft systems which have an impact on the cockpit layout or crew operating procedures. This process may also be used for modification of existing cockpits.
2016-02-04
WIP Standard
ARP6378
This document is intended to give guidance to users, regulators and persons in the aviation field who may be affected by the potential hazard of lasers aimed at aircraft by the general public. The potential hazards include startle (distraction, disruption, disorientation, and incapacitation), glare, flashblindness and eye injury. (Some information may also be useful for non-aviation users, such as persons driving vehicles. Additional information can be found in ANSI Z136.6, “Safe Use of Lasers Outdoors”.)
2016-02-03
WIP Standard
ARP6377
Develop and propagate recommended practices for the design, development, testing and implementation of head worn displays in piloted airborne platforms
2016-01-25
WIP Standard
AIR6373
pilots, air traffic controllers, dispatchers, aviation meteorologists
2016-01-18
WIP Standard
ARP4101/8A
This document recommends criteria for standardization of flight deck interior doors and their operation which will provide optimum use under normal and emergency conditions.
2016-01-18
WIP Standard
ARP4102/10B
This document presents criteria for flight deck controls and displays for airborne collision avoidance systems providing vertical-only guidance, and provides design guidance for operational, functional, and installation characteristics and requirements for airborne collision avoidance systems in existing and future aircraft.
2016-01-18
WIP Standard
ARP4102/6A
This document recommends criteria for the control and display of communications and navigation equipment on the flight deck. The equipment includes: a. Communications: Ultra High Frequency (UHF), Very High Frequency (VHF), and High Frequency (HF) Radios, Cabin/Service Interphones, Public Address (PA), Select Call (SELCAL), Call Select (CALSEL), Satellite Communications (SATCOM), b. Navigation: Very High Frequency Omnidirectional Range (VOR), Tactical Air Navigation (TACAN), Automatic Direction Finder (ADF), Distance Measuring Equipment (DME), Instrument Landing System (ILS), Markers (MKR), Omega, Very Low Frequency (VLF), Inertial Navigation Systems (INS), Inertial Reference Systems (IRS), Satellite Navigation (SATNAV), Low Range Radio Altimeter (LRRA).
2016-01-18
WIP Standard
ARP4102/9B
This document recommends criteria and requirements for a Flight Management System (FMS) for transport aircraft. The FMS shall provide the functions of Lateral Navigation, Vertical Navigation, and Performance Management and may include Time of Arrival Control. The FMS design shall take Human Factors considerations into account to produce a fault tolerant system.
2016-01-15
WIP Standard
J2396
This SAE Recommended Practice defines key terms and metrics applied in the analysis of video based driver eye glance behavior. It can be applied in environments from real world trials to laboratory based driving simulator studies evaluating Transport Information and Control Systems (TICS). The procedures described in this document could also apply to more general assessments of driver visual behavior in the absence of TICS or other advanced display and control systems associated with Intelligent Transportation Systems (ITS). Driver workload studies, design of traffic control devices and roadways, modality interference from use of cell phones, mirror redesign, situational awareness, and the effects of driver stress from sleep loss and trip delays are just a few of the studies that would benefit from a standard practice for measuring visual allocation.
CURRENT
2016-01-14
Standard
J2292_201601
This SAE Recommended Practice establishes minimum performance and test requirements for combination pelvic and upper torso occupant restraint systems provided for off-road self-propelled work machines.
CURRENT
2016-01-06
Standard
J3047_201601
This recommended practice will promote a temperature and duration guideline that mitigates the risk of thermal injuries to the heated seat user. In addition, recommendations are established to indicate to the user when the heater is operating, and warnings that should be included in the vehicle literature.
2016-01-03
WIP Standard
ARP5572A
This SAE Aerospace Recommended Practice (ARP) provides information and guidance for the control of hazardous laser energy in the navigable airspace. This document provides guidance to all laser proponents and the FAA on the optimal use of control measures during propagation of a laser beam in the navigable airspace. This document does not cover control measures already set for in federal, state, and local regulations for the safe operations of lasers. FAA will review control measures in their aeronautical study of proposed outdoor laser operations. The purpose of this document is to establish a recommended practice for controlling laser systems to ensure the safe co-existence of aircraft operations and various types of laser activities. This document describes means for mitigating hazards related to laser beam propagation in the navigable airspace.
2016-01-03
WIP Standard
ARP5293A
This document applies to laser proponents involved with the use of laser systems outdoors. It may be used in conjunction with AS4970, ARP5535, and ARP5572 and the ANSI Z136 series of laser safety standards.
CURRENT
2016-01-02
Standard
AS6030A
This Common Interface Control Plan (CICP) establishes the methodology for developing, controlling, and managing the technical interfaces between and within systems. An interface defines the interaction at a defined point between entities to achieve a combined system capability. A common interface defines the shared interaction between multiple systems on either side of the interface. The document is not intended to directly control any other aspects of program management, such as matters of contractual, financial, or those of an intellectual property rights nature. Members in the interface control process include: procurement authorities, design authorities, and other related agencies as defined in the specific System Interface Control Plan (SICP). For the purposes of this plan, only the terms Procuring Organization and Producing Organization will be used.
2015-12-31
WIP Standard
J670
The vehicle dynamics terminology presented herein pertains to passenger cars and light trucks with two axles and to those vehicles pulling single-axle trailers. The terminology presents symbols and definitions covering the following subjects: axis systems, vehicle bodies, suspension and steering systems, brakes, tires and wheels, operating states and modes, control and disturbance inputs, vehicle responses, and vehicle characterizing descriptors. The scope does not include terms relating to the human perception of vehicle response.
CURRENT
2015-12-19
Standard
AS5725B
This standard defines implementation requirements for the electrical interface between: aircraft carried miniature store carriage systems and miniature stores aircraft parent carriage and miniature stores surface based launch systems and miniature stores The interface provides a common interfacing capability for the initialization and employment of smart miniature munitions and other miniature stores from the host systems. Physical, electrical, and logical (functional) aspects of the interface are addressed.
2015-12-07
WIP Standard
AS6371
This Aerospace Standard will provide the basis for a certification approach and contain the methods or criteria for verification of performance required for Oxygen Dispensing Units to be used by Cabin Crew up to 25,000 ft. cabin altitude.
2015-12-03
WIP Standard
J1757-2
Set-up a consistent geometry and requirements for measuring the Vehicles HUD, covering the AR-HUD performance.
CURRENT
2015-12-03
Standard
J3077_201512
This document provides a summary of the activities to-date of Task Force #1 - Research Foundations – of the SAE’s Driver Vehicle Interface (DVI) committee. More specifically, it establishes working definitions of key DVI concepts, as well as an extensive list of data sources relevant to DVI design and the larger topic of driver distraction.
2015-11-30
WIP Standard
ARP6527
The scope of this document is to provide guidance concerning the use of oxygen when flying into and out of high elevation airports. Normally for aircraft operations that fly at high altitude, oxygen requirements involving a decompression are generally easy to understand and follow because of the increased delta between cabin and ambient pressures. This document is intended to address a transition zone where cabin and ambient pressures are closely the same and oxygen usage can be compounded by physiologic subjectivity that often accompanies hypoxia. This transition zone is further diluted by regulations which are based not on science but rather sociological mores often not supported by empirical science. An example of this is reflected by differential regulatory requirements between CFR’s 91, 121 and 135. Operators who fly into these high altitude airports will undoubtedly be required to address the inherent threats and errors associated with this transition zone.
CURRENT
2015-11-24
Standard
J1038_201511
This SAE Recommended Practice establishes the test procedures, performance requirements, and criteria necessary to evaluate minimum safety and reliability requirements of a children's snowmobile as identified in 1.2.
HISTORICAL
2015-10-21
Standard
J3047_201510
This recommended practice will promote a temperature and duration guideline that mitigates the risk of thermal injuries to the heated seat user. In addition, recommendations are established to indicate to the user when the heater is operating, and warnings that should be included in the vehicle literature.
CURRENT
2015-10-08
Standard
J3078/6_201510
SAE J3078/6 specifies a test method for simulating solar heating in the laboratory and measuring the radiant heat energy from a natural or simulated source. It is applicable to Off-Road Self-Propelled Work Machines as defined in SAE J1116 and Agricultural Tractors as defined in ANSI/ASAE S390.
2015-10-07
WIP Standard
J3113
SAE Jxxxx provides principles and a process for developing icons for use in electronic displays related to Off Road Work Machines as stated defined in SAE J 1116. Following the process insures that icons are derived from ISO registered graphical symbols or ISO compliant non-registered graphical symbols.
2015-10-05
WIP Standard
AS8047A
This aerospace standard (AS) defines the requirements of portable protective breathing equipment for use during smoke/fire conditions on board an aircraft.
2015-09-29
WIP Standard
J386
This standard provides performance and test requirements for operator restraint systems provided for off-road self-propelled work machines. This document applies to pelvic restraint systems (Type 1) for off-road, self-propelled work machines fitted with ROPS and commonly used in construction, earthmoving, forestry, and mining as referred to in SAE J1040 and industrial machines fitted with ROPS as referred to in SAE J1042.
2015-09-22
WIP Standard
AIR6256
The aim of this document is to provide a comprehensive synopsis of regulations applicable to aircraft oxygen systems. The context of physiological requirements, international regulations, operational requirements and airworthiness standards is shown to understand the role of aircraft oxygen systems and to demonstrate under which circumstances is needed on aircraft. With regards to National Aviation Regulations States are committed to the Convention on International Aviation (Chicago Convention). The majority of states have adopted, with some deviations, FAA and EASA systems including operational and airworthiness requirements. Accordingly the extent of this document is primarily focused on FAA/EASA requirements.
2015-09-18
WIP Standard
J2395
This SAE Recommended Practice applies to both Original Equipment Manufacturer (OEM) and aftermarket ITS message-generating systems for passenger vehicles and heavy trucks. The recommended practice describes the method for prioritizing ITS in-vehicle messages and/or displayed information based on a defined set of criteria. Each criterion has a fixed number of levels that are used to rate/rank a given message or information item to determine its prioritization value. The prioritization value is used to determine the priority in which simultaneous, or overlapping, in-vehicle messages are presented to the driver.
Viewing 61 to 90 of 1234