Criteria

Text:
Content:
Display:

Results

Viewing 1 to 15 of 15
2017-09-28
Magazine
Advances for off-highway engine design As manufacturers continue to drive out cost and meet a worldwide patchwork of regulatory frameworks, the tools for developing those engines are advancing. From showcase prototypes to advanced analytical techniques, suppliers are helping the cause. Military vehicles battle for autonomy at lower cost Engineers are adding sensors, more powerful micros and faster networks as they automate tasks and pave the way to autonomy. Heavy duty lightweighting Optimization of tractor-trailer systems and component design helps to reduce overall vehicle mass, a key strategy in improving fuel economy and meeting upcoming Phase 2 GHG regulations. Navistar's SuperTruck II explores composites, WiFi to cut weight Methane state of mind New Holland ramps up its focus on alternative fuels, showcasing a methane-powered concept tractor that trims emissions, operating costs.
2017-04-06
Magazine
Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2016-10-07
Magazine
The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2015-10-07
Magazine
HMIs extend beyond the cab Telematics functions are being integrated into multi-function user interfaces. Standards step forward in design of off-highway electronics Functional safety standards are starting to impact many development projects, while the auto industry's AUTOSAR standard is being deployed to help enable software reuse and simplify designs. Leveraging automotive lightweighting techniques to improve off-highway emissions Where systems engineers can gain efficiencies in off-highway equipment is agnostic, they'll take it anywhere, and so they should, but one of the ways, often underestimated, is through the use of strong and lightweight advanced materials. Waste heat recovery for the long haul A WHR system based on an organic Rankine cycle has been developed for a long-haul Iveco Stralis truck.
2014-10-02
Magazine
QT steels make an impact The use of quenchd and tempered steels for dumper bodies reduces weight and fuel consumption while increasing payload capacity and wear life.
2014-09-04
Magazine
Putting lightweighting to the test Material laws and orientation information are coupled in a single finite element analysis to predict the performance of the hybrid composite beam under a dynamic three point bending load. Screens, cameras provide new look in cabs Video inputs are another option showing up on displays that increasingly offer touch control. Big performance in small packages By regulating light-duty engine variable speed fans based on heat rejection demands and ambient temperature, consistent power savings over the entire operating spectrum can be achieved.
2013-09-05
Magazine
Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks Small engine landscape Kubota engineers developed new small-displacement engines that adopt a common-rail system while optimizing the combustion system and injection characteristics. Sensitive to safety A growing number of digital sensors are among the tools being used to make sure failures are rare and injuries are even more infrequent.
2012-11-08
Magazine
Biofuel opportunities and pitfalls Annual growth in biofuels has been strong but is expected to slow in the near future. User interfaces going mainstream Off-highway HMIs use consumer technologies to add functions, simplify tasks. Reducing the environmental impact of hydraulic systems OEMS and their suppliers are creating new hydraulic systems and components, using new fluids and remanufacturing to save energy and reduce the environmental impact of off-highway equipment. Multiple controllers add to EV complexity Model-based design has revolutionized the way products are developed, with design shifting from parts to the whole.
2012-07-26
Magazine
Quiet in the cab As NVH gains importance in the quality of off-highway machines' performance and operator comfort, it is essential to understand every aspect of the machine noises and its annoyance effect to the operator's comfort.
2012-02-02
Magazine
Easy to control Designers grab a range of technologies to create controls that are simpler for operators to use. Designing quiet off-highway equipment OEMs and suppliers are using new materials and innovative designs to reduce NVH for both vehicle operators and the environment. Using FEA in off-highway design The process of considering weld redundancy in virtual simulation is a complex way of ensuring that weldment design is robust enough to prevail over accidental weld redundancy that might occur during manufacturing. Efficient and effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, begins term as chief elective officer of SAE International. Making battlefield targets disappear The use of 'smart' special materials has the potential to radically alter the way military platforms are defended, and used.
2007-03-01
Magazine
Putting tractors to the test Southwest Research Institute offers manufacturers a ready-made R&D laboratory and the test programs to push their machines to the limit. Leave the driving to us Military programs explore autonomy to lighten operator workloads. Easy on the operator Off-highway OEMs and suppliers want to make life as easy-and productive- as possible for the people running the equipment. Tough testing for tomorrow's demands The off-highway industry is moving toward a new era of legislation and environmental pressures, making test centers increasingly important.
2004-02-01
Magazine
heavy-duty visions MTU and DDC devoted engineers toward the development of engine technology for future military-vehicle applications. Smooth operation The interface between man and the machine can be made more comfortable, not to mention more productive, via the use of electronics. History of gerotor hydraulics The first part in a retrospective of the development of gerotor technology, the engineers behind the breakthroughs, and an acquisition here and there. Advances in fuel injection Engineers from Delphi address drive-circuit modeling and analysis of electronically controlled fuel injectors for heavy-duty diesel engines. CAE in hydraulics Analysis solves problems dealing with NVH and complicated dynamics inherent in check-valve design, development, and organization.
Viewing 1 to 15 of 15

    Filter

    • Magazine
      15