Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 76
CURRENT
2017-08-14
Standard
AMS2376E
This specification covers procedures for approval of premium quality forgings, usually serialized, the stock from which such forgings are produced, and the controls to be exercised in producing the forgings and forging stock.
CURRENT
2017-08-10
Standard
AMS5540P
This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, and plate up to 2 inches (50.8 mm), inclusive, in nominal thickness (see 8.4).
CURRENT
2017-07-20
Standard
AMS5951A
This specification covers a corrosion and heat-resistant nickel based alloy in the form of sheet, strip, and plate 0.020 to 1.0 inch (0.508 to 25.4 mm) in thickness (see 8.5).
CURRENT
2017-06-22
Standard
AMS5568H
This specification covers a corrosion and heat resistant steel in the form of welded tubing.
CURRENT
2017-06-13
Standard
AMS5826E
This specification covers a corrosion and heat-resistant steel in the form of welding wire.
CURRENT
2017-06-13
Standard
AMS5707N
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, 3.25 inches (82.6 mm) and under and stock of any size for forging and for flash welded rings. (see 8.5).
CURRENT
2017-06-05
Standard
AMS5802E
This specification covers a corrosion and heat-resistant iron-nickel alloy in the form of welding wire.
CURRENT
2017-05-01
Standard
AS44725AR-2
No Scope available.
CURRENT
2017-04-20
Standard
AMS5530H
This specification covers a corrosion and heat resistant nickel alloy in the form of sheet, strip, and plate.
CURRENT
2017-04-18
Standard
AMS5389D
This specification covers a corrosion and heat resistant nickel alloy in the form of sand castings.
CURRENT
2017-04-06
Standard
AMS7724D
This specification covers a corrosion and heat resistant iron alloy sintered wire mesh in the form of sheet and strip.
CURRENT
2017-04-06
Standard
AMS5751F
This specification covers a corrosion and heat resistant nickel alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
CURRENT
2017-04-06
Standard
AMS5373E
This specification covers a corrosion and heat resistant cobalt alloy in the form of sand castings.
CURRENT
2017-04-05
Standard
AMS5750D
This specification covers a corrosion and heat resistant nickel-base alloy in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
CURRENT
2017-04-05
Standard
AMS5546E
This specification covers a corrosion and moderate heat resistant steel in the form of sheet and strip.
CURRENT
2017-04-05
Standard
AMS4222H
This specification covers an aluminum alloy in the form of sand castings.
CURRENT
2017-04-05
Standard
AMS5657D
Primarily for parts requiring high strength and oxidation resistance up to 700 F, and where such parts may require welding during fabrication.
CURRENT
2017-04-04
Standard
AMS5363F
This specification covers a corrosion and heat resistant steel in the form of sand or centrifugal castings.
CURRENT
2017-04-04
Standard
AMS5795G
This specification covers a corrosion and heat resistant iron alloy in the form of covered welding electrodes.
CURRENT
2017-04-04
Standard
AMS5351G
This specification covers a corrosion and moderate heat resistant steel in the form of sand castings.
CURRENT
2017-04-04
Standard
AMS5644E
Primarily for parts requiring corrosion resistance and high strength up to 600 F (315 C), and when such parts may require welding during fabrication.
CURRENT
2017-04-03
Standard
AMS5683G
This specification covers a corrosion and heat resistant nickel alloy in the form of welding wire.
CURRENT
2017-04-03
Standard
AMS5691H
This specification covers a corrosion and heat resistant steel in the form of covered welding electrodes. Primarily for shielded-metal-arc welding of parts fabricated from steels of similar composition, particularly when the weld zone is required to have strength and corrosion-resistance comparable to those of the parent metal.
CURRENT
2017-04-03
Standard
AMS5550F
This specification covers a corrosion and heat resistant nickel alloy in the form of sheet and strip.
CURRENT
2017-02-21
Standard
AS4536C
This procurement specification covers aerospace quality safety cable kits consisting of safety cables and ferrules made from the same corrosion and heat resistant steels and a nickel base alloy of the type identified under the Unified Numbering system as follows: UNS S30400 - Corrosion resistant steel (AMS5697) UNS S32100 - Corrosion and heat resistant steel (AMS5689) UNS N06600 - Nickel base alloy (AMS5687) UNS N06625 - Nickel Alloy, Corrosion Resistant (AMS5666) The requirements for installation practices are also specified.
Viewing 1 to 30 of 76

Filter

  • Standard
    76