Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 51
2017-08-02
WIP Standard
AS6065
Portable and Stationary Snowmelters with a melting capacity ranging from 20 to 500 tons of snow per hour. The Portable Snowmelters operate on diesel or Jet A fuel, the Stationary Snowmelters operate on natural gas, diesel or Jet A fuel.
2017-08-02
WIP Standard
AS6138
Create a technical specification that can be used as a minimum requirement, by airports when purchasing and using this type of equipment.
2017-08-02
WIP Standard
ARP5559
This Aerospace Recommended Practice covers various requirements for Airport runway deicers, to be used with various carrier vehicles primarily used to treat the runway surface with an even coating of deicer fluids. It does not apply to non-airport snow and ice removal equipment such as highway plows or construction/farm machinery.
2017-04-18
WIP Standard
AIR7487
Provide an interactive tool that will provide snow and ice control professionals with an ability to estimate the number and type of equipment needed to meet the service levels they deem appropriate to their airline community, airport passengers, regional commitment and operational strategy.
CURRENT
2015-09-07
Standard
ARP5533A
This SAE Aerospace Recommended Practice (ARP) covers the requirements for a Stationary Runway Weather Information System (referred to as the system) to monitor the surface conditions of airfield operational areas to ensure safer ground operations of aircraft. The system provides (1) temperature and condition information of runway, taxiway, and ramp pavements and (2) atmospheric weather conditions that assist airport personnel to maintain safer and more efficient airport operations. The system can be either a wired system or a wireless system.
CURRENT
2014-09-05
Standard
ARP5548
This equipment specification covers requirements for Multi-Tasking Equipment (MTE) for airfield snow removal purposes. The unit shall include a combination of a carrier vehicle, snow plow, rotary broom and high velocity air blast system. This vehicle as a unit shall be an integrated snow plow, rotary broom and high velocity air blast. Primary application is for the high-speed plowing, sweeping and cleaning of ice and snow from airfield operational areas such as runways, taxiways and ramp aprons. The term carrier vehicle represents the various self-propelled prime movers that provide the motive power necessary to move snow and ice control equipment during winter operations. The airport operator may require this specified piece of equipment in order to maintain the airfield during large and small snow events. When necessary, the MTE shall be a central and critical element in the winter pavement maintenance fleet in the effort to accomplish the airport’s published snow plan.
CURRENT
2014-03-25
Standard
AS4041B
This SAE Aerospace Standard (AS) establishes the basic requirements for the design, construction and testing of air mode 2.44 m × 2.44 m (8 ft × 8 ft) cross-section containers. These containers are to be used exclusively in conjunction with the air mode in freighter versions of wide-body commercial transport aircraft. Air mode containers will normally be on aircraft roller conveying systems and/or on similarly equipped ancillary ground handling devices. Similar requirements for air/surface (intermodal) containers are provided in AS832.
CURRENT
2014-03-25
Standard
AS1825C
The scope of this SAE Aerospace Standard (AS) shall cover the methodology of defining and determining the "internal volumes" of both the main deck and lower deck aircraft cargo compartments. The minimum required clearance between the compartment envelope and the unit load devices (ULDs) shall also be stated in order to provide the maximum ULD external contour and the methodology to define the ULD internal volumes.
CURRENT
2014-03-25
Standard
AS832G
This SAE Aerospace Standard (AS) establishes the basic requirements for the specification and testing of air surface (intermodal) 8 ft × 8 ft (2.44 m × 2.44 m) cross-section containers. The basic requirements for the air/surface (intermodal) container are presented in Sections 3 to 6 while the detailed design requirements are in Appendix A. Appendix B describes the sections of other standards that apply to air/surface containers. Appendix C describes uniformity of test apparatus and methods. These appendices shall be referred to for important supplemental requirements and procedures for this document. AS4041 presents the requirements for air mode general purpose containers. Requirements for containers to be transported by rotary-wing aircraft are excluded from this document. NOTE: The essential basic and detail criteria are identified by use of the key word "shall."
CURRENT
2014-03-25
Standard
ARP1523C
This SAE Aerospace Recommended Practice (ARP) delineates the minimum operational requirements that will ensure that perishable cargoes in insulated standard airborne containers are kept in prime condition during the ground handling and air transportation cycle for a maximum period of 36 h.
CURRENT
2014-03-25
Standard
AIR4899A
The methodology for maximum package size loading is based on a mathematical method allowing the calculation of maximum package size tables. This method does not in principal differentiate between bulk loading and cargo system loading. However, some restrictions have to be considered: Some cargo systems generate pre-determined pallet trajectories. Envelope curves depending on the pallet size and the possible trajectories have to be determined first. Door geometric limitations (with or without cargo loading system) Turning limitations due to weight, load geometry and conveyance capability Securing requirements This document is not intended for airline operational use. It should be used by engineers performing calculations or developing computer programs to produce Maximum Package Size tables specified in AS1825.
CURRENT
2013-09-10
Standard
AS1875A
This SAE Aerospace Standard (AS) presents all appropriate boss dimensions from .125 inch to 2.0 inch tube sizes.
CURRENT
2013-07-09
Standard
ARP6059
This equipment recommended practice defines the requirements for a permanent vehicle-mounted or slip-in accessory device designed to transport and distribute aggregate de-icing, anti-icing, or friction modifying solid materials or wetted solid materials onto runways, taxiways, ramp, and terminal areas and other paved surfaces on an airport. It is not intended for liquid material spreaders which are addressed in ARP5559. The material spreader may be permanently mounted on a carrier vehicle, trailer, or semi-trailer, or temporarily installed on a carrier vehicle trailer, or semi-trailer for seasonal use only. The carrier vehicle may be dedicated to material spreading applications only, or provide additional functions such as a plow vehicle, flat bed or dump body. Carrier vehicles are self-propelled prime movers, generally a commercial or purpose-built truck that provides the mobility to move the material spreader on these paved surfaces.
CURRENT
2013-02-24
Standard
ARP5623
This SAE Aerospace Recommended Practice (ARP) covers the requirements for a combined Mobile Digital Infrared Pavement Surface, Ambient Air, and Dew Point Temperature Sensing System (referred to as the system). The system monitors real-time surface, air and dew point temperatures of airfield pavement areas to ensure safe winter ground operations of aircraft and other vehicles. The vehicle mounted electronic system provides the operator with real-time readings of surface, air and dew point temperatures of airfield pavement areas including runways, taxiways, ramps, bridges, vehicular roadways, parking garages and parking lots. The electronic system shall be available with or without the dew point sensing option. This electronic system can be utilized as a stand alone system at small airports, or may be used to augment airport operations that currently have a Stationary Runway Weather Information System (reference ARP5533).
CURRENT
2012-01-06
Standard
J1309_201201
This SAE Standard describes a uniform method to calculate and specify travel performance characteristics of hydraulic excavators, material handlers, knuckle boom log loaders, delimbers, feller bunchers, harvesters, processors, and other knuckle boom material handlers. It establishes definitions and specifies machine conditions for calculations and tests. This document applies to crawler mounted machines such as hydraulic excavators as defined in SAE J/ISO 6165 and ISO 7135, and knuckle boom log loaders as defined in SAE J1209 and SAE J2055. This document also applies to certain forestry equipment defined in SAE J1209 and ISO 6814 that have crawler mountings such as delimbers, feller bunchers, harvesters, and processors. Included in the definition of hydraulic excavators are also front shovel, clamshell, and telescoping boom excavators.
CURRENT
2011-10-27
Standard
J873_201110
This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J/ISO 6165 and J1116. Drag force is measured as a function of travel speed.
CURRENT
2011-08-10
Standard
ARP86C
These recommendations are written to cover the subject of engine exhaust gas to air type heat exchangers under the following classifications:
CURRENT
2010-12-07
Standard
ARP5564
This aerospace recommended practice provides definition for Airport Runway Brooms and covers requirements for various configurations of runway brooms with and without a carrier vehicle. Runway brooms are primarily used to move and clear snow and ice down to bare pavement on airport operational areas such as runways, taxiways and ramp areas. The term carrier vehicle represents the various self-propelled prime movers that provide the forward motion of the various configurations of runway brooms.
2009-09-16
WIP Standard
J2069
This SAE Recommended Practice is intended to provide guidelines to the vehicle manufacturer for applying recovery attachment points on vehicles rated up to 7000 lb GVW, such as passenger cars, vans, and light trucks.
HISTORICAL
2007-05-07
Standard
J873_200705
This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J/ISO 6165 and J1116. Drag force is measured as a function of travel speed.
CURRENT
2006-05-19
Standard
ARP5943
This SAE Aerospace Recommended Practice (ARP) covers various requirements for airport runway plows, ramp plows, wings, and hitches to be used with various carrier vehicles primarily used to cast snow away from airport airside operational areas, such as runways, ramps, and taxiways. It does not apply to plows and hitches for non-airport snow removal equipment such as highway plows or construction/farm machinery.
CURRENT
2005-07-11
Standard
ARP5539
This SAE Aerospace Recommended Practice (ARP) covers requirements for a rotary plow with carrier vehicle primarily used to cast heavy concentrations of snow away from airport operational areas such as runways and taxiways. The term carrier vehicle represents the various self-propelled prime movers that provide the power necessary to move snow and ice control equipment during winter operations.
HISTORICAL
2005-02-16
Standard
ARP5533
This SAE Aerospace Recommended Practice (ARP) covers the requirements for a Stationary Runway Weather Information System (referred to as the system) to monitor the surface conditions of airfield operational areas to ensure safer ground operations of aircraft. The system provides (1) temperature and condition information of runway, taxiway, and ramp pavements and (2) atmospheric weather conditions that assist airport personnel to maintain safer and more efficient airport operations. The system can be either a wired system or a wireless system.
HISTORICAL
2003-09-30
Standard
J873_200309
This SAE Standard establishes a test method to measure drag force of self-propelled, as well as towed, construction, forestry, and industrial machines, with or without payload, as listed in SAE J/ISO 6165 and J1116. Drag force is measured as a function of travel speed.
CURRENT
2003-05-12
Standard
J897_200305
This SAE Standard applies to off-road self-propelled construction, forestry and industrial machines as listed in categories 1, 2, and 4 of SAE J1116. Purpose This Standard provides a field procedure to determine the ability of a machine to operate statically and dynamically on sloping surfaces. Depending upon the objective of the test, any item listed as specified is to be selected at the discretion of either the manufacturer, the test agency, the owner, or a combination of these parties.
CURRENT
2003-05-08
Standard
J872_200305
This SAE Standard specifies a test method to measure the drawbar pull performance of self-propelled construction, forestry, and industrial machines and their combinations with mounted and/or trailed equipment, with or without payload, as listed in SAE J1116. It covers the following criteria measured against travel speed: drawbar pull, drawbar power, and wheel or track slip.
HISTORICAL
2003-04-24
Standard
J1309_200304
This SAE Standard describes a uniform method to calculate and specify travel performance characteristics of hydraulic excavators, material handlers, knuckle boom log loaders, delimbers, feller bunchers, harvesters, processors, and other knuckle boom material handlers. It establishes definitions and specifies machine conditions for calculations and tests. This document applies to crawler mounted machines such as hydraulic excavators as defined in SAE J/ISO 6165 and ISO 7135, and knuckle boom log loaders as defined in SAE J1209 and SAE J2055. This document also applies to certain forestry equipment defined in SAE J1209 and ISO 6814 that have crawler mountings such as delimbers, feller bunchers, harvesters, and processors. Included in the definition of hydraulic excavators are also front shovel, clamshell, and telescoping boom excavators.
CURRENT
2002-02-22
Standard
J2539_200202
This SAE Information Report provides a comparative summary between the various messages found in the SAE ATIS standards work (notably SAE J2313, J2353, J2354, J2369 and J2374) and that found in the GATS standard (Global Automotive Telematics Standard). GATS is a message set meant to be deployed on mobile phone systems based on the GSM (Global System for Mobile Communication) phone system which is being deployed in European markets and which the SAE may need to harmonize with as part of the World Standards activities of TC204. This document provides an overview of the various types of supported messages and how they compare with US terms and messages. Some selected features of the GATS work are recommended for assimilation into the next revision of ATIS standards. No attempt at determining a U.S. policy in this regard is provided. This document seeks to provide the reader familiar with SAE ATIS with a high level overview of technical knowledge of the GATS approach in similar areas.
CURRENT
2001-02-01
Standard
J2069_200102
This SAE Recommended Practice is intended to provide guidelines to the vehicle manufacturer for applying recovery attachment points on vehicles rated up to 3178 kg (7000 lb) GVW, such as passenger cars, vans, and light trucks.
CURRENT
1999-08-01
Standard
AIR5387
This SAE Aerospace Information Report (AIR) is intended to cover all airport 50 or 60 Hz electrical systems as well as all electrical utilization equipment that is attached to those systems.
Viewing 1 to 30 of 51

Filter

  • Standard
    51