Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 101
2017-11-30
Magazine
Meeting truck autonomy hurdles head-on Combining sensors, inter-vehicle communications and controllers poses major challenges in the effort to bring greater levels of automation to commercial trucking. Simulation key to additive manufacturing analysis Advanced simulation tools help to optimize 3D printing processes before physical build. Making the case for battery-electric fleet power Battery systems edge closer to a tipping point as commercial and heavy-duty fleets broaden their application. Electrified forklifts go big Hoist Liftruck brings full electrification to some of the biggest forklift trucks, motivated only in part by regulatory pressures.
2017-09-28
Magazine
Advances for off-highway engine design As manufacturers continue to drive out cost and meet a worldwide patchwork of regulatory frameworks, the tools for developing those engines are advancing. From showcase prototypes to advanced analytical techniques, suppliers are helping the cause. Military vehicles battle for autonomy at lower cost Engineers are adding sensors, more powerful micros and faster networks as they automate tasks and pave the way to autonomy. Heavy duty lightweighting Optimization of tractor-trailer systems and component design helps to reduce overall vehicle mass, a key strategy in improving fuel economy and meeting upcoming Phase 2 GHG regulations. Navistar's SuperTruck II explores composites, WiFi to cut weight Methane state of mind New Holland ramps up its focus on alternative fuels, showcasing a methane-powered concept tractor that trims emissions, operating costs.
2017-08-04
Magazine
Opposed-piston engines: the powerplant of the future India's dream of an all-EV fleet by 2030: Myth, miracle, or reality? An approach for prediction of motorcycle engine noise under combustion load Innovations for lightweighting Tough U.S. fuel-economy bogies for 2021 and beyond are driving new approaches for materials, as seen in these examples. More intelligence equals more efficiency, enhanced functionality Advanced electronic systems require renewed focus on architectures, processors, sensors and networks. Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will drive vehicle development in the near future, say industry experts attending the revamped SAE COMVEC 17 event.
2017-08-03
Magazine
Collaborating on diesel emission control Stringent fuel-efficiency and criteria-pollutant standards call for new combustion strategies. The SwRI-led Advanced Combustion Catalyst and Aftertreatment Technologies consortium reinvents existing technologies and experiments with new catalysts to meet standards. More intelligence equals more efficiency, enhanced functionality Advanced systems require renewed focus on architectures, processors, sensors and networks. Appraising the potential for platooning in the U.S. Researchers from the National Renewable Energy Laboratory perform statistical analysis based on a large collection of real-world U.S. truck usage data to estimate the fraction of total miles that are technically suitable for platooning. Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will largely drive vehicle developments in the coming years, according to experts presenting at the revamped SAE COMVEC 17.
2017-07-27
Magazine
The Rapid Rise of Beryllium-Aluminum Alloys in Aerospace Aeroacoustic Simulation Delivers Breakthroughs in Aircraft Noise Reduction Using System Simulation to Manage Increasing Thermal Loads on Aircraft Fuel Systems Ensuring the Compliance of Avionics Software with DO-178C Microwave Photonic Notch Filter Helps Ensure Critical Mission Success Measuring Propellant Stress Relaxation Modulus Using Dynamic Mechanical Analyzer New testing technique requires less material, gives more accurate results. Combustion Characteristics of Hydrocarbon Droplets Induced by Photoignition of Aluminum Nanoparticles Test methodology allows analysis of combustion dynamics for subscale rocket injectors under super critical conditions. Vapor Pressure Data and Analysis for Selected Organophosphorous Compounds: DIBMP, DCMP, IMMP, IMPA, EMPA, and MPFA Determining the thermophysical properties of chemical warfare agent simulants can help evaluate the performance of defensive equipment.
2017-06-01
Magazine
Executive Viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Alternative power and connectivity top of mind Using power dense flywheel hybrid technology to cut fuel consumption of OH equipment IoT connections transform manufacturing, vehicle validation Annual Product Guide Supplier Directory Complete listing of industry suppliers categorized by technology area.
2017-05-05
Magazine
Alternative fuels and challenges Automotive powertrain development: virtually-connected hardware co-simulation Functional Safety-progressing towards safer mobility Electric rockets and the future of satellite propulsion Achates powers toward production A potential ICE game-changer, the Achates OP engine is being tooled up for production at one OEM while a new 2.7-L triple for light-truck demonstrations enters the build phase. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2017-04-06
Magazine
Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2017-02-03
Magazine
A greener future for two-wheelers New BS VI emissions standards for two-wheelers are an enviro-opportunity. Additive manufacturing How 3D printing will transform the A&D support chain. Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Advances in lightweight electronics protection Conformal coatings increase reliability of aerospace and military assemblies.
2016-12-02
Magazine
Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2016-10-07
Magazine
The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.
2016-05-17
Magazine
Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.
2016-04-08
Magazine
Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2016-02-01
Magazine
Stanford goes solar down under Team takes sixth place in Bridgestone World Solar Challenge to cap a rigorous two-year design and development program. Taking the lead Being in charge of an SAE Student Chapter entails everything from organizing meetings to issuing 'nastygrams.' A winning video from a winning Collegiate Design Series team The defending champion of the Formula SAE Michigan competition, Oregon State University, has found another way to win. SAE U.K. Section co-hosts lecture series 'starring' NASA engineer/expert Dr. Ravi Margasahayam of NASA is the engineer responsible for ensuring payload safety for the Space Shuttle and the International Space Station.
2015-12-02
Magazine
Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
2015-08-18
Magazine
The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
2015-08-05
Magazine
Making sense of autonomy Industry offers a range of sensors that will free humans from many tasks while also improving reliability, though devising strategies that meet demanding requirements without breaking the bank is no easy challenge. Life-cycle planning-Design and calibration for ultimate efficiency The ultimate power of Big Data technologies relies on the implementation of new strategies. Unlike a traditional engine calibration process, in which only calibration test data and model simulation data are used, multiple source data introduced into the adaptive engine calibration process contributes to efficiency and cost reduction. The complicated future of off-highway engines Developing an optimum engine is getting tricky now that the European Union has established a Stage V for off-highway engines, and the U.S. has not. What effect will this have on future engine designs?
2015-06-03
Magazine
Executive Viewpoints Off-highway industry executives from companies such as BorgWarner, Perkins, Cummins, and Danfoss reflect upon challenges inside, and outside, the industry, and what technologies, innovations, and strategies will need to be implemented to thrive into the long-term future. 16th Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2015-04-08
Magazine
Hydraulics still in control of off-highway needs Engineers continue to master electronic controllers and software to help systems manage engine speeds and boost efficiency, to the ultimate benefit of both OEMs and end-users. Off-highway calibration challenges-big and complex As the final set of Tier 4 regulations kick in for engines greater than 750 hp (560 kW), calibration efforts must contend with complex engine and aftertreatment systems. Engine manufacturers and service providers deal with this complexity, but does it need to be so? DEF delivery modelling for SCR systems Researchers characterize a 0-D model of a urea delivery module, oriented to model-based control and to the simulation of the system response to fault injections finalized to diagnosis validation.
2014-04-03
Magazine
Making sense of hybrids Developers focus on applications that boost productivity while they strive to improve the efficiency of alternative power sources.
2014-03-01
Magazine
The future for electric and hybrid vehicles in India Technical and political challenges alike have held back the electric and hybrid market, but there are signs of hope. Flex-fuel snowmobile challenge results in improved efficiency and lower emissions Noise and exhaust emissions of recreational snowmobiles have come under increased scrutiny by the U.S. federal government. Students from Kettering University take on the design challenges of meeting or exceeding such regulations. Actuator dynamics in a dual clutch transmission The emergence of tougher environmental and fuel efficient legislations have triggered exploration and advance toward new and better vehicle transmission technologies.
2014-01-16
Magazine
Tighter communications help OEMs meet tighter regulations Closer links between powertrains and hydraulic systems cut fuel usage and emissions while improving efficiency.
2013-12-18
Magazine
Fuel cells for auxiliary power OEM and supplier researchers explore the benefits of utilizing solid-oxide fuel-cell APUs to help meet heavy-duty truck anti-idling requirements. Safer EV batteries could enter the crush zone ARPA-e targets "robust" batteries that not only bear loads but also absorb crash-impact energy to save weight.
2013-12-12
Magazine
Achieving efficiency via virtual validation Model-based design and V-Cycle-based development processes address the need for managing complexity, and to some extent, efficiency in product development.
2013-11-07
Magazine
Tackling biodiesel's technical challenges Caterpillar researchers are working to mitigate biodiesel's negative effects on engine components and aftertreatment systems. More for less Telematic systems are offering more features and functions for lower prices. Improving actuation speed and controllability With high-speed hydraulic proportional valves, the performance of existing cam phasing systems can be improved or the actuation mechanisms can be applied directly to engine valve actuation.
2013-10-17
Magazine
Heavy-duty composite brake crack prediction Engineers used both analytical and dynamometer data to determine the damage tolerance of a selectively reinforced aluminum MMC brake drum, which provided some answers but left a lot of questions.
2013-09-03
Magazine
Honda flexes new powertrain muscle Honda R&D's top engineer outlines his company's Earth Dreams powertrain assault that includes more efficient, robust, and refined ICEs; new hybrid drive systems; and further developments in FCEVs, HCCI, plasma ignitions, and Rankine-cycle engine types. Setting Hyundai's fuel cell strategy Hyundai is one of two major OEMs that are still going it alone in developing FCEV technology, rather than collaborating with competitors. The company's head of fuel cell R&D explains the path toward 2015 series production. Volvo Trucks makes a case for DME The truck maker is working with Oberon Fuels and others to bring dimethyl ether-what company execs say is one of the most promising sustainable alternative fuels-to North America in 2015. Sensing a need for creature comforts Automakers and suppliers are turning to new sensors to help make cabins more comfortable and safer while automating some tasks.
Viewing 1 to 30 of 101

Filter

  • Magazine
    754