Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 215
2017-05-04
Magazine
Innovations for lightweighting Tough fuel-economy bogies for 2021 and beyond are driving new approaches to materials use, as seen in these case studies. Axellent progress AAM's new Quantum drive-axle technology is a leap forward in lightweight, efficient driveline systems aimed at 2020 and beyond. Low-temperature combustion ready for prime time? At SAE's High-Efficiency IC Engines Symposium, Delphi said its new, third-generation GDCI is promising, but even LTC proponents admit that challenges remain. More automation for ECU testing The latest fault-insertion tests enable engineers to run more test cases in less time.
2017-03-30
Magazine
Thought leadership at WCX17 Proliferating electrification and performance. Clarity of purpose Honda's 2017 Clarity Fuel Cell has impressive performance, zero emissions and zero range anxiety. Clarity is ready for the mainstream, but is hydrogen fuel? Lightweighting hinges on the details Multi-material design approaches require careful integration of all adjacent constituents. Haptic feedback for gesture-control HMI Mid-air gesture controls rely on sophisticated sensing to aid the human-machine interface and help keep drivers' eyes on the road. Road-efficient mud machine Jeep's new Compass benefits from a trick AWD system co-developed with GKN. Past as prelude to the future SAE's Mobility History Committee brings a trove of knowledge- and cool technology. The new Fellow from Ricardo Prof. Neville Jackson will be recognized as an SAE Fellow at WCX17.
2017-02-02
Magazine
WCX17 Preview The annual SAE World Congress is rebranded WCX17 to express its expanded experience of new-technology discussion and established thought leadership. Achates powers toward production Achates Power's internal-combustion solution is a new play on an old technology. Inside the Bolt EV While the new battery deserves credit for the car's +200-mile range, systems optimization, careful motor design and proprietary CAE tools were equally important. CES 2017: Lush luxury EVs, sophisticated connectivity Suppliers challenge OEMs in advanced tech. Editorial: Question mark or exclamation point Supplier Eye Are you prepared for greater electrification? SAE Standards News VS committees fully engaged on cybersecurity.
2016-11-03
Magazine
SAE Convergence 2016 Talk of the healthy aspects of disruption mingles with SAE's renowned technical emphasis to foster the auto industry's continuing evolution toward electrification and autonomy. The Battery Man Speaks The speed of progress in automotive lithium batteries has impressed AABC's Dr. Menahem Anderman. So has silicon-graphite anode technology development from Tesla and Panasonic. Industry 4.0: The smart factory arrives The plants that produce automotive systems and vehicles are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. Editorial: Promise of 48 volts is no shock Nissan unveils variable-compression-ratio ICE for 2018 Infiniti production model Optimizing engine oil warm-up strategies for 'real-world' driving In search of higher-energy-content batteries Making Multiphysics fast and convenient I.D.
2016-09-01
Magazine
Solving the Greenhouse Gas puzzle While automakers and policymakers debate the TAR, engineers and product planners prepare for the steep climb to meet GHG and CAFE rules beyond 2022. Revving up thermal characterization in the component lab The latest generation of high-speed infrared cameras can capture airbag deployments and other fast-moving actions quickly and accurately. C3 consortium aims for soot solution A newly formed group of companies led by CFD specialists Convergent Science targets exhaust particulate reduction in the combustion chamber. Inside the autonomous vehicle With less focus on driver needs, comfort, safety, and occupant productivity will become key. Editorial: Bad gas?
2016-08-04
Magazine
Special report: Lightweighting Uncovering the next actions in the industry's grand mass-reduction campaign. CAE's next leap forward With 3D simulations skyrocketing, engineers are looking forward to highly-optimized toolsets to keep pace with complexity. SAE Convergence 2016 Preview Meet the disruptors, network with peers and learn about the latest tech solutions that are rapidly changing the auto industry. "Military-grade" aluminum Jaguar, Exa say simulation to eliminate prototypes by 2020 OEMs expand testing of FEV variable-compression ratio engine Growth of FCVs and EVs tied to infrastructure Bolt EV seat design cuts weight, delights tall passengers Rolls-Royce reveals a Vision of its future Volvo bets on new PowerPulse, not 48V, to attack turbodiesel 'lag' SEAT to spearhead VW's new platform and 48V technology Dr. Jay Baron of CAR discusses vehicle lightweighting and predicts the outcome of the crucial CAFE mid-term review.
2016-07-07
Magazine
Technology report Quest for 'new-car smell' dictates interior-materials changes Doing it again-this time with 10 After a successful decade-long collaboration on 6-speed transaxles, Ford and GM partner again on an all-new 10-speed automatic. Here's a look inside the gearbox and the project. Large-scale additive manufacturing for rapid vehicle prototyping A case study from Oak Ridge National Laboratory bridges the 'powertrain-in-the-loop' development process with vehicle systems implementation using big area additive manufacturing (BAAM). Global Vehicles Steel-intensive Mazda CX-9 sheds mass, debuts novel turbo setup
2016-06-02
Magazine
A 24-hour battle of speed and efficiency At Le Mans this month, amped-up hybrid prototype racecars from Audi and Toyota face a revamped Porsche 919 hybrid, while Ford hopes to recapture glory with its new GT-R. Pushing the ICE forward, gradually Emergent technologies from BorgWarner, Eaton and Mahle aim for greater efficiency in gasoline and diesel engines. Smile, you're on Magna camera! Magna Electronics is rapidly expanding production of its made-in-U.S.A. onboard cameras to keep pace with booming OEM demand for safety and vehicle-autonomy vision-systems technology. Multi-material body solutions: Possibilities and manufacturing challenges The body-in-white is a prime target for lightweighting and many automakers are pursuing unique and effective multi-material approaches, but improved design tools and processes might yield greater gains.
2016-03-03
Magazine
Multi-material structures move mpg upward The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping. SAE 2016 World Congress Preview Technology trends and exhibitor products are highlighted in this special section, which features Toyota's plans for the show floor, tech sessions, and more.
2016-01-06
Magazine
Time to get personal Industry engineers are combining apps, voice, the cloud, and other technologies such as artificial intelligence to enable drivers to customize their vehicles and anticipate their needs. Technology report GM and TARDEC co-developing fuel cell powered Chevrolet Colorado for military evaluation vehicles and anticipate their needs. Global vehicles Sports cars take center stage in Tokyo
2015-12-01
Magazine
Hot-stamping process Hot-stamping process from Schuler employs flexible 'pressure controlled hardening' Fuel cell futures no longer a dream Fuel cell technology is catching up with the hype as fuel cell vehicles become reality. Hot Technologies 2016 Our annual review of significant, innovative, and just plain cool technology applications for the new model year.
2015-11-03
Magazine
Active in aero Several automakers-notably Mercedes-Benz and Audi - used the Frankfurt Motor Show stage to reveal sleek vehicles that aggressively employ active aerodynamic elements and other advances to reduce drag. Composites permeate inside and out Composite materials are gaining popularity for both unseen structural components and for exterior eye candy. Powertrain testing: coping with complexity With increasing use of electrical components to extend the performance of conventional combustion engines, powertrain development has never been more complicated. The good news is that test and development engineers are harnessing advanced simulation techniques and computer processing to develop the most efficient and fun powertrains ever. Can ads help in vehicle-to-vehicle rollout? Porsche unveils new downsized, boosted 3.0-L boxer six. Johnson Controls, Faurecia envision interiors for autonomous driving. Jaguar enters performance crossover SUV segment.
2015-10-06
Magazine
2016 Malibu sheds 300 lb, adds new hybrid system More wheelbase, style, fuel economy, and comfort aim to move GM's volume midsize sedan from the sidelines to the fast lane. Lighter, more powerful 2016 Honda Pilot The third-generation SUV gets a sleek new look and plenty of slick technology for enhanced performance and safety. 2016 Mazda MX-5 stays true to its roots Mazda engineers give the industry a lesson in getting more from less. 2016 Land Rover Discovery Sport spearheads more efficient Land Rovers JLR's space-efficient, flexible SUV moves to JLR's new Ingenium modular engines. Audi chooses high technology, cautious design evolution for new A4 In addition to lighter weight and significant improvements in efficiency, the new car employs plenty of technology and driver support.
2015-09-01
Magazine
Driving EVs toward lower cost The race is on to reduce battery and electric-drive systems costs while improving efficiency. Seeking ways to make better computer crashes New models and simulations help improve safety as software and hardware provide more realism to iterate designs more quickly. Evaluating aluminum bonds Adhesively joined aluminum alloy sheets present challenges that steel-adhesive joints do not. Ford researchers present a modified technique to inspect Al-adhesive joints in lab and production environments. Leading the attack on engine pumping losses Cylinder deactivation delivers real-world fuel economy gains, helping vehicles to meet and exceed their sticker numbers. That's why the downsized/boosted guys now want it on their engines.
2015-04-07
Magazine
GM's CTO driving new paths to technology leadership 'We're making actual production commitments regarding our advanced-technology strategy, rather than just talking about it,' says GM's CTO Jon Lauckner. 'We're absolutely going to be among the leaders, if not the leader, in these areas.' Aluminum prepares for its next big leap Ford's F-Series blockbuster was just the beginning. New micromills now in pilot phase aim to bring vastly stronger and more formable light-alloy materials at higher capacity, says Alcoa's Mike Murphy. Slick solutions for friction reduction From new lubricants to 'smart' oil pumps and clever bearing technologies, engine designers are attacking every potential source of spin losses and internal friction in the quest for more mechanical work out of less fuel. Next-gen NSX: a twin-turbo, multi-material Ferrari-fighter The production NSX made its much-awaited global debut at NAIAS in January.
2014-09-16
Magazine
Women in Vehicle Engineering Across the industry, talented women are ascending the engineering-career ladder at higher rates than ever before, but they continue to face challenges in a male-dominated industry. In this Special Report, AE speaks with current and future industry leaders from U.S., European, and Asian OEMs, academia, and other experts, and analyzes data, to assess progress to date and plot the future of this critical and dynamic professional trend. Fuel cells As higher-volume mass production gets underway, OEMs and suppliers are finetuning their capabilities.
2014-08-05
Magazine
Steel red-hot for weight reduction The steel industry's focus to remain a top material choice has not diminished, especially with automakers and suppliers looking for ways to lightweight passenger vehicles to meet the U.S. government's 54.5-mpg fleet average requirement in 2025.
2014-07-01
Magazine
Global Viewpoints The latest strategies are investigated for vehicle development by automakers and major suppliers. Sports cars embrace array of green technology IMSA Tudor United SportsCar Championship promotes a variety of green technologies to link racing to the road. More gears, more challenges Many strategies, as well as key software and hardware aspects related to controllers, networks, sensors, and actuators, must be considered to keep automatic transmissions shifting smoothly as more gears are added to improve fuel economy. Advancing structural composites Industry experts address the opportunities and challenges involved with moving toward composite-intensive vehicles, including Nissan's effort to produce a high-volume, fully recyclable composite liftgate with low metal content.
2014-06-03
Magazine
Systems-engineering a new 4x4 benchmark Chrysler Powertrain teamed with AAM to create the industry's most capable, sophisticated-and arguably most fuel-efficient-AWD/4WD driveline. Top engineers talk about their collaboration. Achates aims at 2025 light-truck power After more than a decade of steady development, Achates Power's opposed-piston two-stroke diesel is impressing powertrain experts with its test results and pace of technical progress. Lighter, stronger chassis Development of a new high-strength aluminum casting alloy for the production of suspension components.
2014-03-18
Magazine
Alternative fuels face challenges With gasoline prices seeming to stabilize and fuel economy measures taking hold is there a compelling need for alternative fuels? Automotive engineers offer some surprising reasons why there is.
2013-11-05
Magazine
Tackling biodiesel's technical challenges Engineers and researchers are working to mitigate biodiesel's negative effects on engine components and aftertreatment systems. Lightweighting with iron Grede throws advanced ultra-high-strength cast ductile iron into the lightweight-materials ring for commercial-vehicle chassis and powertrain applications. Silicon takes over Semiconductor suppliers are altering materials so automakers can add functions and improve reliability.
2013-10-01
Magazine
Chrysler sees the ICE future The three-year, $30 million Multi-fuel Multiair R&D program with the U.S. DOE is nearing completion. Here's what Chrysler Powertrain engineers have learned as they try to achieve a 25% fuel-efficiency gain. Counteracting cyber-attacks As vehicle systems become more complex and interact with more internal and external elements, the potential for outside intrusion and tampering increases for both vehicles and the transportation infrastructure. Kia moves upscale with 2014 Cadenza The all-new premium sedan is the Korean automaker's 'most technologically advanced' vehicle ever on U.S. roadways. 2014 Corvette: 460 hp, 30 mpg, 1 g, $52,000 No other sports car can match the C7's combination of performance, value, and overall efficiency. Chief Engineer Tadge Juechter provides insight on executing a masterpiece.
2013-09-03
Magazine
Honda flexes new powertrain muscle Honda R&D's top engineer outlines his company's Earth Dreams powertrain assault that includes more efficient, robust, and refined ICEs; new hybrid drive systems; and further developments in FCEVs, HCCI, plasma ignitions, and Rankine-cycle engine types. Setting Hyundai's fuel cell strategy Hyundai is one of two major OEMs that are still going it alone in developing FCEV technology, rather than collaborating with competitors. The company's head of fuel cell R&D explains the path toward 2015 series production. Volvo Trucks makes a case for DME The truck maker is working with Oberon Fuels and others to bring dimethyl ether-what company execs say is one of the most promising sustainable alternative fuels-to North America in 2015. Sensing a need for creature comforts Automakers and suppliers are turning to new sensors to help make cabins more comfortable and safer while automating some tasks.
2013-08-06
Magazine
Apps hit the road To make it possible to run safe, useful apps while vehicles are being driven, companies throughout the automotive supply chain are changing the way they work together. Figuring out how to attract and integrate small and large app companies into the long development cycle of vehicles is a major challenge.
2013-06-18
Magazine
Oak Ridge answers A/C-on fuel use questions The lab runs fuel-economy tests with A/C on maximum vs. A/C 'comfort level,' A/C-off and with windows open and closed. Some results are surprising, including an unexpected 'crossover' point in testing on a Toyota Corolla.
2013-06-04
Magazine
Global Viewpoints - Europe: Smartening up R&D As every aspect of automotive technology makes rapid advances, R&D becomes ever more complex and faces additional pressures on cost and time. In our annual report from Europe, we spoke to very senior executives about their R&D methods and the demanding criteria they face. LEDs light the way for SuperTruck A research team developed a group of low-energy; high-output LED lamps for forward lighting that could be retrofitted into the truck's current incandescent headlamp housing and lens. Plastic proliferation under the hood Plastic components continue to displace metal engine parts because of cost and weight advantages.
2013-03-05
Magazine
VW bucks hybrid convention with 2013 Jetta HEV Rather than use a mild-mannered Atkinson-cycle ICE, VW engineers opted for a turbocharger. Their unique P2 hybrid powertrain stands alone in terms of sheer driving fun balanced with efficiency. Synergies strengthen safety systems Complementary technologies and data sharing are enabling enhanced collision avoidance. For example, radar and camera sharing the same processor provides a higher level of safety than two separate systems. A 'model' instrument panel ANSYS researchers implement simulation-driven product development for thermoforming of instrument panels.
2012-11-06
Magazine
Big shifts coming in powertrains During the rest of this decade, many observers expect transmission controls to undergo more changes than in the past 10-15 years. Transmission controls are being revamped to meet tighter fuel economy laws, letting engines run at optimal speeds. Collaborating for cheaper carbon fiber Oak Ridge National Laboratory and several industry partners work together to overcome the challenges to lower-cost carbon fiber. Creating the 54.5-mpg car Part 2 of AEI's three-part series looks at how vehicle engineers are facing a 'stress test' as the countdown to 2025 CAFE begins. How will the aggressive new regulations influence U.S. passenger cars in the next decade-and what will they cost to implement?
2012-10-23
Magazine
Seeking validation Increased system complexity poses new challenges for software design and ECU system validation, mandating the need for simulation tools that can easily handle the complexity, while providing cost-effective, industry-proven verification tools and processes. Mapping the road to 54.5mpg Part 1 of AEI's three-part series looks at the CAFE challenge and the product-development options being weighed to meet it-while engineers look forward to the critical 2018 mid-term review.
2012-10-02
Magazine
A compact Cadillac to beat the Bimmers General Motors engineers were given a clean sheet to develop the 2013 ATS, Cadillac's all-new compact (and light) sport sedan aimed squarely at the 3 Series benchmark. Re-engineered Ram Thermal management-along with other significant changes-improves Ram 1500 fuel economy and earns EPA off-cycle credits. Honda Accord-the 9th generation The all-new 2013 model brings direct injection, a new CVT, MacPherson struts, safety advances, and a plug-in hybrid version./li> Radios expand by turning to micros Versatile systems use microcontrollers, software to meet wide range of requirements. Heavy on the lightweighting Weight reduction is already a significant consideration in companies' product development efforts, and the emphasis is only going to increase in the years ahead, according to SAE-member survey respondents.
Viewing 1 to 30 of 215

Filter