Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 276
2017-11-13
WIP Standard
AMS6562/4
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 250 °F. The composite may be used for the manufacture of primary and secondary aircraft structure. This is the fourth detail spec.
2017-11-13
WIP Standard
AMS6562/5
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 250 °F. The composite may be used for the manufacture of primary and secondary aircraft structure. This is the fifth detail spec.
2017-11-13
WIP Standard
AMS6562/6
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 250 °F. The composite may be used for the manufacture of primary and secondary aircraft structure. This is the sixth detail spec.
2017-11-10
WIP Standard
AMS6567/1
AMS6567 The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is designed specifically for vacuum-bag-only cure, with an initial low temperature cure followed by a higher temperature post-cure. This material is intended for use in laminate applications with a service temperature up to 250 °F. They are typically used in structural applications requiring high strength and stiffness.
2017-11-10
WIP Standard
AMS6567/2
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is designed specifically for vacuum-bag-only cure, with an initial low temperature cure followed by a higher temperature post-cure. This material is intended for use in laminate applications with a service temperature up to 250 °F. They are typically used in structural applications requiring high strength and stiffness.
2017-11-10
WIP Standard
AMS6569/1
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. These materials are designed specifically for vacuum bag autoclave cure. These materials are intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness.
2017-11-10
WIP Standard
AMS6569/2
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. These materials are designed specifically for vacuum bag autoclave cure. These materials are intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness.
2017-11-10
WIP Standard
AMS6568/3
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness.
2017-11-10
WIP Standard
AMS6568/2
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness.
2017-11-10
WIP Standard
AMS6568/1
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have three slash/detail specs.
2017-11-10
WIP Standard
AMS6566/1
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have one slash/detail specs.
2017-11-09
WIP Standard
AMS6562/2
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 250 °F. The composite may be used for the manufacture of primary and secondary aircraft structure. This is the second detail spec.
2017-11-09
WIP Standard
AMS6562/1
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 250 °F. The composite may be used for the manufacture of primary and secondary aircraft structure. This is the first slash/detail spec.
2017-11-09
WIP Standard
AMS6562/3
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 250 °F. The composite may be used for the manufacture of primary and secondary aircraft structure. This is the third detail spec.
2017-11-08
WIP Standard
AMS6569
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. These materials are designed specifically for vacuum bag autoclave cure. These materials are intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have two slash/detail specs.
2017-11-08
WIP Standard
AMS6567
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is designed specifically for vacuum-bag-only cure, with an initial low temperature cure followed by a higher temperature post-cure. This material is intended for use in laminate applications with a service temperature up to 250 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have two slash/detail specs.
2017-11-08
WIP Standard
AMS6565
Establish a new AMS for dry carbon fabric for Hexcel SGP196P IM7 plain weave fabric.
2017-11-08
WIP Standard
AMS6562
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 250 °F. The composite may be used for the manufacture of primary and secondary aircraft structure. This is the basic spec and it will have three slash/detail specs.
2017-11-08
WIP Standard
AMS6568
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have three slash/detail specs.
2017-11-08
WIP Standard
AMS6566
The purpose of this specification is to allow procurement of a defined material corresponding to statistically derived material properties published in CMH-17. This material is intended for use in laminate applications with a service temperature up to 180 °F. They are typically used in structural applications requiring high strength and stiffness. This is the base specification and it will have one slash/detail specs.
2017-10-30
WIP Standard
AIR5431A
This SAE Aerospace Information Report (AIR) offers information about the use of support tooling for composite repair processes, as well as descriptions of some of the different tooling materials used and their applications. If the repair document requires the use of tooling, refer to this AIR for additional information.
CURRENT
2017-06-16
Standard
J1525_201706
This SAE Recommended Practice describes a lap shear test method for use in measuring the bonding characteristics of automotive-type adhesives for joining fiber reinforced plastics (FRPs) to themselves and to metals.
2017-05-26
WIP Standard
ARP4977A
This SAE Aerospace Recommended Practice (ARP) describes standard methods for drying commercial aircraft composite structures prior to repair and gives general guidelines on use and applicability. It addresses the removal of liquids that have collected inside the structures through open damage, microcracks, or porosity and the removal of absorbed moisture from the composite material. The methods described in this document shall only be used when specified in an approved repair document or with the agreement of the original equipment manufacturer (OEM) or regulatory authority. If this document is used for the drying of materials other than thermosetting composite materials, the fitness for this purpose must be determined by the user. The purpose of this document is to provide a set of standard drying methods that may be referenced in repair documents produced by airlines or airframe and engine manufacturers.
CURRENT
2017-05-25
Standard
AMS4254C
This specification covers aluminum alloy sheet laminated with one or more layers of unidirectional aramid fiber/epoxy prepreg. The outer layers are always aluminum alloy.
CURRENT
2017-05-22
Standard
AMS4302C
This specification covers an aluminum alloy in the form of sheet laminated with one or more layers of unidirectional aramid fiber/epoxy prepreg.
2017-03-15
WIP Standard
AMS3711F
This specification covers expanded honeycomb core made of fibrous aramid paper sheets and supplied in the form of blocks, slices, and ordered shapes. This honeycomb core has been used typically for bonded sandwich structures requiring high strength and corrosion resistance in the temperature range -65 to +180 °F (-54 to +82 °C), but usage is not limited to such applications.
2017-01-12
WIP Standard
AMS3713E
This specification covers honeycomb core made of polymide paper sheets in a non-hexagonal, flexible cell configuration and supplied in the form of blocks, slices, and ordered shapes. This honeycomb core has been used tyipcally in sandwich structures in single or compound curvature parts requiring high strength and corrosion resistance in the temperature range -55 to +82 degrees C (-67 to +180 degrees F) but usage is not limited to such applications.
CURRENT
2016-12-27
Standard
AMS3892/10B
This specification covers one type of carbon fiber in the form of tow.
CURRENT
2016-12-16
Standard
AMS3832D
This specification covers continuous, multiple-strand, roving of Type "S-2" glass impregnated with a heat-curable epoxy resin matrix and processed to a "B" stage condition.
CURRENT
2016-12-16
Standard
AMS3892/1C
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation.
Viewing 1 to 30 of 276

Filter

  • Standard
    276