Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 2152
CURRENT
2017-08-17
Standard
AMS3793/3C
This specification covers three classes of para-aramid tape and webbing of a single width and with varying weights.
2017-05-26
WIP Standard
ARP4977A
This SAE Aerospace Recommended Practice (ARP) describes standard methods for drying commercial aircraft composite structures prior to repair and gives general guidelines on use and applicability. It addresses the removal of liquids that have collected inside the structures through open damage, microcracks, or porosity and the removal of absorbed moisture from the composite material. The methods described in this document shall only be used when specified in an approved repair document or with the agreement of the original equipment manufacturer (OEM) or regulatory authority. If this document is used for the drying of materials other than thermosetting composite materials, the fitness for this purpose must be determined by the user. The purpose of this document is to provide a set of standard drying methods that may be referenced in repair documents produced by airlines or airframe and engine manufacturers.
2017-04-13
WIP Standard
AMS3793C
This specification and its supplementary detail specifications cover para aramid in the form of tape and webbing. These products have been used typically in construction of parachutes and their accessories, but usage is not limited to such applications.
2017-03-15
WIP Standard
AMS3711F
This specification covers expanded honeycomb core made of fibrous aramid paper sheets and supplied in the form of blocks, slices, and ordered shapes. This honeycomb core has been used typically for bonded sandwich structures requiring high strength and corrosion resistance in the temperature range -65 to +180 °F (-54 to +82 °C), but usage is not limited to such applications.
CURRENT
2017-02-28
Standard
AS81765A
This specification covers requirements for material used in electrical insulating heat shrinkable components. The continuous operating temperature of these materials shall range from -75°C to +200°C (-103°F to +392°F). (See 6.1).
CURRENT
2017-02-21
Standard
ARP5448/6A
This method outlines a standard procedure for performing conformity tests of bearings utilizing liners of bonded polytetrafluoroethylene (PTFE). The data from these tests shall be used to determine if the product meets the conformity requirements of the applicable specification.
2017-01-12
WIP Standard
AMS3713E
This specification covers honeycomb core made of polymide paper sheets in a non-hexagonal, flexible cell configuration and supplied in the form of blocks, slices, and ordered shapes. This honeycomb core has been used tyipcally in sandwich structures in single or compound curvature parts requiring high strength and corrosion resistance in the temperature range -55 to +82 degrees C (-67 to +180 degrees F) but usage is not limited to such applications.
CURRENT
2016-12-16
Standard
AMS3844C
This specification covers one type of glass cloth impregnated with a heat-reactive, thermosetting, hot-melt, addition-type, polyimide resin system, furnished in continuous rolls of full width material.
CURRENT
2016-12-16
Standard
AMS3892/5C
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation.
CURRENT
2016-12-16
Standard
AMS3892/6B
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation.
CURRENT
2016-12-16
Standard
AMS3892/3C
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation.
CURRENT
2016-12-15
Standard
AMS3895C
This specification covers epoxy-resin-impregnated carbon-fiber broadgoods and tape in the form of multi-plied unidirectional layers constructed from the same or uniform fibers and supplied as broadgood rolls, tape, or cut sheet. The individual ply orientation shall be as ordered.
CURRENT
2016-12-15
Standard
AMS3831B
This specification covers a glass cloth impregnated with a heat-curable epoxy resin system, the resin being processed to a “B” stage condition, and furnished in the form of continuous rolls.
CURRENT
2016-12-15
Standard
AMS3834B
This specification covers a style 7781 glass cloth impregnated with a heat-curable polyester resin system, the resin being processed to a “B” stage condition, and furnished in the form of continuous rolls.
CURRENT
2016-12-15
Standard
AMS3845C
This specification cover glass cloth impregnated with a heat-reactive, thermosetting, addition-cure polyimide resin system, the resin to be supplied in a "B" stage condition.
CURRENT
2016-12-15
Standard
AMS3847D
This specification covers one type of quartz cloth impregnated with a heat-reactive, thermosetting, polyimide resin system, the resin being processed to a "B" stage condition, and furnished in continuous rolls of full width material.
CURRENT
2016-12-15
Standard
AMS3849C
This specification covers one type of quartz cloth impregnated with a heat-reactive, thermosetting, hot-melt, addition-type, polyimide resin system, furnished in continuous rolls of full width material.
CURRENT
2016-12-15
Standard
AMS3890B
The product shall consist of 5-ply yarn having 720 continuous filaments per ply and a maximum of 4 turns per inch (25.4 mm).
CURRENT
2016-12-15
Standard
AMS3892C
This specification and its supplementary detail specifications cover carbon fibers in the form of continuous multifilament tow and yarn.
CURRENT
2016-12-15
Standard
AMS3837E
This specification covers "S" glass in one style of woven fabric with an HTS-904 finish.
CURRENT
2016-12-15
Standard
AMS3892/2C
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation.
CURRENT
2016-12-15
Standard
AMS3892/12A
This specification covers one type of carbon fiber in the form of tow.
CURRENT
2016-12-15
Standard
AMS3892/11B
This specification covers one type of carbon fiber in the form of tow.
CURRENT
2016-12-15
Standard
AMS3892/4C
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation.
CURRENT
2016-12-15
Standard
AMS3892/7B
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation.
CURRENT
2016-12-15
Standard
AMS3892/8B
This specification covers one type of continuous multifilament carbon fibers in the form of a tow or yarn (when twisted). The weight per unit length of the tow or yarn is governed by the filament count which is identified by the supplier's grade or material designation.
CURRENT
2016-12-15
Standard
AMS3892/9C
This specification covers one type of carbon fiber in the form of tow.
CURRENT
2016-12-13
Standard
AMS3801D
This specification covers a low modulus meta-aramid in the form of cloth.
CURRENT
2016-11-11
Standard
AMS3903/4B
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
CURRENT
2016-11-11
Standard
AMS3903/5B
This specification covers one type of epoxy-resin-impregnated organic fibers in the form of woven cloth.
Viewing 1 to 30 of 2152

Filter

  • Standard
    2152