Criteria

Text:
Content:
Display:

Results

Viewing 151 to 180 of 6966
2017-10-16
Event
2017-10-15
Event
This session focuses on fuel injection, combustion, controls, performance and emissions of SI engines fueled with gaseous fuels such as methane, natural gas (NG), biogas, producer gas, coke oven gas, hydrogen, or hydrogen-NG blends. Papers on Diesel-NG or diesel-hydrogen dual-fuel engines will also be accepted in this session.
2017-10-15
Event
Mixed mode using more than one fuel not fully mixed before combustion. Most often with auto ignition of spray injected late. Papers describing experiments and test data, simulation results focused on applications, fuel/additive effects, and RCCI (Reactivity-Controlled Compression Ignition) are invited and will be placed in appropriate sub-sessions. Papers with an emphasis on the modeling aspects of combustion are encouraged to be submitted into FFL110 or FFL120 modeling sessions.
2017-10-15
Event
This session focuses on both SI and CI combustion and mixture preparation during cold start and transient engine operation. Example topics include engine performance, emissions, control strategies and calibrations for cold start and transient operation impact on NOx, PM, HC, CO, and CO2 emissions; also including the impact of variable valve timing, spark, and turbocharger controls.
2017-10-15
Event
This session covers engine combustion control and optimization techniques. Topics include engine combustion diagnostics as specialized for control, control methodologies and algorithms, optimization, related combustion sensing, etc.
2017-10-15
Event
Classical HCCI combustion with temperature controlling combustion onset and only a modest effect of fuel injection. Papers describing experiments and test data, simulation results focused on applications, fuel/additive effects, combustion control, and mode change are invited and will be placed in appropriate sub-sessions. Papers with an emphasis on the modeling aspects of combustion are encouraged to be submitted into FFL110 or FFL120 modeling sessions
2017-10-15
Event
Classical diesel engine combustion with relatively short ignition delay, including papers dealing with low CR and high EGR calibrations. Papers describing experiments and test data, simulation results focused on applications, fuel/additive effects, combustion control, and mode change are invited and will be placed in appropriate sub-sessions. Papers with an emphasis on the modeling aspects of combustion are encouraged to be submitted into FFL110 or FFL120 modeling sessions.
2017-10-15
Event
Mixed mode with auto ignition but inhomogeneous charge. Injection-controlled but with EOI before SOC. Papers describing experiments and test data, simulation results focused on applications, fuel/additive effects, combustion control, and PPC injection strategies are invited and will be placed in appropriate sub-sessions. Papers with an emphasis on the modeling aspects of combustion are encouraged to be submitted into FFL110 or FFL120 modeling sessions.
2017-10-15
Event
Mixed mode with auto ignition but inhomogeneous charge. Injection-controlled but with EOI before SOC. Papers describing experiments and test data, simulation results focused on applications, fuel/additive effects, combustion control, and PPC injection strategies are invited and will be placed in appropriate sub-sessions. Papers with an emphasis on the modeling aspects of combustion are encouraged to be submitted into FFL110 or FFL120 modeling sessions.
2017-10-15
Event
The focus of this session is the performance of integrated vehicle systems and the influence of driving styles and drive cycles on fuel consumption/economy. This will include how integration of vehicle components such as the powertrain, parasitics, accessories, mass elements, aerodynamics, tires, brakes, and hubs affect the overall vehicle energy and energy conversion efficiency.
2017-10-15
Event
In the industry there is continuing work on understanding the interaction of lubricating fluids with driveline hardware and on improving the fluids used in these applications. In this session are presented a variety of papers dealing with different applications where the interaction of driveline fluids with equipment is important.
2017-10-15
Event
This session focuses on work pertaining to the production and fundamental properties of new fuels and methods for assessing their performance. This will include work related to the issues of fuel stability, storage and transportation. Examples include diesel fuel stability, lubricity, cold weather issues, and environmental and toxicological impacts of inclusion of more than 7% biodiesel; the substitution of diesel fuel and gasoline with components other than biodiesel and ethanol respectively.
2017-10-15
Event
Improving the fuel economy performance of engines is one of if not the most critical performance property of engine lubricants. In order to improve fuel economy, engines may operate under conditions where low-speed pre-ignition (LSPI) is occurring more frequently, which can cause damage to the engine. Lubricant advances to improve fuel economy and control LSPI are discussed in this session.
2017-10-15
Event
The main performance properties of engine oils include preventing wear and improving fuel efficiency. However, engine lubricants must also prevent corrosion, seal degradation and not degrade over time. Techniques to study and lubricant technologies to control these often overlooked performance properties of engine oils are constantly being improved. This session will discuss the latest advances in these areas.
2017-10-15
Event
This session is devoted to experimental and computational work in the area of fuel injection systems and sprays. Topics include: spray characterization, cavitation, multi-phase jet modeling, CFD models for spray processes, wall films and impingement, hydraulic circuit analysis, and dissolved gas effects. Studies of both gasoline and diesel fuel sprays and fuel injection equipment are encouraged.
2017-10-15
Event
This session focuses on technologies such as advanced and partially mixed combustion, cooled EGR boosting, ignition and direct injection technologies, pressure boosting, intelligent combustion, thermal efficiency, fully variable valvetrains, and other new and developing technologies.
2017-10-15
Event
Separate sub-sessions cover zero-dimensional, one-dimensional, and quasi-dimensional models for simulation of SI and CI engines with respect to: engine breathing, boosting, and acoustics; SI combustion and emissions; CI combustion and emissions; fundamentals of engine thermodynamics; numerical modeling of gas dynamics; thermal management; mechanical and lubrication systems; system level models for controls; system level models for vehicle fuel economy and emissions predictions.
2017-10-15
Event
The session covers advances in the development and application of models and tools involved in multi-dimensional engine modeling: advances in chemical kinetics, combustion and spray modeling, turbulence, heat transfer, mesh generation, and approaches targeting improved computational efficiency. Papers employing multi-dimensional modeling to gain a deeper understanding of processes related to turbulent transport, transient phenomena, and chemically reacting, two-phase flows are also encouraged.
Viewing 151 to 180 of 6966