Criteria

Text:
Content:
Display:

Results

Viewing 1 to 18 of 18
CURRENT
2017-03-17
Standard
J1698_201703
This recommended practice describes common definitions and operational elements of Event Data Recorders. The SAE J1698 series of documents consists of the following: SAE J1698-1 - Event Data Recorder - Output Data Definition; Provides common data output formats and definitions for a variety of data elements that may be useful for analyzing vehicle crash and crash-like events that meet specified trigger criteria. SAE J1698-2 - Event Data Recorder - Retrieval Tool Protocol; Utilizes existing industry standards to identify a common physical interface and define the protocols necessary to retrieve records stored by light duty vehicle Event Data Recorders (EDRs). SAE J1698-3 - Event Data Recorder - Compliance Assessment; Defines procedures that may be used to validate that relevant EDR output records conform with the reporting requirements specified in Part 563, Table 1 during the course of FMVSS-208, FMVSS-214 and other applicable vehicle level crash testing.
CURRENT
2017-02-24
Standard
J1698/1_201702
This Recommended Practice provides common data output formats and definitions for a variety of data elements that may be useful for analyzing vehicle crash and crash-like events that meet specified trigger criteria. The document is intended to govern data element definitions, to provide a minimum data element set, and to specify EDR record format as applicable for light-duty motor vehicle Original Equipment applications.
2016-07-06
WIP Standard
J1674
The purpose of this SAE Standard is to offer simplified and prioritized guidelines for collecting and preserving on-scene data related to motor vehicle accidents. It is intended that these guidelines improve the effectiveness of data collection, which will assist subsequent analysis and reconstruction of a particular incident. The document is to guide early data collectors whose objectives include documenting information related to the incident. it may be used by law enforcement personnel, safety officials, insurance adjusters and other interested parties. The document identifies categories of scene physical features that deteriorate relatively quickly and recomends documentation task priorities. Detailed methods of collecting data are not part of this document. However, some widely used methods are described in the references in Seciton 2.
CURRENT
2016-03-02
Standard
J1698/1A_201603
SAE J1698-1A creates an appendix to SAE J1698-1. The appendix contains EDR Record parameters and definitions related to light duty passenger vehicle pedestrian protection systems.
CURRENT
2015-12-17
Standard
J1698/3_201512
This SAE Recommended Practice defines procedures intended to be used to validate that relevant EDR output records conform within specified limits to measured sensor input to the device.
CURRENT
2015-12-06
Standard
AS6254A
This SAE Aerospace Standard (AS) covers ULDs utilized in finding submerged aircraft. Such ULDs are installed within the aircraft in a manner that they are unlikely to become separated during crash conditions. The low frequency ULD should be attached to the airframe in accordance with the manufacturer’s recommendations in order to maximize the underwater detection range. ARINC Standard 677 also provides installation guidance for Low Frequency ULDs.
2014-07-02
WIP Standard
J2505
This SAE Recommended Practice provides guidelines for procedures and practices used to obtain and record measurements and to analyze and present results of frictional drag tests of a vehicle with its brakes fully applied at a given roadway location. It is for use at accident sites and test sites and is applicable to straight-line stopping of vehicles such as passenger cars, light trucks and vans under fully braked conditions including locked-wheel skids for vehicles with a conventional braking system and for vehicles with full or partial antilock braking systems (ABS). The average deceleration resulting from a given series of tests is intended to be representative of a frictional drag factor for the conditions under which the test was conducted such as the type of vehicle, type and condition of tires, roadway material and roadway surface conditions. The frictional drag factor is intended to conform to use with the stopping distance formula (Fricke, 1990) as stated in Equation 1.
HISTORICAL
2014-05-08
Standard
J1698_201405
This recommended practice describes common definitions and operational elements of Event Data Recorders. The SAE J1698 series of documents consists of the following: SAE J1698-1 - Event Data Recorder - Output Data Definition; Provides common data output formats and definitions for a variety of data elements that may be useful for analyzing vehicle crash and crash-like events that meet specified trigger criteria. SAE J1698-2 - Event Data Recorder - Retrieval Tool Protocol; Utilizes existing industry standards to identify a common physical interface and define the protocols necessary to retrieve records stored by light duty vehicle Event Data Recorders (EDRs). SAE J1698-3 - Event Data Recorder - Compliance Assessment; Defines procedures that may be used to validate that relevant EDR output records conform with the reporting requirements specified in Part 563, Table 1 during the course of FMVSS-208, FMVSS-214 and other applicable vehicle level crash testing.
HISTORICAL
2013-06-13
Standard
J1698/3_201306
This SAE Recommended Practice defines procedures that may be used to validate that relevant EDR output records conform with the reporting requirements specified in Part 563, Table 1 during the course of FMVSS-208, FMVSS-214 and other applicable vehicle level crash testing.
HISTORICAL
2013-04-29
Standard
J1698/1_201304
This Recommended Practice provides common data output formats and definitions for a variety of data elements that may be useful for analyzing vehicle crash and crash-like events that meet specified trigger criteria. The document is intended to govern data element definitions and EDR record format as applicable for light-duty motor vehicle Original Equipment applications.
CURRENT
2013-01-14
Standard
J1698/2_201301
This Recommended Practice utilizes existing industry standards to identify a common physical interface and define the protocols necessary to retrieve records stored by light duty vehicle Event Data Recorders (EDRs). To accomplish this, the SAE J1962 Diagnostic Connector is designated as the primary physical interface for EDR Retrieval Tools. This Recommended Practice is intended to be used for the development of EDR Retrieval Tools. Retrieval tools are intended to interface with light duty vehicles and to produce EDR Record Reports with data element formats specified by SAE J1698-1. Limitations: This Recommend Practice specifies how EDR records should be imaged, translated, and reported by EDR Retrieval Tools. It does not specify how EDR records are recorded and stored by individual vehicles.
HISTORICAL
2012-02-23
Standard
AS6254
This SAE Aerospace Standard (AS) covers ULDs utilized in finding submerged aircraft. Such ULDs are installed within the aircraft in a manner that they are unlikely to become separated during crash conditions. The low frequency ULD should be attached to the airframe in accordance with the manufacturer’s recommendations in order to maximize the underwater detection range.
CURRENT
2011-08-03
Standard
AS8045A
This AS covers ULD utilized in finding flight data recorders, cockpit voice recorders or aircraft. Such ULDs are installed adjacent to the recorders in a manner that they are unlikely to become separated during crash conditions.
HISTORICAL
2005-03-07
Standard
J1698/1_200503
This document is part of the J1698 document family, and provides the definitions for event-related data items.
HISTORICAL
2005-02-04
Standard
J1698_200502
This recommended practice aims to establish a common format for displaying and presenting crash-related data recorded and stored within certain electronic components currently installed in many light-duty vehicles. This recommended practice pertains only to the post-download format of such data and is not intended to standardize the format of the data stored within any on-board storage unit, or to standardize the method of data recording, storing, or extraction. Historically, crash data recording technology in light-duty vehicles has developed and evolved based on differing technical needs of manufacturers and their customers without industry standards or government regulation. As a result, wide variations currently exist among vehicle manufacturers regarding the scope and extent of recorded data. For this reason, this recommended practice is not intended to standardize or mandate the recording of any specific data element or to specify a minimum data set.
HISTORICAL
2004-05-06
Standard
J1698/2_200405
This Recommended Practice is intended to define a common method for determining how to extract Event Data from a motor vehicle, including the Event Data Set needed to output the Event Record of data elements defined in SAE J 1698. It is intended for use by those developing tools for the purpose of Event Data Set extraction. This Recommended Practices aims to utilize existing industry standards to define a common physical interface and the protocols necessary to Event Data Set extraction. To accomplish this, the SAE J 1962 Diagnostics Connector has been designed the primary physical interface and associated industry standard diagnostic protocols have been designated for communications.
HISTORICAL
2003-12-15
Standard
J1698_200312
This recommended practice aims to establish a common format for displaying and presenting crash-related data recorded and stored within certain electronic components currently installed in many light-duty vehicles. This recommended practice pertains only to the post-download format of such data and is not intended to standardize the format of the data stored within any on-board storage unit, or to standardize the method of data recording, storing, or extraction. Historically, crash data recording technology in light-duty vehicles has developed and evolved based on differing technical needs of manufacturers and their customers without industry standards or government regulation. As a result, wide variations currently exist among vehicle manufacturers regarding the scope and extent of recorded data. For this reason, this recommended practice is not intended to standardize or mandate the recording of any specific data element or to specify a minimum data set.
HISTORICAL
1988-05-16
Standard
AS8045
This SAE Aerospace Standard (AS) specifies minimum performance standards for Acoustic Underwater Locating Devices which are primarily intended for use with both fixed and rotary wing civil aircraft. This AS covers Underwater Locating Devices (ULD) to assist in finding flight recorders, cockpit recorders or aircraft or both. Such ULDs are to be installed adjacent to the recorders in a manner that they are unlikely to become separated during crash conditions.
Viewing 1 to 18 of 18

    Filter

    • Standard
      18