Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 97
2017-01-17
WIP Standard
AIR6916
Provide guidance for use of the AS 6228 standard in evaluation and selection of powered hand tools. May serve as the outline for an organization's internal operating procedure(s) linking power tool evaluation, procurement and support with quality assurance and safety programs.
2016-06-13
WIP Standard
AS6228A
This SAE Aerospace Standard (AS) covers the requirements and technical guidance for evaluation of life-cycle cost, productivity, and safety/health factors related to power hand tool selection. It applies approaches to selection of quieter and lower vibration hand-held powered tools, with optimal ergonomic features, for the prevention of Hand-Arm Vibration Syndrome (HAVS), hearing loss and repetitive motion injuries. It suggests use of noise and vibration data provided by vendors to be verified and supplemented by information available through the National Institute for Occupational Safety and Health (NIOSH) and European Union databases. Inclusion/exclusion of data in this document is not intended to imply that all of the products described herein are the only production models that meet this standard. Consumers are requested to consult with manufacturers concerning lists of stock production models that meet this standard.
CURRENT
2016-03-11
Standard
J287_201603
This recommended practice describes boundaries of hand control locations that can be reached by a percentage of different US driver populations in passenger cars, multi-purpose passenger vehicles, and light trucks (Class A vehicles). This practice is not applicable to heavy trucks (Class B vehicles).
CURRENT
2016-03-10
Standard
USCAR25-3
This document decribes the deign relative to assembly force, and hand clearance guidelines for conventional hand-plug, mechanical assist and twist lock electrical connectors, as well as Connector Position Assurances (CPAs). The minimum values associated with this design guide need to be evaluated against other critical characteristics that impact quality, efficiency and other traits of assembly feasibility. all possible designs and appications could not be anticipated in creating these guidelines. Where there are questions of adherence to this document, such as use of an "off-the'shelf" design, always consult the responsible Ergonomics Department.
HISTORICAL
2016-02-15
Standard
USCAR25-2
This document describes the design relative to assembly force, and hand clearance guidelines for conventional hand-plug, mechanical assist and twist lock electrical connectors, as well as Connector Position Assurances (CPAs). The minimum values associated with this design guide need to be evaluated against other critical characteristics that impact quality, efficiency and other traits of assembly feasibility. All possible designs and applications could not be anticipated in creating these guidelines. Where there are questions of adherence to this document, such as use of an “off-the-shelf” design, always consult the responsible Ergonomics Department.
2016-02-03
WIP Standard
ARP6377
Develop and propagate recommended practices for the design, development, testing and implementation of head worn displays in piloted airborne platforms
2015-05-05
WIP Standard
J3099
Presents the seating accommodation model used to determine seat track length for accommodation in design.
CURRENT
2015-03-30
Standard
USCAR43
This document describes the design and assembly force guidelines for conventional shipping caps, torque caps, and body plugs. All possible design and applications could not be anticipated in creating these guidelines. Where there are questions of adherence to to this document, such as use of an “off-the-shelf” design, always consult the responsible Ergonomics Department.
CURRENT
2015-03-13
Standard
USCAR41
This document describes the assessment methods and physical requirements associated with the manual handling of carts and dollies, specific to material handling systems. All possible designs and applications could not be anticipated in creating these guidelines. Where there are questions of adherence to this document, such as use of an “off-the shelf” design, always consult the responsible Ergonomics Department. Force guidelines were primarily developed referencing the push/pull psychophysical Snook data contained in A Guide to Manual Materials Handling (second edition) by Mital, Nicholson and Ayoub (NY: Taylor & Francis, 1997). The force guidelines accommodate 75% of female capabilities and 99% of male capabilities. Factors that were included in the established guideline include: push / pull distances, vertical hand height, horizontal hand height, frequency and wheel / castor alignment and load rating. These factors were used to develop a conservative force guideline.
CURRENT
2015-03-10
Standard
USCAR42
This document describes the design, assessment methods and physical requirements associated with material handling systems. This would include, but not limited to manual dollies, small lot systems and kitting. All possible designs and applications could not be anticipated in creating these guidelines. Where there are questions of adherence to this document, such as use of an “off-the shelf” design, always consult the responsible Ergonomics Department.
CURRENT
2014-12-03
Standard
J1522_201412
This SAE Recommended Practice describes two-dimensional 95th percentile truck driver side view, seated stomach contours for horizontally adjustable seats (see Figure 1). There is one contour and three locating lines to accommodate male-to-female ratios of 50:50, 75:25, and 90:10 to 95:5.
CURRENT
2014-12-03
Standard
J1521_201412
This SAE Recommended Practice describes two-dimensional, 95th percentile truck driver, side view, seated shin-knee contours for both the accelerator operating leg and the clutch operating leg for horizontally adjustable seats (see Figure 1). There is one contour for the clutch shin-knee and one contour for the accelerator shin-knee. There are three locating equations for each curve to accommodate male-to-female ratios of 50:50, 75:25, and 90:10 to 95:5.
CURRENT
2014-09-12
Standard
AS6228
This SAE Aerospace Standard (AS) covers the requirements and technical guidance for evaluation of life-cycle cost, productivity, and safety/health factors related to power hand tool selection. It applies approaches to selection of quieter and lower vibration hand-held powered tools, with optimal ergonomic features, for the prevention of Hand-Arm Vibration Syndrome (HAVS), hearing loss and repetitive motion injuries. It suggests use of noise and vibration data provided by vendors to be verified and supplemented by information available through the National Institute for Occupational Safety and Health (NIOSH) and European Union databases. Inclusion/exclusion of data in this document is not intended to imply that all of the products described herein are the only production models that meet this standard. Consumers are requested to consult with manufacturers concerning lists of stock production models that meet this standard.
2014-08-18
WIP Standard
J98
This SAE Standard is intended to be used as a guide for manufacturers and users of general purpose industrial machines to provide a reasonable degree of protection for personnel during normal operation and servicing. This document excludes skid steers which are covered by SAE J1388. Avoidance of accidents also depends upon the care exercised by such persons (see SAE J153). Inclusion of this standard instate, federal, or any laws or regulations where flexibility of revision is lacking is discouraged.
CURRENT
2014-07-09
Standard
J232_201407
This SAE Standard establishes performance criteria for towed, semi-mounted, or mounted and arm type rotary mowers with one or more blade assemblies of 77.5 cm blade tip circle diameter or over, mounted on a propelling tractor or machine of at least 15 kW, intended for marketing as industrial mowing equipment and designed for cutting grass and other growth in public use areas such as parks, cemeteries, and along roadways and highways. The use of the word “industrial” is not to be confused with “in-plant industrial equipment.” This document does not apply to: a. Turf care equipment primarily designed for personal use, consumption, or enjoyment of a consumer in or around a permanent or temporary household or residence. b. Equipment designed primarily for agricultural purposes but which may be used for industrial use. c. Self-powered or self-propelled mowers or mowing machines.
CURRENT
2014-07-09
Standard
J1001_201407
The guidelines for operator and bystander protection in this recommended practice apply to towed, semimounted or mounted flail mowers and flail power rakes when powered by a propelling tractor or machine of at least 15 kw (20 hp), intended for marketing as industrial mowing equipment and designed for cutting grass and other growth in public use areas such as parks, cemeteries and along roadways and highways. The use of the word "industrial" is not to be confused with "in-plant industrial equipment". This document does not apply to: 1. Turf care equipment primarily designed for personal use, consumption or enjoyment of a consumer in or around a permanent or temporary household or residence. 2. Machines designed primarily for agricultural purposes but which may be used for industrial use. 3. Self powered or self propelled mowers or mowing machines.
2014-06-30
WIP Standard
J4004
This SAE Recommended Practice describes how to position and posture the H-point design tool (HPD) described in Appendix B, and how to establish the seating reference point (SgRP), design H-point travel path, and other key reference points that are used in the design and specification of both driver and passenger seat positions. This practice also provides a method for determining the length of the seat track for a driver seat that adjusts fore/aft. The seat track length is based on a desired level of driver accommodation, assuming a U.S. population containing an equal number of male and female drivers. The procedure can be used to establish driver seat track accommodation for new vehicle designs or to evaluate accommodation in existing vehicles. A general method for determining driver seat track length for any driver population (male and female stature distribution) at any selected accommodation percentile and gender mix is given in Appendix A.
2014-06-27
WIP Standard
J2732
This document provides dimension definitions that facilitate geometric quantification and evaluation of seats. This document has been designed for use in CAD, however, many dimensions require establishing HPM position and attitude. Refer to the appropriate document for these procedures. These dimensions are package independent in that they do not require use of the HPM-ll supplemental thigh/leg/shoe. Three types of seat geometry reference points and measurements have been developed. 1. Simple reference points and measurements not related to H-point 2. H-point dependent reference points and measurement that utilize the seat characterization capabilities of the HPM to quantify seat measurements 3. Cross sectional seat trim outlines For convenience and simplicity, many terms associated with H-point devices use human body parts in their name.
2014-06-23
WIP Standard
ARP60494
This ARP covers the system design, human interface considerations, and hardware performance recommendations and requirements for touch interactive electronic display systems installed in the cockpit/flight deck for use by pilots. System design and human interface considerations include: identification of functions that could use and benefit from touch interactions, the pilot and cockpit/flight deck environment characteristics that impact usability, and specific pilot interface characteristics such as touch mode, single and multi touch applications, feedback, latency, potential human error, and basic usability. Also addressed are workload, fatigue, and transition from hard to soft control considerations. Hardware issues cover performance aspects of touch screens installed on cockpit/flight deck displays. This ARP is intended to cover Part 23 and 25 category airplanes as well as Part 27 and 29 rotorcraft.
CURRENT
2013-12-17
Standard
J1308_201312
This practice applies to guarding of engine cooling fans used on Off-Road Self-Propelled Work Machines defined in SAE J1116. It does not include guarding for belts, pulleys, or other rotating equipment used on these machines.
2013-11-26
WIP Standard
AIR6288
This document describes operational scenarios and examples of system operation based on the experience of different developers of airborne wake vortex safety systems. This information is intended to supplement the recommendations and guidance given in ARP 6267 “Airborne Wake Vortex Safety Systems” as well as facilitate the application of other wake vortex standards and guidance documents generated by SAE and RTCA.
2013-03-26
WIP Standard
ARP6267
This document recommends criteria for Airborne Wake Vortex Information Systems, including operational objectives, characteristics, and functional requirements. The recommendations in this document apply to transport aircraft, and describe the operational objectives of wake vortex information systems, situational displays, guidance systems, and avoidance/detection systems.
CURRENT
2013-03-26
Standard
J1388_201303
This SAE Standard is intended to provide personnel protection guidelines for skid steer loaders. This document is intended as a guide towards standard practice, but may be subject to frequent change to keep pace with experience and technical advances. This should be kept in mind when considering its use. This document provides performance criteria for newly manufactured loaders and it is not intended for in-service machines.
2012-10-04
WIP Standard
AIR5145A
This SAE Aerospace Information Report (AIR) lists whole body anthropometric surveys and provides current sources for the survey raw data and summary statistics. The purpose of this directory is to provide a single source for accessing anthropometric survey data for human modelers, human factors specialists, and other interested in anthropometric data. It is not meant to provide detailed data on each survey, but to provide readers with enough information to allow them to make a decision about which surveys are of possible application to their work. The reader can then obtain further information and actual data from the listed points of contact.
2012-08-15
WIP Standard
AIR6804
The scope of this document is to provide a definition of the minimum set of flight information and symbology required for safe operation of aircraft when displayed on an electronic flight information system (EFIS), including but not limited to Primary Flight Display (PFD) as a Minimum Information Display List (MIDL).
CURRENT
2012-06-29
Standard
J1042_201206
This SAE Standard applies to General-Purpose Industrial Machines described in Category 2 of SAE J1116, but excludes skid steer loaders (covered by SAE J1388). Protection for the operator of an attachment (for example, a backhoe) is excluded from the scope of this document.
CURRENT
2012-06-11
Standard
AS8568A
This specification covers hand-held prismatic stereoscopic binoculars for aeronautical use in search, rescue, and patrol operations. (See 6.1.)
CURRENT
2012-06-11
Standard
AIR4742A
The scope of this document is limited to descriptions of the display characteristics of the Flight Dynamics, Inc. (FDI) Model 1000WS Head up Guidance System (HGS) as installed on the Boeing 727 airplane and certified by the Federal Aviation Administration for use in Category III landing operations. The symbology depicted in this document is referenced to the particular pilot task(s) for which it was designed. Also included are descriptions of operational features of the particular symbol along with any associated criteria regarding symbology constraints, source data, or position error.
CURRENT
2012-01-06
Standard
J2896_201201
These test procedures apply to complete seat systems (production seats or prototypes built at the intended manufacturing quality); however, the procedures can be modified for subsystem or component level testing.
CURRENT
2010-10-22
Standard
J1750_201010
This SAE Recommended Practice establishes three alternate methods for describing and evaluating the truck driver's viewing environment: the Target Evaluation, the Polar Plot and the Horizontal Planar Projection. The Target Evaluation describes the field of view volume around a vehicle, allowing for ray projections, or other geometrically accurate simulations, that demonstrate areas visible or non-visible to the driver. The Target Evaluation method may also be conducted manually, with appropriate physical layouts, in lieu of CAD methods. The Polar Plot presents the entire available field of view in an angular format, onto which items of interest may be plotted, whereas the Horizontal Planar Projection presents the field of view at a given elevation chosen for evaluation. These methods are based on the Three Dimensional Reference System described in SAE J182a.
Viewing 1 to 30 of 97

Filter

  • Standard
    97