Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 118
CURRENT
2017-02-21
Standard
J2773_201702
This Standard describes methods to understand the risks associated with vehicle mobile air conditioning [MAC] systems in all aspects of a vehicle’s lifecycle including design, production, assembly, operation and end of life. Information for input to the risk assessment is provided in the Appendices of this document. This information should not be considered to be complete, but only a reference of some of the data needed for a complete analysis of the risk associated with the use of refrigerants in MAC systems.
2016-12-29
WIP Standard
ARP5718B
This document describes: a. the preparatory steps to test experimental Type II, III, and IV fluids according to AMS1428; b. the recommendations for the preparation of samples for endurance time testing according to ARP5485; c. a short description of the recommended field spray test; d. the protocol to generate draft holdover time guidelines from endurance time data obtained from ARP5485; e. the protocol for inclusion of Type II, III, and IV fluids on the FAA and Transport Canada lists of fluids and the protocol for updating the lists of fluids; f. the role of the SAE G-12 Aircraft Deicing Fluids Committee; g. the role of the SAE G-12 Holdover Time Committee; h. the process for the publication of Type II, III, and IV holdover time guidelines. This document does not describe laboratory testing procedures. This document does not include the qualification process for AMS1424 Type I fluids.
2016-12-12
WIP Standard
AIR6130A
14-day material test to determine the cyclic effects of runway deicing compounds on cadmium plated parts.
2016-08-10
WIP Standard
AIR6211A
This test method provides stakeholders (runway deicing chemical manufacturers, deicing/anti-icing chemical operators and airport authorities) with a relative ice penetration capacity of runway deicing/anti-icing chemicals, by measuring the ice penetration as a function of time. Such runway deicing/anti-icing chemicals are often also used on taxiways and other paved areas. This test method does not quantitatively measure the theoretical or extended time of ice penetration capability of ready-to-use runway deicing/anti-icing chemicals in liquid or solid form.
2016-05-19
WIP Standard
AS1426C
This specification is intended to be used as a general standard for industry use for design and construction of air transport galley equipment and inflight food service systems.
2016-05-18
WIP Standard
AMS1424/3
This detail specification AMS1424/3 covers the use of In-Truck Manufacturing of a deicing SAE Type I deicing/anti-icing fluid. This detailed specification contains technical and other requirements that apply for the In-Truck Manufacturing of Type I deicing/anti-icing fluid.
2016-05-09
WIP Standard
ARP4902C
This document provides information and guidance material to assist in assessing the need for and feasibility of developing deicing facilities, the planning (size and location) and design of deicing facilities, and assessing environmental considerations and operational considerations associated with de-icing facilities. The document presents relevant information necessary to define the need for a deicing facility and factors influencing its size, location and operation. The determination of the need for deicing facilities rests with Airports. Although this document intends to provide information to airport operator and deicing facility planner/designer, all stakeholders, including deicing service providers, should be involved in the development process.
CURRENT
2016-03-03
Standard
J2683_201603
This SAE Standard applies to Carbon Dioxide R-744 refrigerant used to service motor vehicle passenger air-conditioning (A/C) systems designed to use CO2 (R-744). Hermetically sealed, refrigerated cargo systems are not covered by this document.
CURRENT
2015-11-05
Standard
J1939/3_201511
SAE J1939-03 provides requirements and guidelines for the implementation of On Board Diagnostics (OBD) on heavy-duty vehicles (HDV) using the SAE J1939 family of standards. The guidelines identify where the necessary information to meet OBD regulations may be found among the SAE J1939 document set. Key requirements are identified here to insure the interoperability of OBD scan tools across individual OBD compliant vehicles. Market-defined regulations permit the use of SAE J1939 to meet OBD requirements. Implementers are cautioned to obtain and review the specific regulations for the markets where their products are sold. This document is focused on guidelines and requirements to satisfy the State of California Air Resources Board (ARB), the authors of 13 CCR 1971.1, United States Environmental Protection Agency, Euro IV and V requirements from European Commission directives, and UN/ECE WP 29 GRPE WWH OBD Global Technical Regulation (GTR).
2015-10-22
WIP Standard
AS6286/3
This document covers the standards for qualifying staff, different aspects of de-icing/anti-icing fluids. In conjunction with the main document and other related slash sheets it will provide guidelines for the proper procedures to deice and anti-ice aircraft on the ground information to support this training program is provided to make the material a better tool for the preparation and execution of the training & qualification. It is intended to provide a common basis for de-icing/anti-icing training and qualification for de- icing providers and airlines. This material was compiled using various international documents with support from SAE documents and individually contributed editorial comments. Its purpose is to serve as a “Globalized Deicing Training Manual”.
CURRENT
2015-04-23
Standard
J2992_201504
The scope of this document focuses on the tests required by EPA to validate the performance of the FTIR system following the section in the Code of Federal Regulations Part 1065 (40CFR1U.1065 and hereafter referred to as “EPA Part 1065”) on the guidelines and performance criteria for various regulated gases. This document focuses on the use of continuous emissions sampling for both Engine and Vehicle testing. Future addenda will be needed to cover bag and other sampling techniques. Gas components that do not currently have performance criteria but may soon be regulated are noted and EPA suggestions as to what should be required are applied. This will help ensure that the FTIR will be recognized as a valid and alternative tool for engine exhaust emissions testing. Components in engine exhaust that are specifically called out in this document include: carbon monoxide (CO), carbon dioxide (CO2), oxides of nitrogen (NO, NO2 and N2O), ammonia (NH3), methane (CH4), and formaldehyde (H2CO).
2015-04-19
WIP Standard
J2740
This Technical Information Report defines the General Motors UART Serial Data Communications Bus, commonly referred to as GM UART. This document should be used in conjunction with SAE J2534-2 in order to fully implement GM UART in an SAE J2534 interface. SAE J2534-1 includes requirements for an interface that can be used to program certain emission-related Electronic Control Units (ECU) as required by U.S. regulations, and SAE J2534-2 defines enhanced functionality required to program additional ECUs not mandated by current U.S. regulations. The purpose of this document is to specify the requirements necessary to implement GM UART in an aftermarket SAE J2534 interface intended for use by independent automotive service facilities to program GM UART ECUs in General Motors vehicles.
2015-04-09
WIP Standard
J3094
Create a standard for measurement of the performance characteristics of an Internal Heat Exchanger. The standard should make it easier to innovate designs and bring improvements to this new technology.
2015-02-24
WIP Standard
AMS6890
No change
CURRENT
2014-08-05
Standard
ARP5149BDA
This Digital Annex (DA) contains the current, full-PDF version of ARP5149B, Training Program Guidelines for Deicing/Anti-Icing of Aircraft on Ground, as well as .jpeg format files of Appendix D, Application Guidelines Configuration, Critical Component, and Spray Area Diagrams for Aircraft. The .jpeg diagram files may be used by purchasers in accordance with the terms of the included license agreement.
2014-07-22
WIP Standard
AS6332
A program, which ensures quality with the relevant standards shall be introduced for all on-line Stations where de-icing/anti-icing of aircraft on the ground is either normally carried out, or where local conditions may periodically lead to a requirement for airplcraft to be de-iced/anti-iced. Deficiencies, in regard to a Station's local de-icing/anti-icing procedures, shall be identified and subsequently actioned through this program, thereby ensuring that the required safety standards are maintained.
CURRENT
2014-07-22
Standard
AS9968
This AS describes a standard method for viscosity measurements of thickened (AMS1428) anti-icing fluids. Fluid manufacturers may publish alternate methods for their fluids. In case of conflicting results between the two methods, the manufacturer method takes precedence. To compare viscosities, exactly the same measurement elements (including spindle and container size) must have been used to obtain those viscosities.
CURRENT
2014-06-24
Standard
AS5901C
This document establishes the minimum requirements for an environmental test chamber, and test procedures to carry out anti-icing performance tests according to the current materials specification for aircraft deicing/anti-icing fluids. The primary purpose for such a test method is to determine the anti-icing endurance under controlled laboratory conditions of AMS1424 Type I and AMS1428 Type II, III, and IV fluids.
CURRENT
2014-06-20
Standard
ARP8058
This SAE Aerospace Recommended Practice (ARP) provides design guidance and a method for testing thermal performance of airplane in-flight food storage carts. It is noted that thermal performance criteria is not part of AS8056.
2014-06-09
WIP Standard
ARP6331
This document recommends contents for Emergency Medical Kits, including medications and instrumentation, intended for use on passenger-carrying aircraft serviced by at least 1 flight attendant. Recommended practices for carriage of, access to, and maintenance of Emergency Medical Kits are also included.
CURRENT
2014-05-01
Standard
ARP4260B
This SAE Aerospace Recommended Practice (ARP) contains methods used to measure the optical performance of airborne electronic flat panel display (FPD) systems. The methods described are specific to the direct view, liquid crystal matrix (x-y addressable) display technology used on aircraft flight decks. The focus of this document is on active matrix, liquid crystal displays (LCD). The majority of the procedures can be applied to other display technologies, however, it is cautioned that some techniques need to be tailored to different display technologies. The document covers monochrome and color LCD operation in the transmissive mode within the visual spectrum (the wavelength range of 380 to 780 nm). These procedures are adaptable to reflective and transflective displays paying special attention to the source illumination geometry. Photometric and colorimetric measurement procedures for airborne direct view CRT (cathode ray tube) displays are found in ARP1782.
CURRENT
2014-04-14
Standard
ARP5446A
These recommendations are provided to aid the international air transport industry by identifying a standard, minimum amount of safety instructions that should be given to sight-impaired passengers. This document is not meant to address problems associated with communicating safety information to sight-impaired passengers who are also hearing impaired or non-conversant in the language(s) used by the cabin crew to disseminate general safety information to passengers. Aircraft operators are encouraged to customize the safety instructions for their own operations in order to ensure that required safety information is provided to sight-impaired passengers.
2014-03-06
WIP Standard
AIR6501
To provide a method that accounts for the attenuation due to line-of-sight blockage of aircraft noise by terrain features.
2014-03-06
WIP Standard
AIR6297
To provide a method for modeling the noise directivity behind start-of-takeoff roll based on empirical data from modern jet aircraft. This method would replace the method described in Section 3.3.1 of SAE-AIR-1845A "Procedure for the Calculation of Airplane Noise in the Vicinity of Airports."
2014-01-09
WIP Standard
J2772
This Standard is restricted to refrigeration circuits that provide air-conditioning for the passenger compartments of passenger and commercial vehicles. This Standard includes analytical and physical test procedures to evaluate concentration inside the passenger compartment. In the early phases of vehicle evaluation, usage of the analytical approach may be sufficient without performing physical tests. The physical test procedure involves releasing refrigerant from an external source to a location adjacent to the evaporator core (inside the HVAC-Module). An apparatus is used to provide a repeatable, calibrated leak rate. If the system has multiple evaporators, leakage could be simulated at any of the evaporator locations. This standard gives detail information on the techniques for measuring R-744 [CO2] and R-1234yf [HFO-1234yf], but the general techniques described here can be used for other refrigerants as well.
CURRENT
2013-11-06
Standard
ARP5149B
This document establishes the minimum criteria for effective training of air carrier and contractor personnel to deice/anti-ice aircraft to ensure the safe operation of aircraft during ground icing conditions. Appendix D specifies guidelines for particular airplane models.
CURRENT
2013-10-10
Standard
ARP1315E
This SAE Aerospace Recommended Practice (ARP) establishes safety recommendations for lavatories in transport category airplanes.
CURRENT
2013-09-19
Standard
ARP499C
The purpose of this SAE Aerospace Recommended Practice (ARP) is to provide recommendations which will lead to the standardization of passageway door operation in all transport aircraft, by providing in the design, features which will result in minimum exit passage blockage and jamming.
CURRENT
2013-09-19
Standard
AIR5401A
This SAE Aerospace Information Report (AIR) provides information demonstrating the need for establishing design and performance standards for aircraft crash axes.
CURRENT
2013-09-19
Standard
ARP695E
This Aerospace Recommended Practice provides design and installation criteria intended to enhance overall safety by mitigating exposure of cabin crew and passengers to risks from: Routine use of galley systems. Galley components or equipment becoming dislodged under routine or abnormal operating conditions and under survivable crash or ditching conditions. Malfunctions of, or defects in, a galley system or associated galley equipment. NOTE: It is not the purpose of this Aerospace Recommended Practice to specify the specific designs or design methods to be followed in the accomplishment of stated objectives.
Viewing 1 to 30 of 118

Filter

  • Standard
    118