Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 370
2017-11-03
Magazine
Rockets re-engineered-a step further into the cosmos Powertrain design for reliability Ice breaker Mazda's Skyactiv-X beats the big companies to market with a promising new engine that marries Otto and Diesel attributes. Advances for off-highway engine design As manufacturers continue to drive out cost and meet a worldwide patchwork of regulatory frameworks, the tools for developing those engines are advancing. From showcase prototypes to advanced analytical techniques, suppliers are helping the cause. Aeroacoustic simulation delivers breakthroughs in aircraft noise reduction Autonomy testing: Simulation to the rescue Autonomous technology development injects new rigors on vehicle-development testing.
2017-08-24
Magazine
On-Orbit Satellite Refueling Flow Measurement The Path from Concept to Operational Status Radiation Tolerant "Smart Backplanes" for Spacecraft Avionics Using Heat Pipes to Cool Embedded Computers Electronically Dimmable Aircraft Windows How do you block the light of the sun? Eliminating Electrical Arcing in Satellite Systems NASA Miniaturizes Century-Old Radio Sounder Technology Developing an Airborne Optical Systems Testbed (AOSTB) New Class of Excimer-Pumped Atomic Lasers (XPALS) Research demonstrates the viability of an atomic laser having a quantum efficiency greater than one. Hydrodynamic Drag Force Measurement of a Functionalized Surface Exhibiting Superhydrophobic Properties Comparing the skin friction drag effects of a superhydrophobic flat plate to an untreated flat plate of the same material and geometry.
2017-08-03
Magazine
Collaborating on diesel emission control Stringent fuel-efficiency and criteria-pollutant standards call for new combustion strategies. The SwRI-led Advanced Combustion Catalyst and Aftertreatment Technologies consortium reinvents existing technologies and experiments with new catalysts to meet standards. More intelligence equals more efficiency, enhanced functionality Advanced systems require renewed focus on architectures, processors, sensors and networks. Appraising the potential for platooning in the U.S. Researchers from the National Renewable Energy Laboratory perform statistical analysis based on a large collection of real-world U.S. truck usage data to estimate the fraction of total miles that are technically suitable for platooning. Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will largely drive vehicle developments in the coming years, according to experts presenting at the revamped SAE COMVEC 17.
2017-04-06
Magazine
Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2017-02-03
Magazine
A greener future for two-wheelers New BS VI emissions standards for two-wheelers are an enviro-opportunity. Additive manufacturing How 3D printing will transform the A&D support chain. Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Advances in lightweight electronics protection Conformal coatings increase reliability of aerospace and military assemblies.
2016-12-02
Magazine
Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2016-10-07
Magazine
The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.
2016-08-05
Magazine
Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-06-03
Magazine
Executive viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2016-05-17
Magazine
Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.
2016-04-08
Magazine
Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
2015-10-07
Magazine
HMIs extend beyond the cab Telematics functions are being integrated into multi-function user interfaces. Standards step forward in design of off-highway electronics Functional safety standards are starting to impact many development projects, while the auto industry's AUTOSAR standard is being deployed to help enable software reuse and simplify designs. Leveraging automotive lightweighting techniques to improve off-highway emissions Where systems engineers can gain efficiencies in off-highway equipment is agnostic, they'll take it anywhere, and so they should, but one of the ways, often underestimated, is through the use of strong and lightweight advanced materials. Waste heat recovery for the long haul A WHR system based on an organic Rankine cycle has been developed for a long-haul Iveco Stralis truck.
2015-08-18
Magazine
The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
2015-08-05
Magazine
Making sense of autonomy Industry offers a range of sensors that will free humans from many tasks while also improving reliability, though devising strategies that meet demanding requirements without breaking the bank is no easy challenge. Life-cycle planning-Design and calibration for ultimate efficiency The ultimate power of Big Data technologies relies on the implementation of new strategies. Unlike a traditional engine calibration process, in which only calibration test data and model simulation data are used, multiple source data introduced into the adaptive engine calibration process contributes to efficiency and cost reduction. The complicated future of off-highway engines Developing an optimum engine is getting tricky now that the European Union has established a Stage V for off-highway engines, and the U.S. has not. What effect will this have on future engine designs?
2015-06-03
Magazine
Executive Viewpoints Off-highway industry executives from companies such as BorgWarner, Perkins, Cummins, and Danfoss reflect upon challenges inside, and outside, the industry, and what technologies, innovations, and strategies will need to be implemented to thrive into the long-term future. 16th Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2015-04-08
Magazine
Hydraulics still in control of off-highway needs Engineers continue to master electronic controllers and software to help systems manage engine speeds and boost efficiency, to the ultimate benefit of both OEMs and end-users. Off-highway calibration challenges-big and complex As the final set of Tier 4 regulations kick in for engines greater than 750 hp (560 kW), calibration efforts must contend with complex engine and aftertreatment systems. Engine manufacturers and service providers deal with this complexity, but does it need to be so? DEF delivery modelling for SCR systems Researchers characterize a 0-D model of a urea delivery module, oriented to model-based control and to the simulation of the system response to fault injections finalized to diagnosis validation.
2014-05-08
Magazine
Executive Viewpoints Off-highway industry executives write about some of the challenges and trends facing the industry over the next 20 years, and the innovation that will be required to stay competitive and sustainable. Annual product guide A product roundup showcasing the newest and most innovative supplier technologies in a variety of areas such as Powertrain & Energy, Electronics, Hydraulics, Materials, Testing & Simulation, Body and Chassis, and Interiors.
2014-03-04
Magazine
Touch-less control coming to cars Use of proximity and gesture-recognition systems in auto cockpits could rise fifty-fold within a decade. Forming a strong bond Multi-material vehicles are becoming more prevalent as automakers attempt to reduce vehicle weight and boost fuel efficiency. Selecting the proper adhesive is critical when bonding dissimilar materials. SAE 2014 World Congress preview special section: 'Creating New Possibilities' Host company Hyundai and Tier 1 Strategic Partner, Delphi, established "Creating New Possibilities" as the theme for this year's premier engineering event taking place April 8-10 in Detroit's Cobo Center. This special Congress preview section uncovers some of those possibilities, featuring insights from the event's executive leadership; details of a Delphi/Hyundai advanced engine program; highlights from the technical program in the areas of powertrain, materials, testing and simulation, electronics, interiors, and body/chassis; and more.
2014-02-06
Magazine
What's New at ConExpo/IFPE A preview of some of the new products and technologies that companies plan to showcase at this year's ConExpo-Con/Agg, which is co-located with the IFPE fluid-power event in Las Vegas from March 4-8. Injection strategies for improving emissions characteristics Premixed charge compression ignition reduces NOx and soot emissions, but requires the optimization of the injection timing and pressure, fuel mass in pilot injection, and EG R rate. Systems that talk together, are efficient together Design teams take a holistic view, linking engines, transmissions, hydraulics, and aftertreatment systems to boost efficiency and performance. Managing the deluge of data The model-based development (MBD) process has been a key enabler of technical advancement in the transportation industry; however, the MBD process leads to the generation of large volumes of data artifacts and work products.
Viewing 1 to 30 of 370

Filter

  • Magazine
    370