Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 53
2017-04-06
Magazine
Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2016-12-02
Magazine
Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs
2016-10-07
Magazine
The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.
2016-08-05
Magazine
Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-06-03
Magazine
Executive viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2016-04-08
Magazine
Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2015-10-07
Magazine
HMIs extend beyond the cab Telematics functions are being integrated into multi-function user interfaces. Standards step forward in design of off-highway electronics Functional safety standards are starting to impact many development projects, while the auto industry's AUTOSAR standard is being deployed to help enable software reuse and simplify designs. Leveraging automotive lightweighting techniques to improve off-highway emissions Where systems engineers can gain efficiencies in off-highway equipment is agnostic, they'll take it anywhere, and so they should, but one of the ways, often underestimated, is through the use of strong and lightweight advanced materials. Waste heat recovery for the long haul A WHR system based on an organic Rankine cycle has been developed for a long-haul Iveco Stralis truck.
2015-08-05
Magazine
Making sense of autonomy Industry offers a range of sensors that will free humans from many tasks while also improving reliability, though devising strategies that meet demanding requirements without breaking the bank is no easy challenge. Life-cycle planning-Design and calibration for ultimate efficiency The ultimate power of Big Data technologies relies on the implementation of new strategies. Unlike a traditional engine calibration process, in which only calibration test data and model simulation data are used, multiple source data introduced into the adaptive engine calibration process contributes to efficiency and cost reduction. The complicated future of off-highway engines Developing an optimum engine is getting tricky now that the European Union has established a Stage V for off-highway engines, and the U.S. has not. What effect will this have on future engine designs?
2015-06-03
Magazine
Executive Viewpoints Off-highway industry executives from companies such as BorgWarner, Perkins, Cummins, and Danfoss reflect upon challenges inside, and outside, the industry, and what technologies, innovations, and strategies will need to be implemented to thrive into the long-term future. 16th Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2015-04-08
Magazine
Hydraulics still in control of off-highway needs Engineers continue to master electronic controllers and software to help systems manage engine speeds and boost efficiency, to the ultimate benefit of both OEMs and end-users. Off-highway calibration challenges-big and complex As the final set of Tier 4 regulations kick in for engines greater than 750 hp (560 kW), calibration efforts must contend with complex engine and aftertreatment systems. Engine manufacturers and service providers deal with this complexity, but does it need to be so? DEF delivery modelling for SCR systems Researchers characterize a 0-D model of a urea delivery module, oriented to model-based control and to the simulation of the system response to fault injections finalized to diagnosis validation.
2014-05-08
Magazine
Executive Viewpoints Off-highway industry executives write about some of the challenges and trends facing the industry over the next 20 years, and the innovation that will be required to stay competitive and sustainable. Annual product guide A product roundup showcasing the newest and most innovative supplier technologies in a variety of areas such as Powertrain & Energy, Electronics, Hydraulics, Materials, Testing & Simulation, Body and Chassis, and Interiors.
2014-02-06
Magazine
What's New at ConExpo/IFPE A preview of some of the new products and technologies that companies plan to showcase at this year's ConExpo-Con/Agg, which is co-located with the IFPE fluid-power event in Las Vegas from March 4-8. Injection strategies for improving emissions characteristics Premixed charge compression ignition reduces NOx and soot emissions, but requires the optimization of the injection timing and pressure, fuel mass in pilot injection, and EG R rate. Systems that talk together, are efficient together Design teams take a holistic view, linking engines, transmissions, hydraulics, and aftertreatment systems to boost efficiency and performance. Managing the deluge of data The model-based development (MBD) process has been a key enabler of technical advancement in the transportation industry; however, the MBD process leads to the generation of large volumes of data artifacts and work products.
2013-06-13
Magazine
National Instruments Keeping pace with increasingly intelligent machines Molex Autonomous equipment positioned to be next disruptive technology Sauer-Danfoss Speed wins IAV Engineering in the virtual world Mentor Graphics What will save us from electrical system design complexity? Perkins Designing for diversity TTControl Intelligent controls and connectivity Federal-Mogul Technology strategies for the future Dana Innovation that addresses global megatrends dSPACE Can you imagine your life without challenges? Tenneco Technology meets regulatory challenges Southco Shifts in design energy Bosch Rexroth Manufacturing and logistical excellence MathWorks Continuous improvement to meet new challenges
2013-05-09
Magazine
Keeping cool Advanced insulation packages, solar reflective film, and other thermal-management technologies enable heavy vehicles to reduce idle climate control loads, as demonstrated by NREL's CoolCab project.
2013-03-07
Magazine
Heavy-duty designs on aftertreatment The introduction of stringent EPA 2015 regulations for locomotive/marine engines and IMO 2016 Tier III marine engines precipitated the need to develop large diesel engine aftertreatment systems. Gaining control of damping Strong nonlinearities of hydraulic systems and the unpredictable operating conditions of the specific application (e.g., uneven ground, varying loads) are the main challenges to the development of satisfactory general vibration damping methods and controls. Getting real about test cycles Fuel consumption of working machines is strongly influenced by machine specification, working environment, and operator behavior, therefore a mix of several test cycles is necessary. The case for Class 8 hybrids Hybrid technology may not be the best solution for all heavy-truck applications, but a Caron Engineering expert explains how it can still benefit Class 8 vehicles.
2013-02-07
Magazine
Powdered tires Researchers quantify several environmental benefits associated with using ultra-fine scrap tire rubber powders in virgin and recycled rubber and plastics compounds.
2012-11-29
Magazine
Heavy-duty engine blender Researchers at Southwest Research Institute and Navistar exploring the feasibility of micro-pilot diesel-injection dual-fuel combustion at key part load conditions found it offers ultra-low smoke and NOx emissions while maintaining diesel-comparable fuel consumption and noise levels.
2012-11-08
Magazine
Biofuel opportunities and pitfalls Annual growth in biofuels has been strong but is expected to slow in the near future. User interfaces going mainstream Off-highway HMIs use consumer technologies to add functions, simplify tasks. Reducing the environmental impact of hydraulic systems OEMS and their suppliers are creating new hydraulic systems and components, using new fluids and remanufacturing to save energy and reduce the environmental impact of off-highway equipment. Multiple controllers add to EV complexity Model-based design has revolutionized the way products are developed, with design shifting from parts to the whole.
2012-10-11
Magazine
Digital engineering for Tier 4 With the final phase-in of the U.S. EPA Tier 4 emissions standard set to take effect by 2015, off-highway engine developers are accelerating product introductions. Design challenges remain for manufacturers even after the final phase-in while CAE software providers improve technology.
2012-09-06
Magazine
The big engine that could With the stringent EPA 2015 regulations on large diesel engines for locomotive, marine, and stationary generator applications, the need for NOx reduction via urea SCR catalyst arises given the proven performance of urea SCR. Monitoring hydraulics Component producers and vehicle service providers offer their views of hydraulic diagnostics as the industry moves toward real-time, intelligent health monitoring, predictive failure software algorithms, and wireless notification. Engine management expands from minute movements to full vehicle Electronic controls grow in complexity as engine designers extend their scope to include hydraulics.
2012-07-05
Magazine
After diesel A look at some offshoots-hybrids, HCCI, and alternative fuels-to the ever-popular diesel engine in the off-highway industry. Software gains (hydraulic) power Development processes are being revised as software becomes a centerpiece of electrohydraulic designs. Virtual sensing gets real As emissions regulations get more strict, emissions measurement must get more precise for onboard diagnostics, engine control, and model-based controller design.
2012-05-24
Magazine
The light stuff Engineers look to lightweighting construction and agricultural equipment to contribute to efficiency while maintaining safety compliance.
2012-05-03
Magazine
Perkins Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Sustainability matters Cummins Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Ready for more Eaton Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Unskew the talent system and build a sustainable future Sauer-Danfoss Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Value-added engineering takes time out of the equation Bosch Rexroth Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Focusing on technology, for sustainability Mentor Graphics Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Knowledge-keep it, don't lose it Dana Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Sustainability driven by technological innovation and global footprint MathWorks Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Moving toward sustainable product development with model-based design TDT Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Aerodynamic design methodology meets commercial challenges in off-highway industry
2011-11-03
Magazine
Tier 4 for large bore Engineers show that a pre-turbine aftertreatment system offers clear and distinct benefits in terms of compact, cost-effective emissions reductions. Programmed for safety and reliability The software that adds features and functions is becoming more reliable as standards and new techniques transform design processes. Electrohydraulics improve with new lift-control strategy Fuel consumption, torque delivery, and emissions can all be improved through flexible control of the valve timing, duration, and lift.
2011-09-22
Magazine
Materials' effect on aftertreatment Researchers from Tenneco discuss DPF acoustic performance through an evaluation of various materials and conditions.
2011-09-01
Magazine
The man challenges of Tier 4 engineering Cutting and controlling emissions are the surface goals, but designers must also manage to cut and control costs, while adding complexity. A cool look at heat protection CFD is used to predict flow and thermal fields within the engine compartment both at steady state and transient conditions. Hushing hydraulics Researchers from the Georgia Institute of Technology put their energies into novel, compact devices for reducing fluid-borne noise.
2011-08-11
Magazine
Working together to meet Tier 4 requirements Engines and hydraulics are brought together by electronics and software. Turning engineers on- and off Top engineering executives from Daimler Trucks North America lead the technology discussion at this year's SAE Commercial Vehicle Engineering Congress, again covering topics paramount to both on- and off- highway engineers.
2011-03-10
Magazine
Saving space To address packaging constraints in off-highway equipment, engineers developed a fuel vaporizer catalyst that makes for a more compact aftertreatment system. Steering toward safety A look at new technology concepts to overcome design issues inherent in adapting steering angle for heavy-duty applications. A fluid performance Researchers have developed a procedure to measure a fluid's effect on the degree to which mechanical power is efficiently converted to hydraulic power in pumps typical of off-highway applications.
2011-02-04
Magazine
A quiet revolution Optimizing design, while minimizing NVH, in off-highway equipment and systems. Inferential sensing Engineers propose an onboard electronics hardware and software architecture that can deliver condition-based maintenance solutions in a low-cost platform. Lightweight but heavy duty A look at the design, analysis, testing, and application engineering performed to develop a selectively reinforced brake drum made of aluminum metal matrix composite. Shifting gears smoothly Ric Kleine, a 30-year veteran of Cummins Inc. and former SAE Commercial Vehicle VP, seeks continuity over change as he moves into SAE's driver's seat.
Viewing 1 to 30 of 53