Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 534
2017-02-03
Magazine
A greener future for two-wheelers New BS VI emissions standards for two-wheelers are an enviro-opportunity. Additive manufacturing How 3D printing will transform the A&D support chain. Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Advances in lightweight electronics protection Conformal coatings increase reliability of aerospace and military assemblies.
2017-02-02
Magazine
WCX17 Preview The annual SAE World Congress is rebranded WCX17 to express its expanded experience of new-technology discussion and established thought leadership. Achates powers toward production Achates Power's internal-combustion solution is a new play on an old technology. Inside the Bolt EV While the new battery deserves credit for the car's +200-mile range, systems optimization, careful motor design and proprietary CAE tools were equally important. CES 2017: Lush luxury EVs, sophisticated connectivity Suppliers challenge OEMs in advanced tech. Editorial: Question mark or exclamation point Supplier Eye Are you prepared for greater electrification? SAE Standards News VS committees fully engaged on cybersecurity.
2016-12-02
Magazine
Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2016-10-07
Magazine
The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.
2016-10-03
Magazine
All about the engine The University of Wisconsin-Madison team increases engine displacement and implements exhaust gas recirculation to maintain winning ways in SAE Clean Snowmobile Challenge. Fluid mechanics of diesel injection studied at Penn State Special photography method helps student researchers get a better look at spray patterns. Under new management A senior-heavy squad from Minnesota State University, Mankato, takes a different approach to team dynamics and jumps 34 spots to 17th overall at the 2016 Formula SAE Michigan competition.
2016-09-01
Magazine
Solving the Greenhouse Gas puzzle While automakers and policymakers debate the TAR, engineers and product planners prepare for the steep climb to meet GHG and CAFE rules beyond 2022. Revving up thermal characterization in the component lab The latest generation of high-speed infrared cameras can capture airbag deployments and other fast-moving actions quickly and accurately. C3 consortium aims for soot solution A newly formed group of companies led by CFD specialists Convergent Science targets exhaust particulate reduction in the combustion chamber. Inside the autonomous vehicle With less focus on driver needs, comfort, safety, and occupant productivity will become key. Editorial: Bad gas?
2016-08-05
Magazine
Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-08-04
Magazine
Special report: Lightweighting Uncovering the next actions in the industry's grand mass-reduction campaign. CAE's next leap forward With 3D simulations skyrocketing, engineers are looking forward to highly-optimized toolsets to keep pace with complexity. SAE Convergence 2016 Preview Meet the disruptors, network with peers and learn about the latest tech solutions that are rapidly changing the auto industry. "Military-grade" aluminum Jaguar, Exa say simulation to eliminate prototypes by 2020 OEMs expand testing of FEV variable-compression ratio engine Growth of FCVs and EVs tied to infrastructure Bolt EV seat design cuts weight, delights tall passengers Rolls-Royce reveals a Vision of its future Volvo bets on new PowerPulse, not 48V, to attack turbodiesel 'lag' SEAT to spearhead VW's new platform and 48V technology Dr. Jay Baron of CAR discusses vehicle lightweighting and predicts the outcome of the crucial CAFE mid-term review.
2016-08-01
Magazine
Seeing the Light Achieving Full-Color, Day or Night Readability for Flat-Panel Displays Multiple Node Networking Using PCIe Interconnects PCI Express (PCIe) interconnects, and how they can be used to support multiple node low latency data transfers over copper or optical cables, is gaining momentum in embedded computing solutions. Zero-Emissions Electric Aircraft Theory vs Reality Analyzing Radar Signals With Demodulation Combining Software and Hardware for Highly Specialized Multichannel Spectrum Monitoring Advanced Thermal Management Solutions Thermoelectric Cooling Thermal Ground Planes Thermal Management of Laser Diodes The Effect of Substrate Emissivity on the Spectral Emission of a Hot-Gas Overlayer Process Approach to Determining Quality Inspection Deployment Experimental Setup to Assess Blast and Penetration-Induced Secondary Debris in a Military Operations in Urban Terrain (MOUT) Environment Non-Contact Circuit for Real-Time Electric and Magnetic Field Measurements
2016-07-07
Magazine
Technology report Quest for 'new-car smell' dictates interior-materials changes Doing it again-this time with 10 After a successful decade-long collaboration on 6-speed transaxles, Ford and GM partner again on an all-new 10-speed automatic. Here's a look inside the gearbox and the project. Large-scale additive manufacturing for rapid vehicle prototyping A case study from Oak Ridge National Laboratory bridges the 'powertrain-in-the-loop' development process with vehicle systems implementation using big area additive manufacturing (BAAM). Global Vehicles Steel-intensive Mazda CX-9 sheds mass, debuts novel turbo setup
2016-06-03
Magazine
Executive viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2016-05-17
Magazine
Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.
2016-04-08
Magazine
Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.
2016-04-07
Magazine
Defying the disruptors and driving innovation Four top engineering executives discuss how their "traditional" companies are finding new technology opportunities and business growth amid the start-ups-and are even doing some disrupting themselves. Preparing for a 48-volt revival The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Additive manufacturing enhances GTDI pistons Selective Laser Melting may help manufacture future gasoline-engine pistons with enhanced heat-transfer properties and reduced weight.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2016-01-06
Magazine
Time to get personal Industry engineers are combining apps, voice, the cloud, and other technologies such as artificial intelligence to enable drivers to customize their vehicles and anticipate their needs. Technology report GM and TARDEC co-developing fuel cell powered Chevrolet Colorado for military evaluation vehicles and anticipate their needs. Global vehicles Sports cars take center stage in Tokyo
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
2015-12-01
Magazine
Hot-stamping process Hot-stamping process from Schuler employs flexible 'pressure controlled hardening' Fuel cell futures no longer a dream Fuel cell technology is catching up with the hype as fuel cell vehicles become reality. Hot Technologies 2016 Our annual review of significant, innovative, and just plain cool technology applications for the new model year.
2015-10-07
Magazine
HMIs extend beyond the cab Telematics functions are being integrated into multi-function user interfaces. Standards step forward in design of off-highway electronics Functional safety standards are starting to impact many development projects, while the auto industry's AUTOSAR standard is being deployed to help enable software reuse and simplify designs. Leveraging automotive lightweighting techniques to improve off-highway emissions Where systems engineers can gain efficiencies in off-highway equipment is agnostic, they'll take it anywhere, and so they should, but one of the ways, often underestimated, is through the use of strong and lightweight advanced materials. Waste heat recovery for the long haul A WHR system based on an organic Rankine cycle has been developed for a long-haul Iveco Stralis truck.
2015-08-18
Magazine
The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
2015-08-05
Magazine
Making sense of autonomy Industry offers a range of sensors that will free humans from many tasks while also improving reliability, though devising strategies that meet demanding requirements without breaking the bank is no easy challenge. Life-cycle planning-Design and calibration for ultimate efficiency The ultimate power of Big Data technologies relies on the implementation of new strategies. Unlike a traditional engine calibration process, in which only calibration test data and model simulation data are used, multiple source data introduced into the adaptive engine calibration process contributes to efficiency and cost reduction. The complicated future of off-highway engines Developing an optimum engine is getting tricky now that the European Union has established a Stage V for off-highway engines, and the U.S. has not. What effect will this have on future engine designs?
2015-08-03
Magazine
Big Data, aircraft, and a better future Aircraft manufacturers, in particular engine makers, are exploiting the opportunities that come with collecting the vast amount of data available, from customer reports to engine exhaust temperatures. Why is it potentially so useful? What are some of the best ways to use it? Let the good times continue to roll The booming international commercial aviation sector continues to be a bright light leading the future of the aerospace industry.
2015-06-03
Magazine
Executive Viewpoints Off-highway industry executives from companies such as BorgWarner, Perkins, Cummins, and Danfoss reflect upon challenges inside, and outside, the industry, and what technologies, innovations, and strategies will need to be implemented to thrive into the long-term future. 16th Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2015-06-02
Magazine
Balancing GDI fuel economy and emissions Will OEMs have to adopt gasoline particulate filters to comply with stringent new emissions regulations? Top engineers discuss current developments. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Mixing metals Cadillac pursues aluminum/steel mix for new CT6 luxury sedan, leading to advances in body assembly.
2015-04-08
Magazine
Hydraulics still in control of off-highway needs Engineers continue to master electronic controllers and software to help systems manage engine speeds and boost efficiency, to the ultimate benefit of both OEMs and end-users. Off-highway calibration challenges-big and complex As the final set of Tier 4 regulations kick in for engines greater than 750 hp (560 kW), calibration efforts must contend with complex engine and aftertreatment systems. Engine manufacturers and service providers deal with this complexity, but does it need to be so? DEF delivery modelling for SCR systems Researchers characterize a 0-D model of a urea delivery module, oriented to model-based control and to the simulation of the system response to fault injections finalized to diagnosis validation.
2015-03-03
Magazine
Virtual casting improves powertrain design As designers continue to look for ways to cut weight and increase performance, casting simulations are helping optimize designs through faster, more accurate predictions of the casting process used to create key components. Horse racing America's pony cars are a favorite of racers and fans alike, so racing them against each other is natural. SAE 2015 World Congress Preview Tech trends and exhibitor products are highlighted. Tech trends and exhibitor products are highlighted in this special section, which features an exclusive interview with Honda R&D America's Jim Keller. Replicating the racing experience Professional driving simulators can be successfully exploited to shorten the traditional design-prototype testing-production process relative to a new racecar.
2014-11-30
Magazine
Riding on a high Rudi Schurmans and Ben Patel head up Tenneco's suspension and clean air divisions. Ian Adcock discovers what the automotive future holds for them Driverless revolution has begun! Breakthrough Photonic radar promises greater accuracy at lower cost, Ian Adcock discovers Winds of change are here Simulating aerodynamics will make a step-change in vehicle design, as Stephen Remondi, President and CEO of EXA, explains to Ian Adcock
2014-11-12
Magazine
Harley-Davidson's e-bike shocker (video) Is the motorcycle market ready for a Harley-Davidson EV? Project LiveWire was designed to provide answers, said Chief Engineer Jeff Richlen. Airbus has its eye on the future of cleaner flight CleanSky 2 targets are to increase aircraft fuel efficiency enough to reduce CO2 emissions by 20-30% and reduce aircraft NOx and noise emissions by 20-30% compared to newly designed aircraft entering into service in 2014-or essentially halve 2005 CO2 emissions levels by 2050. Soul EV extends the range frontier (video) Specially formulated NCM battery cells are key in giving the vehicle class-leading EV range while enabling engineers to fit a high-energy-density battery pack underfloor with little sacrifice of passenger cabin space.
2014-10-07
Magazine
Outlook for autonomous driving includes cloud Connectivity with off-board data and services and among vehicles will be crucial in maintaining safety and security in future autonomous vehicles. The next wave of crash simulation As computing speed has improved and software itself has made significant speed and performance gains with each release, modeling tools are now quick enough to build high-quality, large, high-detail vehicle models in a very efficient manner. SAE 2014 Convergence preview Interest in advanced driver-assistance technologies is surging, with automotive engineers and decision makers at OEMs and suppliers working feverishly on the convenience vs. safety trade-off and other electronics-related challenges. Cooled EGR shows benefits for gasoline engines Exhaust gas recirculation systems now in use on diesel engines are used mainly to meet emissions regulations. In gasoline engines, they are an appealing way to meet ever more stringent fuel-economy standards
Viewing 1 to 30 of 534