Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 110
2014-08-20
Standard
AIR6056
This AIR describes the current scientific and engineering principles of gas turbine lubricant performance testing per AS5780 and identifies gaps in our understanding of the technology to help the continuous improvement of this specification.
2014-04-08
WIP Standard
J2227
This SAE Information Report lists engine and laboratory tests for service fill engine oils which are associated with specifications and classifications established outside of North America. These specifications and classifications include those developed prior to June 1, 2006 June 1, 2001, by International Technical Societies as well as individual original equipment manufacturers. The information contained within this report applies to engine oils utilized in gasoline and diesel powered automotive vehicles.
2014-04-04
WIP Standard
J357
This SAE Information Report reviews the various physical and chemical properties of engine oils and provides references to test methods and standards used to measure these properties. It also includes general references on the subject of engine oils, base stocks, and additives.
2013-09-04
Standard
J183_201309
This SAE Standard outlines the engine oil performance categories and classifications developed through the efforts of the Alliance of Automobile Manufacturers (Alliance), American Petroleum Institute (API), the American Society for Testing and Materials (ASTM), the Engine Manufacturers Association (EMA), International Lubricant Specification Advisory Committee (ILSAC) and SAE. The verbal descriptions by API and ASTM, along with prescribed test methods and limits are shown for active categories in Table 1 and obsolete categories in Table A1. Appendix A is a historical documentation of the obsolete categories. For purposes of this document, active categories are defined as those (a) for which the required test equipment and test support materials, including reference engine oils and reference fuels, are readily available, (b) for which ASTM or the test developer monitors precision for all tests, and (c) which are currently available for licensing by API EOLCS. The current processes for initiating new classifications were developed through the cooperative efforts of the Alliance, API, ASTM, EMA, ILSAC, and SAE.
2013-06-20
WIP Standard
J300
This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only. Other oil characteristics are not considered or included.
2013-04-02
Standard
J300_201304
This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only. Other oil characteristics are not considered or included.
2013-02-25
Standard
J2361_201302
This SAE Standard covers military engine oils suitable for preservation, break-in, and lubrication of reciprocating internal combustion engines of both spark-ignition and compression-ignition types and of power transmission fluid applications in equipment used in combat/tactical service (see 7.1). This document is equivalent to MIL-L-21260 when all requirements are met.
2013-02-25
Standard
J2359_201302
This SAE Standard covers engine military oils suitable for lubrication of reciprocating internal combustion engines of both spark-ignition and compression-ignition types, and for power transmission fluid applications in combat/tactical service equipment (see 7.1). This document is equivalent to MIL-PRF-2104G when all requirements are met.
2011-08-22
Standard
J1966_201108
This SAE Standard establishes the requirements for lubricating oils containing ashless dispersant additives to be used in four-stroke cycle, reciprocating piston aircraft engines. This document covers the same lubricating oil requirements as the former military specification MIL-L-22851. Users should consult their airframe or engine manufacturers manuals for the latest listing of acceptable lubricants.
2011-08-22
Standard
J1899_201108
This SAE Standard establishes the requirements for lubricating oils containing ashless dispersant additives to be used in four-stroke cycle, reciprocating piston aircraft engines. This document covers the same lubricating oil requirements as the former military specification MIL-L-22851. Users should consult their airframe or engine manufacturers manuals for the latest listing of acceptable lubricants.
2011-08-22
Standard
J1787_201108
This SAE Recommended Practice describes an empirical method for determining the theoretical ash content of aviation piston engine lubricating oils by calculating the equivalent weight of metallic oxides formed at 775 °C based on the metallic elemental concentration. The calculation method of ash determination may be used as an alternate to ASTM D 482 for application to the standards for aviation piston engine lubricating oils.
2011-04-06
Standard
J183_201104
This SAE Standard outlines the engine oil performance categories and classifications developed through the efforts of the Alliance of Automobile Manufacturers (Alliance), American Petroleum Institute (API), the American Society for Testing and Materials (ASTM), the Engine Manufacturers Association (EMA), International Lubricant Standardization and Approval Committee (ILSAC) and SAE. The verbal descriptions by API and ASTM, along with prescribed test methods and limits are shown for active categories in Table 1 and obsolete categories in Table A1. Appendix A is a historical documentation of the obsolete categories. For purposes of this document, active categories are defined as those (a) for which the required test equipment and test support materials, including reference engine oils and reference fuels, are readily available, (b) for which ASTM or the test developer monitors precision for all tests, and (c) which are currently available for licensing by API EOLCS. The current processes for initiating new classifications were developed through the cooperative efforts of the Alliance, API, ASTM, EMA, ILSAC, and SAE.
2011-01-18
Standard
J2227_201101
This SAE Information Report lists engine and laboratory tests for service fill engine oils which are associated with specifications and classifications established outside of North America. These specifications and classifications include those developed prior to June 1, 2006 June 1, 2001, by International Technical Societies as well as individual original equipment manufacturers. The information contained within this report applies to engine oils utilized in gasoline and diesel powered automotive vehicles.
2009-01-12
Standard
J300_200901
This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only. Other oil characteristics are not considered or included.
2008-01-10
Standard
J2363_200801
This SAE Standard describes lubricating oils meeting the physical, chemical and performance requirements of American Petroleum Institute (API) performance categories CF and CF-2, CI 4, supplement CI-4 PLUS, and SAE J300. These oils are suitable for the lubrication of wheeled vehicles with compression-ignition (diesel) engines. This document supersedes the military's Commercial Item Description (CID) A-A-52306.
2008-01-10
Standard
J2362_200801
This SAE Standard describes lubricating oils meeting the physical, chemical, and performance requirements of the American Petroluem Institute (API) SM category and the International Lubricant Standardization and Approval Committee (ILSAC) GF-4 standard. These oils are suitable for the lubrication of spark-ignition engines (gasoline engines). This document supersedes the military's Commercial Item Description (CID) A-A-52039.
2007-11-06
Standard
J300_200711
This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only. Other oil characteristics are not considered or included.
2007-03-26
Standard
J304_200703
The purpose of this SAE Information Report is to describe test conditions and performance evaluation factors for both diesel and gasoline engine tests. Specifically, the tests described in this document are used to measure the engine performance requirements for engine oils described by the API Service Categories described in API Publication 1509, ASTM D 4485, SAE J183 and SAE J1423 standards, U.S. military specifications, and ILSAC GF Standards.
2006-12-13
Standard
J1536_200612
This SAE Recommended Practice is intended for use by engine manufacturers in determining the Fluidity/Miscibility Grades to be recommended for use in their engines, and by oil marketers in formulating and labeling their products.
2006-12-11
Standard
J2227_200612
Scope This SAE Information Report lists engine and laboratory tests for service fill engine oils which are associated with specifications and classifications established outside of North America. These specifications and classifications include those developed prior to June 1, 2006 June 1, 2001, by International Technical Societies as well as individual original equipment manufacturers. The information contained within this report applies to engine oils utilized in gasoline and diesel powered automotive vehicles.
2006-11-06
Standard
J357_200611
This SAE Information Report reviews the various physical and chemical properties of engine oils and provides references to test methods and standards used to measure these properties. It also includes general references on the subject of engine oils, base stocks, and additives.
2006-03-28
Standard
J183_200603
This SAE Standard outlines the engine oil performance categories and classifications developed through the efforts of the Alliance of Automobile Manufacturers (AAM), American Petroleum Institute (API), the American Society for Testing and Materials (ASTM), the Engine Manufacturers Association (EMA), International Lubricant Standardization and Approval committee (ILSAC) and SAE. The verbal descriptions by API and ASTM, along with prescribed test methods and limits are shown for active categories in Table 1 and obsolete categories in Table A1. Appendix A is a historical documentation of the obsolete categories. For purposes of this document, active categories are defined as those (a) for which the required test equipment and test support materials, including reference engine oils and reference fuels, are readily available, (b) for which ASTM or the test developer monitors precision for all tests, and (c) which are currently available for licensing by API EOLCS. The current processes for initiating new classifications were developed through the cooperative efforts of the AAM, API, ASTM, EMA, ILSAC, and SAE.
2005-08-12
Standard
J2363_200508
This SAE Standard describes lubricating oils meeting the physical, chemical and performance requirements of American Petroleum Institute (API) performance categories CF and CF-2, CI 4, supplement CI-4 PLUS, and SAE J300. These oils are suitable for the lubrication of wheeled vehicles with compression-ignition (diesel) engines. This document supersedes the military's Commercial Item Description (CID) A-A-52306.
2005-08-12
Standard
J2362_200508
This SAE Standard describes lubricating oils meeting the physical, chemical, and performance requirements of the American Petroluem Institute (API) SM category and the International Lubricant Standardization and Approval Committee (ILSAC) GF-4 standard. These oils are suitable for the lubrication of spark-ignition engines (gasoline engines). This document supersedes the military's Commercial Item Description (CID) A-A-52039.
2005-08-09
Standard
J1899_200508
This SAE Standard establishes the requirements for lubricating oils containing ashless dispersant additives to be used in four-stroke cycle, reciprocating piston aircraft engines. This document covers the same lubricating oil requirements as the former military specification MIL-L-22851. Users should consult their airframe or engine manufacturers manuals for the latest listing of acceptable lubricants.
2005-07-31
Standard
J1966_200507
This SAE Standard establishes the requirements for nondispersant, mineral lubricating oils to be used in four-stroke cycle piston aircraft engines. This document covers the same lubricating oil requirements as the former military specification MIL-L-6082. Users should consult their airframe or engine manufacturers manuals for the latest listing of acceptable lubricants.
2005-05-04
Standard
J1787_200505
This SAE Recommended Practice describes an empirical method for determining the theoretical ash content of aviation piston engine lubricating oils by calculating the equivalent weight of metallic oxides formed at 775 °C based on the metallic elemental concentration. The calculation method of ash determination may be used as an alternate to ASTM D 482 for application to the standards for aviation piston engine lubricating oils. Field of Application This procedure is recommended for use in the qualification, manufacturing, and quality assurance testing of aviation piston engine lubricating oils where the ash content is limited to a maximum of 0.011%. Background The ash content as measured by ASTM D 482 has very poor precision and repeatability for lubricants having low ash content. The precision statement for the method states that the reproducibility of a sample in the range of 0.001 to 0.079% ash content is 0.005%. Further, the bias of the test cannot be determined and there is no standard reference material containing a known level of ash for this method.
2004-05-10
Standard
J300_200405
This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only. Other oil characteristics are not considered or included.
2003-12-02
Standard
J1423_200312
This SAE Standard was developed cooperatively by SAE, ASTM, and API to define and identify Energy Conserving engine oils for passenger cars, vans, sport utility vehicles, and light-duty (3856 kg [8500 LB] GVW or less) trucks.
2003-07-31
Standard
J2116_200307
This SAE Standard was prepared by Technical Committee 6, Small Engine Lubricants, of the SAE Fuels and Lubricants Division. The intent is to improve communications among engine manufacturers, engine users, and lubricant marketers in describing lubricant performance characteristics. The key objective is to ensure that a correct lubricant is used in each two-stroke-cycle engine.
Viewing 1 to 30 of 110

Filter

  • Standard
    110