Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 31
2017-09-28
Magazine
Advances for off-highway engine design As manufacturers continue to drive out cost and meet a worldwide patchwork of regulatory frameworks, the tools for developing those engines are advancing. From showcase prototypes to advanced analytical techniques, suppliers are helping the cause. Military vehicles battle for autonomy at lower cost Engineers are adding sensors, more powerful micros and faster networks as they automate tasks and pave the way to autonomy. Heavy duty lightweighting Optimization of tractor-trailer systems and component design helps to reduce overall vehicle mass, a key strategy in improving fuel economy and meeting upcoming Phase 2 GHG regulations. Navistar's SuperTruck II explores composites, WiFi to cut weight Methane state of mind New Holland ramps up its focus on alternative fuels, showcasing a methane-powered concept tractor that trims emissions, operating costs.
2016-03-03
Magazine
Multi-material structures move mpg upward The quest to improve fuel economy is not waning, nor is the desire to achieve higher mpg through the use of just the right lightweight material for the right vehicle application. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping. SAE 2016 World Congress Preview Technology trends and exhibitor products are highlighted in this special section, which features Toyota's plans for the show floor, tech sessions, and more.
2015-12-02
Magazine
Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.
2014-11-06
Magazine
Calibration and complexity Off-highway engine applications continue to increase in complexity to meet emissions regulations and fuel economy targets as well as to take advantage of advances in electrification and mechatronics. The model-based calibration process has become the industry standard. ECU advances take many paths Controllers are evolving rapidly, with a range of microcontrollers distributed throughout the vehicle Working remotely A new electrohydraulic steering technology that offers energy efficiency improvement, increased productivity, enhanced safety, and adaptability to operating conditions also has the capacity to support remote operation of a compact wheel loader.
2012-07-05
Magazine
After diesel A look at some offshoots-hybrids, HCCI, and alternative fuels-to the ever-popular diesel engine in the off-highway industry. Software gains (hydraulic) power Development processes are being revised as software becomes a centerpiece of electrohydraulic designs. Virtual sensing gets real As emissions regulations get more strict, emissions measurement must get more precise for onboard diagnostics, engine control, and model-based controller design.
2011-11-03
Magazine
Tier 4 for large bore Engineers show that a pre-turbine aftertreatment system offers clear and distinct benefits in terms of compact, cost-effective emissions reductions. Programmed for safety and reliability The software that adds features and functions is becoming more reliable as standards and new techniques transform design processes. Electrohydraulics improve with new lift-control strategy Fuel consumption, torque delivery, and emissions can all be improved through flexible control of the valve timing, duration, and lift.
2010-01-14
Magazine
Software takes center stage Programs for hydraulics must combine reliability and flexibility. Technical Innovations Carraro launches concept variable transmission transaxle. Original Eqipment Case CE says new crawler dozer offers big performance, not weight.
2009-02-01
Magazine
Whistle down the wire Collaboration between OEMs and suppliers leads to new advances, and challenges, for electrohydraulic system control. Chipping away at drivetrain challenges Chips, sensors, controllers, software all combine to help engineers improve efficiency. Engineering disciplines unite Design tools help disparate groups provide input throughout the development process. Innovative thinking 101 West Virginia University professor Dr. James E. Smith issues a call for innovation as one of the central themes of his term as SAE's 2009 President.
2008-12-01
Magazine
Electrohydraulic engineers embrace integration Software improvements help both engineers and operators as architectures evolve. Indestructible from the start OEMs and suppliers are investing in testing equipment, facilities, and software to ensure proper performance of components prior to being placed in the field. To 2010 and beyond Engineers working on emissions-control systems for heavy-duty engines already are preparing for ever more stringent regulations later next decade. Top Technologies of 2008 The editors look back at some of the most significant technological innovations during the past year according to readers.
2008-03-01
Magazine
In search of the perfect burn The simultaneous download pressures on NOx and PM continue to make research into higher injection pressures and alternative combustion solutions such as homogenous-charge compression ignition attractive. One way to stop a train A new self-energizing electrohydraulic brake offers the advantages of hydraulic brake actuation without the disadvantages of a centralized hydraulic power supply. A model combustion: from art to science Analysis tools, advanced hardware provide insight into combustion process, refining the cylinder's 'big bang.' The datalinked vehicle In the fields and on the job site with GPS.
2007-09-01
Magazine
Digging with precision Electronic technologies continue to transform the off-highway environment, all the way down to the components used to create electrohydraulic systems, including pumps, valves, and new additions, such as house controllers and sensors. Speeding up design Software automates more tasks, handles challenges. Together for a change On- and off-highway commercial vehicle industries converge at fourth-annual Commercial Vehicle Engineering Congress & Exhibition.
2006-10-01
Magazine
Making sense of engines Heavy-duty equipment is known for its ruggedness in harsh environments, but vehicles are not neglecting their sensitive side. The world's fastest digger gets closer JCB's Dieselmax goes 350 mph and teaches engineers much about engine capability, extreme testing, and program management. The whole system, and nothing but the system Properly implemented, an electrohydraulic system can add a great deal of automatic control, advanced performance, advanced diagnostics, and remote monitoring to a mobile application. Regenerative hydraulics The use of multiple hydraulic pumps can satisfy the needs of various circuits in off-highway equipment. The gas is greener Biofuels promise to help reduce petroleum cinsumption and CO2 emissions, but much of the potential depends on production and infrastructure investments. Material returns Effective use of materials information is important to engineers in development of parts and components.
2006-02-01
Magazine
A soft touch Control functions are undergoing a sweeping change as electronics take charge of hydraulic functions, helping to spark substantial growth in software and a shift to distributed intelligence. An engine of one's own How JCB and Ricardo engineered a change in motive power. Gators go robotic John Deere sees opportunities on the battlefield and in the corn field for its intelligent vehicle program. Pyrolytic carbon wet friction materials The characteristics of carbon fabric may provide significant performance advantages in off-highway wet brake and clutch applications. Introducing Greg Henderson, SAE President for 2006 The Lockheed Martin executive steps up to take SAE into its next 100 years.
2005-10-01
Magazine
Hybrids go heavy The payoff for hybrid technology is high for vehicles with hefty payloads. A new era for electrohydraulics More components are designed with electronics in mind. Heavy-duty testing gets SWIFT Wheel-force transducers are helping to provide data-measurement capability faster and more economically than ever before. Operators hail cab upgrades Improving efficiency is new design target.
2004-09-01
Magazine
Digital revolution changing hydraulics Electrohydraulics trim costs while improving safety and efficiency. Heavy-duty testing Targeting off-highway and other commercial vehicle engine makers, Ricardo has expanded its Chicago Technical Center to help them comply with upcoming emissions regulations. An integrating experience The importance of systems integration will be an overarching theme at a new SAE conference, COMVEC, for the on-and off-highway commercial vehicle industries. Off-highway gets cooler and greener An environmentally benign A/C refrigerant rooftop unit is ready for testing in logging and mining equipment in Australia. Mining for better seating The mining site is a particularly challenging environment for vehicles, which combined with the intense work schedule of most mining operations, leads to a serious need for comfort and convenience for equipment operators.
2003-04-01
Magazine
Off-highway braking According to Mico, electrohydraulic braking controls can provide improved performance and add system features difficult to obtain with hydromechanical mechanisms. Keeping quiet Targeting off-highway and heavy-truck OEMs, Blachford claims its new acoustics laboratory will offer some testing capabilities previously only available to the passenger-car market. ADT marketing and manufacturing While it is not debatable that articulated dump trucks are a hot commodity, it is debatable how many are technologically unique. Proportional pressure reducing valves Engineers from Thomas magnete have designed pilot valves that work with electrohydraulics to simplify complex machine control systems.
2002-10-01
Magazine
Including electrohydraulics As electrohydraulics technologies mature and expand, the cost of incorporating them into equipment continues to decrease. Operating the machine As long as people need to be in a machine to run a machine, operator stations will continue to become more operator-friendly.
2001-10-01
Magazine
Semiconductors flex their muscles Makers of semiconductors see the automotive market as a prime opportunity for growth. The first part of this article looks at this growth from the perspective of semiconductor industry leader Motorola. The second part highlights some recent semiconductor product introductions. 2002 supplier technology As automakers increase outsourcing, suppliers are taking on more responsibility for developing increasingly complex systems and components. This special edition of Tech Briefs highlights some of the many supplier contributions to 2002 passenger cars. Vision sensors and the intelligent vehicle Advancements in CMOS imaging sensors have enabled Delphi engineers to adapt low-cost, high-quality cameras for a variety of applications in integrated safety systems. The reborn Thunderbird Taking cues from the 1955 model, the 2002 car benefited from Ford's modern platform and systems engineering as well as C3P computer modeling techniques.
2001-10-01
Magazine
More with less through electronic components Off-highway engineers have had to walk a precarious path in recent years by developing engine technologies that offer customers better vehicle performance and regulators lower emissions. The promises and problems of electrohydraulics Engineers acknowledge that electrohydraulics are the way of the future for the off-highway industry, and that the field itself could use a good public-relations campaign to attract more engineering students. Deere goes all out for agriculture To some, it may seem odd that John Deere picked this particular economy to launch over 50 new products, the most in its 164-year history. To others it reeks of confidence. Switching control in hydraulic drives Researchers from Johannes Kepler University believe agricultural machinery can be improved by further advances in motion generation.
2001-04-01
Magazine
Operator station innovations Off-highway engineers work hard to provide comfort, ease of operation, and reliability to users. As an added challenge, they must design for operators who can spend an entire day working hard in their cab. Designing online Major developments in internet-based technologies are profoundly changing the engineering/design process, revolutionizing the way OEMs and suppliers do business, and speeding the industry's time-to-market. FEA simulation of an electrohydraulic system Researchers from the Milwaukee School of Engineering provide an accurate model of a typical magentic actuator Predicting injury in forklift upsets Researchers from the Biomechanics Institute present test results that demonstrate operators can prevent ejection and injury from a forklift if they are lap-belted and have either a winged seat or hip restraint.
2000-10-01
Magazine
Designing a high-performance electrohydraulic actuator Researchers at the University of Saskatchewan and the University of Toronto adopted a new design strategy for development of a new high-performance acutation system. Off-highway, online The Big Three automakers made big news in February by announcing the formation of a single Internet portal for conducting business-to-business e-commerce. Although no such B2B megasite yet exists for the off-highway industry, a number of separate Internet sites offer similar services to the agricultural and construction segments. Off-highway transient driving cycle Southwest Research Institute and the EPA teamed to determine the necessary emissions tests and certification cycles needed for off-highway engines. Benchmarks in tractor development Norm Swinford discussed the evolution of tractor technology at the 2000 SAE International Off-Highway & Powerplant Congress & Exposition in September.
1954-06-01
Magazine
Viewing 1 to 30 of 31

Filter

  • Magazine
    31