Criteria

Display:

Results

Viewing 1 to 10 of 10
2015-09-10 ...
  • September 10-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 19-20, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The Controller Area Network has become the standard of choice for most automotive manufacturers. Approved for use as an ISO and EPA diagnostic network, its usage continues to grow. This seminar covers the theory and use of the CAN protocol, and its applications in the automotive industry. Details on how the CAN protocol and other standards (J2411, J2284, J1939, ISO 11898, etc.) complement each other will be presented. Attendees will learn about CAN application layers; the latest J1939, J2284, J2411, and IDB standards, regulations, and implementation requirements; and details of device hardware and software interfaces.
2015-09-17 ...
  • September 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • November 11-12, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • May 2-3, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • November 17-18, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Driven by the need for lower emissions, better fuel economy and higher efficiency, hybrid vehicles are appearing in many different configurations on today's roadways. While the powertrain components such as the drive motor, motor controller and cooling system are somewhat familiar to the automotive industry, the battery systems are a relatively unfamiliar aspect. This seminar will introduce participants to the concepts of hybrid vehicles, their missions and the role of batteries in fulfilling those requirements.
2015-09-19 ...
  • September 19, 2015 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • October 1, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • April 1, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 11, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Electric and hybrid vehicles are becoming more visible on today's roadways and the automotive companies are working hard to make these vehicles as transparent as possible to enhance consumer acceptance. The battery system forms a key part of any of these vehicles and is probably the least understood. With practically no moving parts the battery systems show no visible or audible warning of any latent dangers. This seminar will introduce participants to the risks encountered in handling high voltage battery systems and their component parts.
2015-10-08 ...
  • October 8-9, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • March 16-17, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 12-13, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Data acquisition is required throughout the product's life cycle - in prototype performance evaluation, reliability/durability testing, duty-cycle analysis, end of line testing, and service and aftermarket product areas. Both lab and on-road testing are needed for components, sub-systems and entire vehicles. As in-vehicle networks become increasingly more sophisticated in terms of the number of controllers, the speed at which they communicate, and the number of parameters available, they are a virtual goldmine for the test engineer.
2016-04-12 ...
  • April 12-13, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 3-4, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The advent of digital computers and the availability of ever cheaper and faster micro processors have brought a tremendous amount of control system applications to the automotive industry in the last two decades. From engine and transmission systems, to virtually all chassis subsystems (brakes, suspensions, and steering), some level of computer control is present. Control systems theory is also being applied to comfort systems such as climate control and safety systems such as cruise control or collision mitigation systems.
2016-04-28 ...
  • April 28-29, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
This two-day seminar covers the theory and practices of in-vehicle multiplex networking. Attendees learn about FlexRay and LIN SubBus, and other network standards. Attendees explore the latest OBD II regulations and implementation requirements, along with device hardware and software interfaces. Proprietary applications are discussed and system development tools are demonstrated. In addition to the seminar handout, participants will receive a copy of the J2602-1 standard.
Training / Education Classroom Seminars
It is important for electronic and hardware engineers to not only be knowledgeable of a product's intended function and performance, but also its ability to perform within electromagnetic compatibility (EMC) limits. This seminar introduces practical shielding theory, design fundamentals, and configurations, including shielding products, common and differential modes, electromagnetic fields, and enclosure shielding.
Training / Education Classroom Seminars
With the increase in vehicle electronics, the need to gather data from the vehicle has never been greater. From vehicle development, through vehicle test to vehicle validation, engineers are required to collect data from the vehicle's network. The SAE J2534-1 API (Recommended Practice for Pass-Thru Vehicle Programming) gives engineers the tool to collect vehicle data from multiple network types including CAN, ISO15765, J1850, ISO9141 and Chrysler SCI, using standard J2534 interface devices. In addition, the aftermarket can access the vehicle's OBDII information from the diagnostic connector.
Training / Education Classroom Seminars
The technical difficulty, time, and costs associated with deploying a successful telematics system are often underestimated. This seminar provides participants a comprehensive overview of the various technologies that make up a telematics system as a whole and provides the information necessary to help drive intelligent decisions that have long-term benefits. This two-day seminar will begin with a review of the origins, technologies, and systems used in creating and operating modern-day telematics systems.
Training / Education Classroom Seminars
Modern engineering challenges and their solutions are often multidisciplinary in nature. Systems in today's vehicles integrate mechanical, electronic, hydraulic, as well as various other components all working together in a synergistic manner. While progress is being made in lowering the barriers between traditional engineering disciplines and formal education programs, this seminar is designed to provide engineers with mechanical or electrical engineering backgrounds the knowledge to effectively interact with colleagues from the other discipline in an efficient and productive manner.
Viewing 1 to 10 of 10