Criteria

Text:
Category:
Display:

Results

Viewing 1 to 29 of 29
2016-10-03 ...
  • October 3-4, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The advent of digital computers and the availability of ever cheaper and faster micro processors have brought a tremendous amount of control system applications to the automotive industry in the last two decades. From engine and transmission systems, to virtually all chassis subsystems (brakes, suspensions, and steering), some level of computer control is present. Control systems theory is also being applied to comfort systems such as climate control and safety systems such as cruise control or collision mitigation systems.
2016-10-11 ...
  • October 11, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Electric and hybrid vehicles are becoming more visible on today's roadways and the automotive companies are working hard to make these vehicles as transparent as possible to enhance consumer acceptance. The battery system forms a key part of any of these vehicles and is probably the least understood. With practically no moving parts the battery systems show no visible or audible warning of any latent dangers. This seminar will introduce participants to the risks encountered in handling high voltage battery systems and their component parts.
2016-10-12 ...
  • October 12-13, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Data acquisition is required throughout the product's life cycle - in prototype performance evaluation, reliability/durability testing, duty-cycle analysis, end of line testing, and service and aftermarket product areas. Both lab and on-road testing are needed for components, sub-systems and entire vehicles. As in-vehicle networks become increasingly more sophisticated in terms of the number of controllers, the speed at which they communicate, and the number of parameters available, they are a virtual goldmine for the test engineer.
2016-10-17 ...
  • October 17-21, 2016 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
Training / Education Classroom Engineering Academies
Tuning the various electronic variables to ensure that a vehicle's engine performs according to its mission profile ultimately relies upon a competent calibrator. Because proper calibration is such a critical aspect of customer satisfaction, skilled calibrators are in high demand in the auto industry. This Academy is designed to provide a foundation for those interested in becoming calibration engineers. Starting with an introduction to calibration and calibration tools, this Academy covers a range of topics that will provide learners with an understanding of general calibration work flow.
2016-10-25 ...
  • October 25, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The In-Vehicle user environment is transitioning from fixed dedicated features to an extensible connected interface that can dramatically increase complexity faced by the driver. This course will provide a systematic design method to develop intuitive and safe vehicle interface solutions. Participants will learn user interaction design steps, tools, and the team synergies required to develop an interface from concept to the final product. The course will use exercises to practice interface design, with example interfaces to cover lessons learned.
2016-10-25 ...
  • October 25-26, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Organizations are becoming increasingly aware of the importance of developing secure software. This seminar introduces students to the concepts of software assurance which have direct application in all software industries, including automotive and aerospace sectors. The intent of this seminar is to give students an appreciation of the technical challenges associated with software assurance while developing the technical skills necessary to engineer secure software. Performing input validation is imperative when developing secure software systems as this seminar will demonstrate.
2016-10-27 ...
  • October 27-28, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Embedded hardware is everywhere you look today from your vehicle’s infotainment system to refrigerator to medical devices and everything else in-between. With so much exposure one would think that such devices are secure against attack; however, sadly for a large number of devices this is not the case. For proof, just look no further than your local news reports. They are full of reports on devices being hacked into. So, as engineers, how do we go about first identifying and mitigating (or capitalizing) the potential security vulnerabilities within these devices?
2016-11-16 ...
  • November 16-18, 2016 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
On-board diagnosis of engine and transmission systems has been mandated by government regulation for light and medium vehicles since the 1996 model year. The regulations specify many of the detailed features that on-board diagnostics must exhibit. In addition, the penalties for not meeting the requirements or providing in-field remedies can be very expensive. This course is designed to provide a fundamental understanding of how and why OBD systems function and the technical features that a diagnostic should have in order to ensure compliant and successful implementation.
2016-11-17 ...
  • November 17-18, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Driven by the need for lower emissions, better fuel economy and higher efficiency, hybrid vehicles are appearing in many different configurations on today's roadways. While the powertrain components such as the drive motor, motor controller and cooling system are somewhat familiar to the automotive industry, the battery systems are a relatively unfamiliar aspect. This seminar will introduce participants to the concepts of hybrid vehicles, their missions and the role of batteries in fulfilling those requirements.
2016-11-29 ...
  • November 29-30, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Every year, the U.S. experiences more than 32,000 traffic deaths and over 3.8 million crash injuries. While the trend in traffic deaths has been downward for the past decade, most of this reduction has been the result of optimizing passive occupant crash protection systems such as seatbelts and airbags. Advanced driver assistance systems (ADAS) now offer the potential to significantly reduce or eliminate most vehicle crashes by perceiving a dangerous situation before the crash has occurred and taking action to avoid or mitigate the crash.
2016-11-30 ...
  • November 30, 2016 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The automotive industry is the new "battleground" for cybersecurity. Following the path of desktops/laptops, tablets, and mobile phones, the automotive industry is now the "hot" area for both academic researchers and hackers. This will transform the automotive industry just as it transformed traditional information technology and the mobile markets; it is inescapable, but it can be beneficial and a well prepared company can find significant benefit in being a market leader. What does cybersecurity mean? Who is attacking and why? What must we change? What can stay the same? What is the larger organization's role in cyber?
2016-12-05 ...
  • December 5-6, 2016 (8:30 a.m. - 4:30 p.m.) - Norwalk, California
Training / Education Classroom Seminars
The international standard titled DO-178C - Software Considerations in Airborne Systems and Equipment Certification is the primary standard for commercial avionics software development. This standard provides recommendations for the production of airborne systems and equipment software. Compliance with the objectives of DO-178C is the primary means for meeting airworthiness requirements and obtaining approval of software used in civil aviation products. This two-day seminar will introduce attendees to industry best practices for real-world software development and how to avoid common DO-178C mistakes.
Training / Education Classroom Seminars
With the increase in vehicle electronics, the need to gather data from the vehicle has never been greater. From vehicle development, through vehicle test to vehicle validation, engineers are required to collect data from the vehicle's network. The SAE J2534-1 API (Recommended Practice for Pass-Thru Vehicle Programming) gives engineers the tool to collect vehicle data from multiple network types including CAN, ISO15765, J1850, ISO9141 and Chrysler SCI, using standard J2534 interface devices. In addition, the aftermarket can access the vehicle's OBDII information from the diagnostic connector.
Training / Education Classroom Seminars
Attend SAE Convergence 2016 for 25% off the classic member rate when you pay separate registration for the September 21, 2016 offering of this seminar being held in conjunction with SAE Convergence 2016! Contact SAE Customer Service at 1-877-606-7323 or 724-776-4970 to take advantage of this special offer. This seminar addresses vehicle positioning and navigation systems. The first part of the seminar provides an overview of the Global Positioning System (GPS) since it is the main location technology enabler for automotive location-based applications.
Training / Education Classroom Seminars
The technical difficulty, time, and costs associated with deploying a successful telematics system are often underestimated. This seminar provides participants a comprehensive overview of the various technologies that make up a telematics system as a whole and provides the information necessary to help drive intelligent decisions that have long-term benefits. This two-day seminar will begin with a review of the origins, technologies, and systems used in creating and operating modern-day telematics systems.
Training / Education Classroom Seminars
This four-hour short course intends to present an overview of electrically powered flight control actuation systems, covering commercial applications. The scope covers issues related to the mechanical design of actuators themselves, with limited reference to their control electronics. Additionally, this course will provide participants an understanding of the design considerations behind these actuation systems.
Training / Education Classroom Seminars
ARP4761 describes guidelines and methods for performing safety assessments. This recommended practice is associated with showing compliance with certification requirements (14CFR/CS Parts 23 and 25, section 1309) and assisting a company in meeting their own internal safety standards. The safety processes described are primarily associated with civil airborne equipment but the processes and tools may be applied to many applications.
Training / Education Classroom Seminars
The Controller Area Network has become the standard of choice for most automotive manufacturers. Approved for use as an ISO and EPA diagnostic network, its usage continues to grow. This seminar covers the theory and use of the CAN protocol, and its applications in the automotive industry. Details on how the CAN protocol and other standards (J2411, J2284, J1939, ISO 11898, etc.) complement each other will be presented. Attendees will learn about CAN application layers; the latest J1939, J2284, J2411, and IDB standards, regulations, and implementation requirements; and details of device hardware and software interfaces.
Training / Education Classroom Seminars
This two-day seminar covers the theory and practices of in-vehicle multiplex networking. Attendees learn about FlexRay and LIN SubBus, and other network standards. Attendees explore the latest OBD II regulations and implementation requirements, along with device hardware and software interfaces. Proprietary applications are discussed and system development tools are demonstrated. In addition to the seminar handout, participants will receive a copy of the J2602-1 standard.
Training / Education Classroom Seminars
On-board diagnostics, required by governmental regulations, provide a means for reducing harmful pollutants into the environment. Since being mandated in 1996, the regulations have continued to evolve and require engineers to design systems that meet strict guidelines. This one day seminar is designed to provide an overview of the fundamental design objectives and the features needed to achieve those objectives for generic on-board diagnostics. The basic structure of an on-board diagnostic will be described along with the system definitions needed for successful implementation.
Training / Education Classroom Seminars
Counterfeit electronic parts have been found in almost every sector of the electronics industry and continue to be an increasing threat to electronic hardware. This threat poses significant performance, reliability and safety risks. Aerospace industry organizations, in particular, must produce and continually improve safe and reliable products that meet or exceed customer and regulatory authority requirements.
Training / Education Classroom Seminars
Modern engineering challenges and their solutions are often multidisciplinary in nature. Systems in today's vehicles integrate mechanical, electronic, hydraulic, as well as various other components all working together in a synergistic manner. While progress is being made in lowering the barriers between traditional engineering disciplines and formal education programs, this seminar is designed to provide engineers with mechanical or electrical engineering backgrounds the knowledge to effectively interact with colleagues from the other discipline in an efficient and productive manner.
Training / Education Classroom Seminars
Connected Vehicle Professional I - Function, Protocols and Architecture will focus on connected vehicle application concepts and vision, performance functions, communication protocols, hardware architecture components and software architecture methodologies within the connected vehicle ecosystems. To ensure a globally informed awareness, learners will be presented with in-depth wide ranging course materials, suggested domestic and internationally source reading resources, and tested on various key areas of instruction.
Training / Education Classroom Seminars
It is important for electronic and hardware engineers to not only be knowledgeable of a product's intended function and performance, but also its ability to perform within electromagnetic compatibility (EMC) limits. This seminar introduces practical shielding theory, design fundamentals, and configurations, including shielding products, common and differential modes, electromagnetic fields, and enclosure shielding.
Training / Education Classroom Seminars
Attend SAE Convergence 2016 for 25% off the classic member rate when you pay separate registration for the September 21, 2016 offering of this seminar being held in conjunction with SAE Convergence 2016! Contact SAE Customer Service at 1-877-606-7323 or 724-776-4970 to take advantage of this special offer. Wireless communication is a key enabler for vehicle connectivity. This seminar provides participants with an engineering overview of the various technologies that comprise a wireless communication system as it relates to automotive and commercial vehicle applications.
Training / Education Classroom Seminars
SAE International is pleased to offer this professional development seminar in conjunction with the Joint Technical Committee Week combining the SAE A-5 Aerospace Landing Gear Systems and SAE A-6 Aerospace Actuation, Control and Fluid Power Systems Committee meetings scheduled for October 26 - 30, 2015 in Honolulu, Hawaii. This four hour short course will provide an overview of design considerations for electrohydrostatic actuation for transport and business aircraft applications. The instructor will present the critical topics of electrohydrostatic actuation (EHA) from a systems development perspective (V-Approach).
Training / Education Classroom Seminars
This four-hour short course intends to present an overview of electrohydraulic flow control servovalves commonly used in flight control and utility actuators. The scope of this course covers the history and design of servovalves, as well as their most common performance characteristics. This course will provide participants an understanding of the application of electrohydraulic servovalves in hydraulically powered actuators and preparation of the servovalve procurement specification.
Training / Education Classroom Seminars
New energy requirements for China’s vehicle market are significantly increasing battery system development. This rapid increase in battery development is elevating the importance of optimized battery system design, integration, and validation. Once the vehicle platform is determined, the vehicle must realize benefits from an optimized battery system design that includes enhanced acceleration speed, stable performance, long life, and desired range.
Training / Education Classroom Seminars
There are no offerings of this program currently scheduled. Contact our partner, Mobile Comply, at 1-866-379-2472 for more information on upcoming offerings. Connected Vehicle Professional II – Standards, Organizations, Programs, V2X emphasizes connected vehicle standards from various organizations such as SAE, IEEE and other standardization groups. This also exposes learners to multiple organizations and programs recognized throughout the industry. Emphasis for this class is on Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I), Vehicle-to-Data (V2D) technologies.
Viewing 1 to 29 of 29