Criteria

Text:
Display:

Results

Viewing 1 to 30 of 36
2017-10-26 ...
  • October 26-27, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
Training / Education Classroom Seminars
This course is offered in China only. More and more stringent emission and fuel consumption regulations are pushing the automotive industry towards electrified powertrain and electrified vehicles. This is particularly evident in China, where there is an increased demand for electric (EV) and hybrid electric vehicles (HEV). Infrastructure is being built across the country for convenient charging. It must now be determined how to meet the technical targets for EV/HEV regulations under economic constraints and how to best develop the major ePowertrain components (battery and motor).
2017-09-25 ...
  • September 25, 2017 (8:30 a.m. - 4:30 p.m.) - Garden Grove, California
Training / Education Classroom Seminars
On-board diagnostics, required by governmental regulations, provide a means for reducing harmful pollutants into the environment. Since being mandated in 1996, the regulations have continued to evolve and require engineers to design systems that meet strict guidelines. This one day seminar is designed to provide an overview of the fundamental design objectives and the features needed to achieve those objectives for generic on-board diagnostics. The basic structure of an on-board diagnostic will be described along with the system definitions needed for successful implementation.
2017-09-25 ...
  • September 25-29, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
  • October 16-20, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
  • November 6-10, 2017 (8:30 a.m. - 4:30 p.m.) - Pontiac, Michigan
Training / Education Classroom Engineering Academies
Tuning the multiple electronic variables to ensure that a vehicle's engine performs according to its mission profile ultimately relies upon a competent calibrator. Because proper calibration is such a critical aspect of customer satisfaction, skilled calibrators are in high demand in the auto industry. This Academy is designed to provide a foundation for those interested in becoming calibration engineers. Starting with an introduction to calibration and calibration tools, this Academy covers a range of topics that will provide learners with an understanding of general calibration work flow.
2017-06-15 ...
  • June 15-16, 2017 (8:30 a.m. - 4:30 p.m.) - Grand Rapids, Michigan
Training / Education Classroom Seminars
Signal processing has become a critical tool in optimizing vehicle noise. This seminar will help you to understand the foundation common to all NVH data acquisition equipment including digitizing, windows, aliasing, averaging techniques, and common analysis functions such as the power spectrum, transfer function and coherence. Fundamental concepts such as filtering, modulation, convolution, and correlation, as well as specialized techniques used in rotating machinery such as adaptive re-sampling and order tracking, will be covered.
2017-06-01 ...
  • June 1-2, 2017 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • June 5-6, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • October 30-31, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
Training / Education Classroom Seminars
The international standard titled DO-178C - Software Considerations in Airborne Systems and Equipment Certification is the primary standard for commercial avionics software development. This standard provides recommendations for the production of airborne systems and equipment software. Compliance with the objectives of DO-178C is the primary means for meeting airworthiness requirements and obtaining approval of software used in civil aviation products. This two-day seminar will introduce attendees to industry best practices for real-world software development and how to avoid common DO-178C mistakes.
2017-05-11 ...
  • May 11-12, 2017 (8:30 a.m. - 4:30 p.m.) - Cleveland, Ohio
  • June 8-9, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
  • October 19-20, 2017 (8:30 a.m. - 4:30 p.m.) - Farmington, Connecticut
Training / Education Classroom Seminars
ARP4761 describes guidelines and methods for performing safety assessments. This recommended practice is associated with showing compliance with certification requirements (14CFR/CS Parts 23 and 25, section 1309) and assisting a company in meeting their own internal safety standards. The safety processes described are primarily associated with civil airborne equipment but the processes and tools may be applied to many applications.
2017-05-08 ...
  • May 8-12, 2017 (3 Sessions) - Live Online
  • August 21-25, 2017 (3 Sessions) - Live Online
  • November 27-December 1, 2017 (3 Sessions) - Live Online
Training / Education Online Web Seminars
Connected vehicles are increasingly seen as a target for cybersecurity attacks. A key differentiator for the automotive industry is the use of cyber-physical systems, where a successful cybersecurity attack can affect physical entities. Often involving embedded electronics and real time control, these systems require different solutions in addition to established IT security principles and reactive responses to threats. Cybersecurity needs to be designed and built into cyber-physical systems throughout the development lifecycle to provide defense in depth.
2017-05-04 ...
  • May 4, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 26, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Electric and hybrid vehicles are becoming more visible on today's roadways and the automotive companies are working hard to make these vehicles as transparent as possible to enhance consumer acceptance. The battery system forms a key part of any of these vehicles and is probably the least understood. With practically no moving parts the battery systems show no visible or audible warning of any latent dangers. This seminar will introduce participants to the risks encountered in handling high voltage battery systems and their component parts.
2017-05-02 ...
  • May 2-3, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 24-25, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Driven by the need for lower emissions, better fuel economy and higher efficiency, hybrid vehicles are appearing in many different configurations on today's roadways. While the powertrain components such as the drive motor, motor controller and cooling system are somewhat familiar to the automotive industry, the battery systems are a relatively unfamiliar aspect. This seminar will introduce participants to the concepts of hybrid vehicles, their missions and the role of batteries in fulfilling those requirements.
2017-04-26 ...
  • April 26-27, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 18-19, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Organizations are becoming increasingly aware of the importance of developing secure software. This seminar introduces students to the concepts of software assurance which have direct application in all software industries, including automotive and aerospace sectors. The intent of this seminar is to give students an appreciation of the technical challenges associated with software assurance while developing the technical skills necessary to engineer secure software. Performing input validation is imperative when developing secure software systems as this seminar will demonstrate.
2017-04-24 ...
  • April 24-25, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 16-17, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Embedded hardware is everywhere you look today from your vehicle’s infotainment system to refrigerator to medical devices and everything else in-between. With so much exposure one would think that such devices are secure against attack; however, sadly for a large number of devices this is not the case. For proof, just look no further than your local news reports. They are full of reports on devices being hacked into. So, as engineers, how do we go about first identifying and mitigating (or capitalizing) the potential security vulnerabilities within these devices?
2017-04-21 ...
  • April 21-22, 2017 (8:30 a.m. - 4:30 p.m.) - Shanghai, China
Training / Education Classroom Seminars
New energy requirements for China’s vehicle market are significantly increasing battery system development. This rapid increase in battery development is elevating the importance of optimized battery system design, integration, and validation. Once the vehicle platform is determined, the vehicle must realize benefits from an optimized battery system design that includes enhanced acceleration speed, stable performance, long life, and desired range.
2017-04-20 ...
  • April 20-21, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • October 12-13, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Data acquisition is required throughout the product's life cycle - in prototype performance evaluation, reliability/durability testing, duty-cycle analysis, end of line testing, and service and aftermarket product areas. Both lab and on-road testing are needed for components, sub-systems and entire vehicles. As in-vehicle networks become increasingly more sophisticated in terms of the number of controllers, the speed at which they communicate, and the number of parameters available, they are a virtual goldmine for the test engineer.
2017-04-03 ...
  • April 3-5, 2017 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
  • November 13-15, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
On-board diagnosis of engine and transmission systems has been mandated by government regulation for light and medium vehicles since the 1996 model year. The regulations specify many of the detailed features that on-board diagnostics must exhibit. In addition, the penalties for not meeting the requirements or providing in-field remedies can be very expensive. This course is designed to provide a fundamental understanding of how and why OBD systems function and the technical features that a diagnostic should have in order to ensure compliant and successful implementation.
2017-04-03 ...
  • April 3-4, 2017 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
Training / Education Classroom Seminars
Every year, the U.S. experiences more than 32,000 traffic deaths and over 3.8 million crash injuries. While the trend in traffic deaths has been downward for the past decade, most of this reduction has been the result of optimizing passive occupant crash protection systems such as seatbelts and airbags. Advanced driver assistance systems (ADAS) now offer the potential to significantly reduce or eliminate most vehicle crashes by perceiving a dangerous situation before the crash has occurred and taking action to avoid or mitigate the crash.
2017-04-03 ...
  • April 3, 2017 (8:30 a.m. - 4:30 p.m.) - Detroit, Michigan
Training / Education Classroom Seminars
The automotive industry is the new "battleground" for cybersecurity. Following the path of desktops/laptops, tablets, and mobile phones, the automotive industry is now the "hot" area for both academic researchers and hackers. This will transform the automotive industry just as it transformed traditional information technology and the mobile markets; it is inescapable, but it can be beneficial and a well prepared company can find significant benefit in being a market leader. What does cybersecurity mean? Who is attacking and why? What must we change? What can stay the same? What is the larger organization's role in cyber?
2017-03-21 ...
  • March 21-23, 2017 (2 Sessions) - Live Online
  • August 22-24, 2017 (2 Sessions) - Live Online
  • November 15-17, 2017 (2 Sessions) - Live Online
Training / Education Online Web Seminars
ISO 26262: Road Vehicle - Functional Safety is now becoming a condition of compliance for doing business in the automotive sector. The Scope states: “ISO 26262 is intended to be applied to safety-related systems that include one or more electrical and/or electronic (E/E) systems and that are installed in series production passenger cars with a maximum gross vehicle mass up to 3,500 kg…" This course provides background for reading and applying the standard and explains its scope, the major differences from the general safety standard IEC 61508, and how the scope changes with the introduction of new systems.
2017-03-16 ...
  • March 16-17, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 14-15, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The advent of digital computers and the availability of ever cheaper and faster micro processors have brought a tremendous amount of control system applications to the automotive industry in the last two decades. From engine and transmission systems, to virtually all chassis subsystems (brakes, suspensions, and steering), some level of computer control is present. Control systems theory is also being applied to comfort systems such as climate control and safety systems such as cruise control or collision mitigation systems.
2017-03-06 ...
  • March 6-7, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • September 28-29, 2017 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
The Controller Area Network has become the standard of choice for most automotive manufacturers. Approved for use as an ISO and EPA diagnostic network, its usage continues to grow. This seminar covers the theory and use of the CAN protocol, and its applications in the automotive industry. Details on how the CAN protocol and other standards (J2411, J2284, J1939, ISO 11898, etc.) complement each other will be presented. Attendees will learn about CAN application layers; the latest J1939, J2284, J2411, and IDB standards, regulations, and implementation requirements; and details of device hardware and software interfaces.
2017-02-28 ...
  • February 28, 2017 (1 Session) - Live Online
Training / Education Online Web Seminars
The path to commercialization of plug-in hybrids is likely to require complex interactions between OEMs, battery manufacturers, electric utilities, and government, yet the plug-in hybrid is a still-developing technology. How do plug-in hybrids (PHEVs) differ from conventional hybrids? What are the advantages and challenges for vehicle manufacturers, public utilities, energy and environmental concerns, and end-users? What is the current state of plug-in hybrid development?
Training / Education Classroom Seminars
March 20-24, 2017 July 24- 28, 2017 September 11- 15, 2017 November 13-17, 2017 Connected Vehicle Professional II – Standards, Organizations, Programs, V2X emphasizes connected vehicle standards from various organizations such as SAE, IEEE and other standardization groups. This also exposes learners to multiple organizations and programs recognized throughout the industry. Emphasis for this class is on Vehicle-to-Vehicle (V2V), Vehicle-to-Infrastructure (V2I), Vehicle-to-Data (V2D) technologies.
Training / Education Classroom Seminars
March 6-10, 2017 May 15-19, 2017 July 10-14, 2017 November 6-10, 2017 Connected Vehicle Professional I - Function, Protocols and Architecture will focus on connected vehicle application concepts and vision, performance functions, communication protocols, hardware architecture components and software architecture methodologies within the connected vehicle ecosystems. To ensure a globally informed awareness, learners will be presented with in-depth wide ranging course materials, suggested domestic and internationally source reading resources, and tested on various key areas of instruction.
Anytime
Training / Education On Demand Web Seminar RePlay
The path to commercialization of plug-in hybrids is likely to require complex interactions between OEMs, battery manufacturers, electric utilities, and government, yet the plug-in hybrid is a still-developing technology. How do plug-in hybrids (PHEVs) differ from conventional hybrids? What are the advantages and challenges for vehicle manufacturers, public utilities, energy and environmental concerns, and end-users? What is the current state of plug-in hybrid development?
Training / Education Classroom Seminars
This four-hour short course intends to present an overview of electrically powered flight control actuation systems, covering commercial applications. The scope covers issues related to the mechanical design of actuators themselves, with limited reference to their control electronics. Additionally, this course will provide participants an understanding of the design considerations behind these actuation systems.
Training / Education Classroom Seminars
This seminar addresses vehicle positioning and navigation systems. The first part of the seminar provides an overview of the Global Positioning System (GPS) since it is the main location technology enabler for automotive location-based applications.
Training / Education Classroom Seminars
Wireless communication is a key enabler for vehicle connectivity. This seminar provides participants with an engineering overview of the various technologies that comprise a wireless communication system as it relates to automotive and commercial vehicle applications. It is intended to develop the skill set necessary for an educated understanding of the challenges and opportunities related to Connected Vehicles and connected applications. This lecture contains three sections: Section One provides an immersion in the fundamentals of wireless communications.
Anytime
Training / Education On Demand Ford Online Course
The Ford Powertrain Controls (PTC) online course introduces the critical role the powertrain controls system plays in providing excellent vehicle performance, fuel economy, driveability, and emissions. The course describes the powertrain controls system components, including sensors and actuators. The information is presented from a functional, interface diagram, and p-diagram perspective, to enable reliable and robust powertrain operation. In addition, the course emphasizes powertrain controls interactions with internal and external interfaces.
Anytime
Training / Education On Demand Ford Online Course
Powertrain as-installed subsystems have a common fundamental function to perform in harmony, enabling the engine to power the vehicle and/or accessories. There is a need to avoid issues such as idle roughness and to realize these are system interaction issues. For example, modal alignment affects idle roughness, and improving idle roughness can affect fuel economy. This 8-hour Ford online course describes the function and major interfaces of powertrain as-installed driveline subsystems. It also discusses Design Verification System (DVS) metrics/performance requirements for each subsystem and how each subsystem affects other subsystems.
Anytime
Training / Education On Demand Ford Online Course
Powertrain as-installed subsystems have a common fundamental function to perform in harmony, enabling the engine to power the vehicle and/or accessories. There is a need to avoid issues such as idle roughness and to realize these are system interaction issues. For example, modal alignment affects idle roughness, and improving idle roughness can affect fuel economy. This 12-hour Ford online course discusses hardware design, function, and major interfaces of powertrain as-installed stationary subsystems.
Training / Education Classroom Seminars
The technical difficulty, time, and costs associated with deploying a successful telematics system are often underestimated. This seminar provides participants a comprehensive overview of the various technologies that make up a telematics system as a whole and provides the information necessary to help drive intelligent decisions that have long-term benefits. This two-day seminar will begin with a review of the origins, technologies, and systems used in creating and operating modern-day telematics systems.
Viewing 1 to 30 of 36