Criteria

Text:
Sector:
Content:
Display:

Results

Viewing 1 to 30 of 4495
CURRENT
2017-11-21
Standard
ARP6807
The intent of the SAE Aerospace Recommended Practice (ARP) is to provide a process for users to identify the part number of AS7928 terminal lugs installed in civilian or military applications, although it can also can be used to identify terminals that have been stored incorrectly. This ARP is subject to change to keep pace with experience and technical advances of AS7928 terminals. A current set of tables are provided to list and identify current AS7928 terminal lug configurations per the associated specification detail sheet and terminal lug configuration. Specific configuration details, graphic, size and marking information for each individual terminal lug is provided to assist the product user with accurate selection for replacement or identification.
CURRENT
2017-11-21
Standard
AS6294/1
This document establishes common industry practices and recommended screening, qualification, and lot acceptance testing of Plastic Encapsulated Microcircuits (PEMs) for use in space application environments.
2017-11-15
WIP Standard
AIR1662B
This SAE Aerospace Information Report (AIR) provides background information, technical data and related technical references for minimization of electrostatic hazards in aircraft fuel systems. Techniques used to minimize the electrostatic hazard include: a. Reducing fueling rate into tank bays including use of multiple refueling inlet nozzles. b. Reducing refuel plumbingn flow velocities. c. Introducing fuel into the tank at a low velocity near the bottom and directing it to impinge upon a grounded conducting surface. d. Avoiding electrically isolated conductors in the fuel tank. e. Using conductivity additives in the fuel.
CURRENT
2017-11-15
Standard
AS6324
AS6324 specifies the requirements for comparative testing of new copper and copper alloy conductors to AS29606 qualified conductors. AS29606 approved conductors are used for the construction of insulated wire defined in SAE Aerospace wire standards (i.e., AS22759, AS81044, etc.). AS6324 defines testing which meets or exceeds the minimum test requirements of AS29606 and AS22759 and its detailed specification sheets.
CURRENT
2017-11-14
Standard
ARP4005C
This SAE Aerospace Recommended Practice (ARP) provides information to guide in the selection of electromechanical relays to be used in electrical/electronic circuits for application in aerospace, ground, and shipboard systems to achieve proper performance.
2017-11-13
WIP Standard
AIR6514A
This interface control document (ICD) specifies all software services in the Unmanned Systems (UxS) Control Segment Architecture, including interfaces, messages, and data model.
2017-11-13
WIP Standard
AS5259/6B
Not available.
2017-11-13
WIP Standard
AS6522A
The UCS technical governance comprises a set of policies, processes, and standard definitions to establish consistency and quality in the development of architecture artifacts and documents. It provides guidance for the use of adopted industry standards and modeling conventions in the use of Unified Modeling Language (UML) and Service Oriented Architecture Modeling Language (SoaML), including where the UCS Architecture deviates from normal UML conventions. This document identifies the defining policies, guidelines, and standards of technical governance in the following subjects: - Industry standards adopted by the AS-4UCS Technical Committee: These are the industry standards and specifications adopted by AS-4UCS in the generation and documentation of the architecture. - UCS Architecture Development: UCS specific policies on the development of the UCS Architecture. The AS-4UCS Technical Committee governance policies are intentionally minimal.
CURRENT
2017-11-09
Standard
AS81582C
This specification covers environment-resisting, quick disconnect, EMI/RFI shielded and non-shielded umbilical, electric connectors and adapter assemblies with removable crimp or nonremovable solder-type contacts and accessories. Connectors are rated for operation from -55 °C (-67 °F) to 200 °C (392 °F). Adapter assemblies are rated for operation from -55 °C (-67 °F) to 125 °C (257 °F). The upper temperature is the maximum internal hot spot temperature resulting from any combination of electrical load and ambient temperature.
CURRENT
2017-11-09
Standard
AS6009A
This document defines a set of standard application layer interfaces called JAUS Mobility Services. JAUS Services provide the means for software entities in an unmanned system or system of unmanned systems to communicate and coordinate their activities. The Mobility Services represent the vehicle platform-independent capabilities commonly found across all domains and types of unmanned systems (referred to as UxVs). At present, over 15 services are defined in this document many of which were updated in this revision to support Unmanned Underwater Vehicles (UUVs). Some examples include:
CURRENT
2017-11-08
Standard
AS85485B
This specification covers the requirements for radio frequency absorptive component wires and finished cables which function electrically as distributed low-pass filters. Materials and construction details are specified in the detail specification.
2017-11-03
WIP Standard
AS22520/48
AS22520/48 PERMITS MAINTAINERS TO HAVE A SELF-CONTAINED/ POWERED BY MULTIPLE ACTUATION OF A MOVABLE HANDLE TO CRIMP CONTACT SIZES 8 THRU 0000. THE TOOL PROVIDES AN ALTERNATIVE TO THE M22520/23-01 COMPRESSED AIR POWER TOOL. THE TOOL UTILIZES THE AS22520/23 DIE ASSEMBLIES/POSITIONERS AND PROVIDES MORE EFFICIENT FIELD MAINTENANCE SUPPORT.
2017-11-03
WIP Standard
AS39029/90C
No scope available.
2017-11-03
WIP Standard
AS39029/91C
SCOPE IS UNAVAILABLE.
CURRENT
2017-11-03
Standard
AS81714/29A
No scope available.
CURRENT
2017-10-30
Standard
AS20708/7B
No Scope Available
CURRENT
2017-10-30
Standard
AS20708/25B
This specification covers the detail requirements for control transformer synchro, type 16CTB4b, 90 volt, 400 cycle.
CURRENT
2017-10-30
Standard
AS20708/16B
CURRENT
2017-10-30
Standard
AS20708/22B
CURRENT
2017-10-30
Standard
AS20708/17B
CURRENT
2017-10-30
Standard
AS20708/31B
CURRENT
2017-10-30
Standard
AS20708/39C
This specification covers the detail requirements for control transformer synchro, type 19CTB4b, 90 volt, 400 cycle.
2017-10-26
WIP Standard
ARP6812
This SAE Aerospace Recommended Practice (ARP) covers the functional, design, construction, and test requirements for Brake Temperature Monitoring Systems (BTMS), and sometimes referred to as Brake Temperature Indication Systems (BTIS). The BTMS is limited to aircraft where a dispatch indication and brake temperature indication is required. The scope of this BTMS equipment shall be limited to the 1) brake temperature sensor or indicator, 2) temperature reference measurement, if required, and 3) processing and communication of brake temperature. This recommended practice will not address cockpit ergonomics and aircraft operating procedures.
2017-10-26
WIP Standard
AS23053/10A
SCOPE IS UNAVAILABLE.
2017-10-25
WIP Standard
ARP1340B
This document specifies those requirements and procedures for periodic tests to insure maintenance of balance machine capabilities for balancing jet engine components.
Viewing 1 to 30 of 4495