Rockets re-engineered-a step further into the cosmos Powertrain design for reliability Ice breaker Mazda's Skyactiv-X beats the big companies to market with a promising new engine that marries Otto and Diesel attributes. Advances for off-highway engine design As manufacturers continue to drive out cost and meet a worldwide patchwork of regulatory frameworks, the tools for developing those engines are advancing. From showcase prototypes to advanced analytical techniques, suppliers are helping the cause. Aeroacoustic simulation delivers breakthroughs in aircraft noise reduction Autonomy testing: Simulation to the rescue Autonomous technology development injects new rigors on vehicle-development testing.
Opposed-piston engines: the powerplant of the future India's dream of an all-EV fleet by 2030: Myth, miracle, or reality? An approach for prediction of motorcycle engine noise under combustion load Innovations for lightweighting Tough U.S. fuel-economy bogies for 2021 and beyond are driving new approaches for materials, as seen in these examples. More intelligence equals more efficiency, enhanced functionality Advanced electronic systems require renewed focus on architectures, processors, sensors and networks. Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will drive vehicle development in the near future, say industry experts attending the revamped SAE COMVEC 17 event.
Alternative fuels and challenges Automotive powertrain development: virtually-connected hardware co-simulation Functional Safety-progressing towards safer mobility Electric rockets and the future of satellite propulsion Achates powers toward production A potential ICE game-changer, the Achates OP engine is being tooled up for production at one OEM while a new 2.7-L triple for light-truck demonstrations enters the build phase. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
A greener future for two-wheelers New BS VI emissions standards for two-wheelers are an enviro-opportunity. Additive manufacturing How 3D printing will transform the A&D support chain. Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Advances in lightweight electronics protection Conformal coatings increase reliability of aerospace and military assemblies.
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
Types of aircraft passenger-escape systems An overview of existing and potential new methods for assuring aircraft occupant safety. SAE Skill India Initiative: S2I2 A new SAEINDIA collaboration aims to help young engineers acquire "industry-ready" skills. A technology-driven sustainable-agriculture solution Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Rotorcraft icing computational tool development 3D printing machines can't be built fast enough In the additive-manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.
Autonomous vehicles: impact on society Self-driving technology offers plenty of promise, but not everything about autonomous vehicles will be a panacea. Crankshaft reliability by integrated design, simulation, and testing This testing method is proven and beneficial for the design and development of the crankshaft and could be applied to other critical engine components, thereby extending to system reliability. New Engines 2016 Highlighting the design, engineering, and technologies inside some of the most competitive gasoline and light-duty diesel ICEs. Touch and go Avionics developments are changing life in the cockpit and at airborne work stations. Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions.
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
Next-generation GDI Will new efficiency and emissions rules mean major changes for gasoline direct-injection technology? Hard to answer Technical and personal issues make it challenging to link smartphones to vehicles. Composite design optimization for automated fiber placement Coriolis Composites and SAFRAN Aircelle worked together on a thrust reverser component demonstrator made with carbon-fiber-reinforced plastic (CFRP) material and an AFP process. Making virtual design a reality A new virtual design approach for commercial vehicle concepts allows for purposeful design and integration of new concepts and technologies on the component level in an existing product portfolio, while not neglecting the need for standardization and modularity.
Oil debris monitoring in aero engines In a gas turbine engine, small particles or "chips" are generated at the point of wear, serving as an advanced warning that catastrophic failure will occur if the wear is not addressed. Health monitoring systems, such as oil debris monitoring, are used to find these small particles so that the wear can be resolved before it's too late. Indigenous powertrain development Customer needs and expectations on drivability, fuel economy, and safety has pushed Indian and multinational OEMs to think about the development of powertrains and gearboxes for local needs with global standards. The next wave of crash simulation As computing speed has improved and software itself has made significant speed and performance gains with each release, modeling tools are now quick enough to build high-quality, large, high-detail vehicle models in a very efficient manner.
SMACing the automotive industry: from concept to consumer Technology is making a more significant impact on today's auto industry. Perhaps one of the most notable examples is the development of connected technologies coupled with social, mobile, analytics, and cloud (SMAC) technologies. The 3i paradigm: India's story The concept of ideation, incubation, and implementation is enhancing the growth of the Indian automotive industry. Virtualization for automotive IVI systems As the demand for modern in-vehicle infotainment systems grows, automakers are increasingly looking toward virtualization as a solution to bridge the gap between consumer and automotive electronics. Command Center: Securing connected cars of the future automotive An architectural approach to minimize connectivity interfaces acts as a secure, intelligent gateway between the car and external devices/networks to better guard against malicious or sensitive data from being compromised.