Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 1038
2017-05-05
Magazine
Alternative fuels and challenges Automotive powertrain development: virtually-connected hardware co-simulation Functional Safety-progressing towards safer mobility Electric rockets and the future of satellite propulsion Achates powers toward production A potential ICE game-changer, the Achates OP engine is being tooled up for production at one OEM while a new 2.7-L triple for light-truck demonstrations enters the build phase. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2017-05-04
Magazine
Innovations for lightweighting Tough fuel-economy bogies for 2021 and beyond are driving new approaches to materials use, as seen in these case studies. Axellent progress AAM's new Quantum drive-axle technology is a leap forward in lightweight, efficient driveline systems aimed at 2020 and beyond. Low-temperature combustion ready for prime time? At SAE's High-Efficiency IC Engines Symposium, Delphi said its new, third-generation GDCI is promising, but even LTC proponents admit that challenges remain. More automation for ECU testing The latest fault-insertion tests enable engineers to run more test cases in less time.
2017-04-27
Magazine
Interoperability Standards Pave the Way for Modular Robotic Manipulators Solar Powering UAVs Deploying COTS Subsystems in UUVs Developing a Multi-Modal UGV Robot Control Interface Fast-Tracking Autonomous Vehicles with Simulation Gesture-Based Controls for Robots: Overview and Implications for Use by Soldiers Identifying the Flow Physics and Modeling Transient Forces on Two-Dimensional Wings Experimental Confirmation of an Aquatic Swimming Motion Theoretically of Very Low Drag and High Efficiency The Scaling of Loss Pathways and Heat Transfer in Small Scale Internal Combustion Engines A Guide for Developing Human-Robot Interaction Experiments in the Robotic Interactive Visualization and Experimentation Technology (RIVET) Simulation
2017-04-06
Magazine
Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2017-04-03
Magazine
All about electronics UniBo Motorsport of the University of Bologna in Italy details its self-developed electronic control units and strategy for use in its Formula SAE cars. Golden Bear strong A dispatch from the coalfields of West Virginia describes the unique set of challenges faced by the Baja SAE team at West Virginia University Institute of Technology. And the SAE Collegiate Cup for best communicators goes to… The Kettering University's snowmobile team for its outstanding presentation to the SAE Mid-Michigan Section.
2017-03-30
Magazine
Thought leadership at WCX17 Proliferating electrification and performance. Clarity of purpose Honda's 2017 Clarity Fuel Cell has impressive performance, zero emissions and zero range anxiety. Clarity is ready for the mainstream, but is hydrogen fuel? Lightweighting hinges on the details Multi-material design approaches require careful integration of all adjacent constituents. Haptic feedback for gesture-control HMI Mid-air gesture controls rely on sophisticated sensing to aid the human-machine interface and help keep drivers' eyes on the road. Road-efficient mud machine Jeep's new Compass benefits from a trick AWD system co-developed with GKN. Past as prelude to the future SAE's Mobility History Committee brings a trove of knowledge- and cool technology. The new Fellow from Ricardo Prof. Neville Jackson will be recognized as an SAE Fellow at WCX17.
2017-03-30
Magazine
Designing Electronic Warfare to Regain Airborne Military Dominance Certifying Composite Designs for Aerospace and Defense Electric Rockets and the Future of Satellite Propulsion Flat Cable Technology for Aerospace Applications XPONENTIAL 2017 – An AUVSI Experience Pulse Analysis Techniques for Radar and Electronic Warfare Reconfigurable Radio Tracks Flights Worldwide Development of an Optically Modulated Scatterer Probe for a Near-Field Measurement System Using Dempster-Shafer Fusion for Personnel Intrusion Detection Angular Random Walk Estimation of a Time-Domain Switching Micromachined Gyroscope Using Fisher Information Criteria for Chemical Sensor Selection via Convex Optimization Methods Luminescence Materials as Nanoparticle Thermal Sensors
2017-03-02
Magazine
Thought leadership at WCX17 Lucid Motors’ David Moseley: EV or ICE, “It is all physics” New eye on the road One of the industry’s hottest tech suppliers is blazing the autonomy trail by crowd-sourcing safe routes and using AI to learn to negotiate the road. Mobileye’s co-founder and CTO explains. Hard, slick and ready to roll A tough, self-renewing catalyst coating developed at Argonne National Laboratory provides unprecedented friction and wear protection for vehicle powertrains, the inventors claim. Sensor ICs, semiconductors and safety To achieve ISO 26262 compliance, engineering practices must be taken to a higher level. The following insights may prove valuable for getting there. New VCR targets 40% BTE Variable-compression ratio with VVA from France’s MCE-5.
2017-02-03
Magazine
A greener future for two-wheelers New BS VI emissions standards for two-wheelers are an enviro-opportunity. Additive manufacturing How 3D printing will transform the A&D support chain. Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Advances in lightweight electronics protection Conformal coatings increase reliability of aerospace and military assemblies.
2017-02-02
Magazine
WCX17 Preview The annual SAE World Congress is rebranded WCX17 to express its expanded experience of new-technology discussion and established thought leadership. Achates powers toward production Achates Power's internal-combustion solution is a new play on an old technology. Inside the Bolt EV While the new battery deserves credit for the car's +200-mile range, systems optimization, careful motor design and proprietary CAE tools were equally important. CES 2017: Lush luxury EVs, sophisticated connectivity Suppliers challenge OEMs in advanced tech. Editorial: Question mark or exclamation point Supplier Eye Are you prepared for greater electrification? SAE Standards News VS committees fully engaged on cybersecurity.
2017-01-26
Magazine
Open Standard Middleware Enables New HPEC Solutions Cooling Your Embedded System What Can Your Open Standard Architecture Handle? Evaluating Key Certification Aspects of Multicore Platforms for Safety Critical Avionics Applications Simulating and Analyzing Flow for an Air-to-Air Refueling System The Ins and Outs of Spaceflight Passive Components and Assemblies Development of High Quality 4H-SiC Thick Epitaxy for Reliable High Power Electronics Using Halogenated Precursors Silicon Based Mid-Infrared SiGeSn Heterostructure Emitters and Detectors Reconfigurable Electronics and Non-Volatile Memory Research Energy-Filtered Tunnel Transistor: A New Device Concept Toward Extremely Low Energy Consumption Electronics
2016-12-22
Magazine
Thought leadership at WCX17 Magna's CTO talks innovation and disruption at WCX17, the newly rebranded SAE World Congress. Patton's new campaign As new SAE International President for 2017, Doug Patton will advocate STEM, "cultivation" of prospective young engineers. New EEAs for the connected, autonomous future OEMs and their Tier-1 partners are revamping vehicle electronic and electrical architectures with "über brain" central computers and real-time Ethernet to feed tomorrow's data-hungry cars and trucks. Bridging the power gap with 48 volts New 48-V technologies are poised to arrive in volume to help meet CO2 regulations and satisfy the "vampire" power demands of new electrical subsystems and accessories. Autonomy, connectivity headline the 2017 Consumer Electronics Show The automotive component of CES expands as global anticipation for automated driving and enhanced connectivity intensifies. Editorial: Vital Transformation Supplier Eye The impact of shifting to the 'softer' side.
2016-12-02
Magazine
Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs
2016-12-01
Magazine
Editorial: What's old (and revered) is new again Toyota sticking with measured, 'Teammate' approach to autonomous development Straight-sixes are back (with electrification) at Mercedes-Benz McLaren faces the electrified and autonomous future Can low-volume supercars survive amid stringent CO2 regs and robot cars? McLaren is betting £1 billion on a speedy, powerful-and independent-sports-car future. New Peugeot SUVs jump to modular platform, increase composites use Mercedes EQ concept previews 2019 electric SUV 2017 Nissan Rogue adds hybrid system with EV-only mode Renault's kids' racer
2016-12-01
Magazine
Additive Manufacturing How 3D Printing Will Transform the A&D Support Chain Advances in Lightweight Electronics Protection Conformal Coatings Increase Reliability of Aerospace and Military Assemblies Powering Outer Space An In-Depth Look at Aerospace Battery Technology Using High Bandwidth Oscilloscopes to Analyze Radar and Electronic Warfare Systems Bio-inspired Airborne Infrastructure Reconfiguration (BioAIR) EMI Analysis Software Helps Telescope Group Simulate RFI Mitigation Epitaxial Growth of Rhenium with Sputtering Processing and Characterization of Polycrystalline YAG (Yttrium Aluminum Garnet) Core-Clad Fibers Multi-Scale Analysis of Deformation and Failure in Polycrystalline Titanium Alloys Under High Strain Rates Abrasion Testing of Products Containing Nanomaterials Spectrum Fatigue of 7075-T651 Aluminum Alloy under Overloading and Underloading
2016-11-16
Magazine
Focus on advanced safety systems and human-factor interventions The impact of REACH on the aviation sector Considered the most comprehensive chemical-regulation legislation to date, REACH presents serious ramifications for the aircraft industry. Lightweighting: What's Next? Experts weigh in on the challenges and future enablers in the battle to reduce vehicle mass. The best of COMVEC 2016 Autonomous vehicles and improved fuel efficiency via advanced powertrain solutions are pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Optimizing waste heat recovery for long-haul trucks Autonomous solutions in agriculture Downsizing a HD diesel engine for off-highway applications Zero-emissions electric aircraft: Theory vs. reality
2016-11-03
Magazine
SAE Convergence 2016 Talk of the healthy aspects of disruption mingles with SAE's renowned technical emphasis to foster the auto industry's continuing evolution toward electrification and autonomy. The Battery Man Speaks The speed of progress in automotive lithium batteries has impressed AABC's Dr. Menahem Anderman. So has silicon-graphite anode technology development from Tesla and Panasonic. Industry 4.0: The smart factory arrives The plants that produce automotive systems and vehicles are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. Editorial: Promise of 48 volts is no shock Nissan unveils variable-compression-ratio ICE for 2018 Infiniti production model Optimizing engine oil warm-up strategies for 'real-world' driving In search of higher-energy-content batteries Making Multiphysics fast and convenient I.D.
2016-10-07
Magazine
The Best of COMVEC 2016 Autonomous vehicles, improved fuel efficiency and thermal management are among the pressing topics detailed in this select group of technical papers from the SAE Commercial Vehicle Engineering Congress. Autonomous solutions in agriculture Pneumatically shifted air suspension loading on 6x2 trucks Optimizing waste heat recovery for long-haul trucks Downsizing a HD diesel engine for off-highway applications Fan-shroud optimization for enhanced thermal performance Touch takes hold, switches lend a hand Touch screens are becoming the norm, but knobs and switches are often used to improve operator comfort. U.S. Army marches toward driverless future TARDEC targets vehicle autonomy with new V2V / V2X test bed in Michigan.
2016-10-06
Magazine
Steering Mazda's unique course A chassis engineer at heart, Chairman Seita Kanai challenges his engineers to think differently and embrace the Skyactiv technology that has made Mazda a benchmark. Delphi's multi-domain mindset From tackling the cyber threat to putting 48-volt hybrids with Dynamic Skip-Fire on the road, Engineering VP Mary Gustanski is harnessing a technology powerhouse. The evolving tire-development paradigm Advanced tire-simulation modeling allows tire development to keep pace with accelerated vehicle-development cycles. MEMS the word for next-gen HUDs New high-speed, quad-channel laser diode drivers are designed to beat the LCD and DLP incumbents for next-gen vehicle head-up displays.
2016-10-03
Magazine
All about the engine The University of Wisconsin-Madison team increases engine displacement and implements exhaust gas recirculation to maintain winning ways in SAE Clean Snowmobile Challenge. Fluid mechanics of diesel injection studied at Penn State Special photography method helps student researchers get a better look at spray patterns. Under new management A senior-heavy squad from Minnesota State University, Mankato, takes a different approach to team dynamics and jumps 34 spots to 17th overall at the 2016 Formula SAE Michigan competition.
2016-10-03
Magazine
Achieving Performance Advantages in Unmanned Systems Unmanned Vehicle Systems (UVS) are reaching new levels of functionality and performance, and it's not just for air vehicles either. COTS Embedded Systems and Link Budgets The days of proprietary embedded computing systems in military systems are numbered. Custom Designing Enclosures Using 3-D CAD Modeling Due to the advancement of 3-D computer-aided design software, enclosure manufacturing is not what it used to be. Technology advances industry. Fiber Optic Multi-Sensing Platforms Enabling Innovation Across Aerospace Organizations RECAT Wake Turbulence Recategorization New Concept for Improving the Performance of Electrically Small Antennas Microwave Radiometer for Advanced Nanosatellite Control Systems Secret Sharing Schemes and Advanced Encryption Standard SIPHER: Scalable Implementation of Primitives for Homomorphic Encryption Using Mathematics to Make Computing on Encrypted Data Secure and Practical
2016-09-01
Magazine
Ruling the skies Warsaw University of Technology and Georgia Tech dominate SAE Aero Design competitions. European teams take top spots at FSAE Michigan, U.S. teams at FSAE Lincoln Universitat Stuttgart of Germany and Auburn University of the U.S. take crowns at SAE Collegiate Design Series Formula competitions. Michigan Baja Racing repeats as Baja SAE season champion Coming in second is Rochester Institute of Technology, which was victorious in one of the 3 Baja SAE competitions.
2016-09-01
Magazine
Solving the Greenhouse Gas puzzle While automakers and policymakers debate the TAR, engineers and product planners prepare for the steep climb to meet GHG and CAFE rules beyond 2022. Revving up thermal characterization in the component lab The latest generation of high-speed infrared cameras can capture airbag deployments and other fast-moving actions quickly and accurately. C3 consortium aims for soot solution A newly formed group of companies led by CFD specialists Convergent Science targets exhaust particulate reduction in the combustion chamber. Inside the autonomous vehicle With less focus on driver needs, comfort, safety, and occupant productivity will become key. Editorial: Bad gas?
2016-08-16
Magazine
Types of aircraft passenger-escape systems An overview of existing and potential new methods for assuring aircraft occupant safety. SAE Skill India Initiative: S2I2 A new SAEINDIA collaboration aims to help young engineers acquire "industry-ready" skills. A technology-driven sustainable-agriculture solution Pumping more air into the cylinder is key to solving the CAFE puzzle, and engineers are hard at work figuring out the best ways to do it with turbocharger and supercharger innovation. Rotorcraft icing computational tool development 3D printing machines can't be built fast enough In the additive-manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-08-05
Magazine
Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-08-04
Magazine
Special report: Lightweighting Uncovering the next actions in the industry's grand mass-reduction campaign. CAE's next leap forward With 3D simulations skyrocketing, engineers are looking forward to highly-optimized toolsets to keep pace with complexity. SAE Convergence 2016 Preview Meet the disruptors, network with peers and learn about the latest tech solutions that are rapidly changing the auto industry. "Military-grade" aluminum Jaguar, Exa say simulation to eliminate prototypes by 2020 OEMs expand testing of FEV variable-compression ratio engine Growth of FCVs and EVs tied to infrastructure Bolt EV seat design cuts weight, delights tall passengers Rolls-Royce reveals a Vision of its future Volvo bets on new PowerPulse, not 48V, to attack turbodiesel 'lag' SEAT to spearhead VW's new platform and 48V technology Dr. Jay Baron of CAR discusses vehicle lightweighting and predicts the outcome of the crucial CAFE mid-term review.
2016-08-01
Magazine
Seeing the Light Achieving Full-Color, Day or Night Readability for Flat-Panel Displays Multiple Node Networking Using PCIe Interconnects PCI Express (PCIe) interconnects, and how they can be used to support multiple node low latency data transfers over copper or optical cables, is gaining momentum in embedded computing solutions. Zero-Emissions Electric Aircraft Theory vs Reality Analyzing Radar Signals With Demodulation Combining Software and Hardware for Highly Specialized Multichannel Spectrum Monitoring Advanced Thermal Management Solutions Thermoelectric Cooling Thermal Ground Planes Thermal Management of Laser Diodes The Effect of Substrate Emissivity on the Spectral Emission of a Hot-Gas Overlayer Process Approach to Determining Quality Inspection Deployment Experimental Setup to Assess Blast and Penetration-Induced Secondary Debris in a Military Operations in Urban Terrain (MOUT) Environment Non-Contact Circuit for Real-Time Electric and Magnetic Field Measurements
2016-07-07
Magazine
Technology report Quest for 'new-car smell' dictates interior-materials changes Doing it again-this time with 10 After a successful decade-long collaboration on 6-speed transaxles, Ford and GM partner again on an all-new 10-speed automatic. Here's a look inside the gearbox and the project. Large-scale additive manufacturing for rapid vehicle prototyping A case study from Oak Ridge National Laboratory bridges the 'powertrain-in-the-loop' development process with vehicle systems implementation using big area additive manufacturing (BAAM). Global Vehicles Steel-intensive Mazda CX-9 sheds mass, debuts novel turbo setup
2016-06-03
Magazine
Executive viewpoints Industry leaders offer their insights on the state of the heavy-duty on- and off-highway industries in this annual series of opinion pieces. The executives share their views on the most pressing technologies and trends shaping their business and the industry moving forward. Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2016-06-02
Magazine
A 24-hour battle of speed and efficiency At Le Mans this month, amped-up hybrid prototype racecars from Audi and Toyota face a revamped Porsche 919 hybrid, while Ford hopes to recapture glory with its new GT-R. Pushing the ICE forward, gradually Emergent technologies from BorgWarner, Eaton and Mahle aim for greater efficiency in gasoline and diesel engines. Smile, you're on Magna camera! Magna Electronics is rapidly expanding production of its made-in-U.S.A. onboard cameras to keep pace with booming OEM demand for safety and vehicle-autonomy vision-systems technology. Multi-material body solutions: Possibilities and manufacturing challenges The body-in-white is a prime target for lightweighting and many automakers are pursuing unique and effective multi-material approaches, but improved design tools and processes might yield greater gains.
Viewing 1 to 30 of 1038