Criteria

Text:
Topic:
Display:

Results

Viewing 1 to 30 of 382
2017-10-08
Technical Paper
2017-01-2432
Xiangwang Li, Weimin Wang, Xiongcai Zou, Zhiming Zhang, Wenlong Zhang, Shemin Zhang, Tao Chen, Yuhuang Cao, Yuanda Chen
In order to reduce emissions, size and manufacturing cost, integrated exhaust manifold become popular in gasoline engine, especially in three-cylinder engine. Moreover, due to shorter length, lighter weight, and less component connections, the exhaust manifold and hot end durability will improve apparently. In this work, an advanced cylinder head with integrated exhaust manifold is in adopted in one three-cylinder turbo engine. Because of this integration characteristic, the gas retain in cylinder head longer and the temperature reach higher level than normal cylinder head, which will cause thermal fatigue failure more easily. To validate the exhaust manifold and hot end durability, series simulation and test validation work have been done. Firstly, overall steady state and transient temperature simulation was done for global model. The global model include cylinder head, block, turbocharger, and catalyst components.
2017-09-04
Technical Paper
2017-24-0127
Lauretta Rubino, Dominic Thier, Torsten Schumann, Stefan Guettler, Gerald Russ
Abstract With the increased use of engines utilizing direct fuel injection and the upcoming introduction of more stringent emissions legislation that regulates not only particulate mass (PM) but also particulate number (PN), the emissions from Direct Injection Spark Ignition Engines (DISI) are an increasing concern. Gasoline Particle Filters (GPF) represent a potential way to reduce particle number emissions from DISI engines and are particularly effective considering the tough performance requirements during cold start and over RDE operation. Even though some learning from the development and application of particulate filters to diesel engines can be transferred to gasoline engines, the particle composition, mass to number ratio as well as the exhaust gas temperature and composition from gasoline engines are significantly different to diesel engines. Therefore, there is the need to study the application of particulate filters to gasoline engines in more depth.
2017-06-05
Technical Paper
2017-01-1857
Joshua R. Goossens, William Mars, Guy Smith, Paul Heil, Scott Braddock, Jeanette Pilarski
Abstract Fatigue life prediction of elastomer NVH suspension products has become an operating norm for OEMs and suppliers during the product quoting process and subsequent technical reviews. This paper reviews a critical plane analysis based fatigue simulation methodology for a front lower control arm. Filled natural rubber behaviors were measured and defined for the analysis, including: stress-strain, fatigue crack growth, strain crystallization, fatigue threshold and initial crack precursor size. A series of four distinct single and dual axis bench durability tests were derived from OEM block cycle specifications, and run to end-of-life as determined via a stiffness loss criterion. The tested parts were then sectioned in order to compare developed failure modes with predicted locations of crack initiation. In all cases, failure mode was accurately predicted by the simulation, and predicted fatigue life preceded actual end-of-life by not more than a factor of 1.4 in life.
2017-04-11
Journal Article
2017-01-9177
N. Obuli Karthikeyan, R. Dinesh Kumar, V. Srinivasa Chandra, Vela Murali
Abstract In the modern automotive sector, durability and reliability are the most common terms. Customers are expecting a highly reliable product but at low cost. Any product that fails within its useful life leads to customer dissatisfaction and affects the reputation of the OEM. To eradicate this, all automotive components undergo stringent validation protocol, either in proving ground or in lab. This paper details on developing an accelerated lab test methodology for steering gearbox bracket using fatigue damage and reliability correlation by simulating field failure. Initially, potential failure causes for steering gearbox bracket were analyzed. Road load data was then acquired at proving ground and customer site to evaluate the cumulative fatigue damage on the steering gearbox bracket. To simulate the field failure, lab test facility was developed, reproducing similar boundary conditions as in vehicle.
2017-03-28
Technical Paper
2017-01-0473
Satoshi Nakada, Toru Furusawa, Eiichiro Yokoi, R Carbas, M Costa, E Marques, G Viana, LFM da Silva
Abstract In recent years, adhesive bonding is increasingly being applied in the construction of vehicle frames in order to improve body stiffness and crash performance. Regarding crash performance, the behavior of impacted components is affected by the fracture energy value of the adhesive. However, the relationship between the ductility and fracture energy values under mixed-mode loadings has not been sufficiently evaluated. In this paper, the fracture energy of three structural adhesives in a static mixed-mode loading using Double Cantilever Beam (DCB) specimens is presented. To derive the fracture energy values, the Compliance Based Beam Method (CBBM) was used, which allowed for precise determination of fracture energy values. Static mixed-mode loading tests were performed in six configurations of mixed-mode loading, ranging from pure peel mode state to almost pure shear mode state.
2017-03-28
Technical Paper
2017-01-0337
Kalyan S. Nadella, Yi Zhang
Abstract Ensuring durability is one of the key requirements while developing cooling modules for various powertrains. Typically, road surface induced loads are the main driving force behind mechanical failures. While developing the components, road load accelerations are utilized in CAE simulations to predict the high-stress regions and estimate the fatigue life of the components mounted on the body. In certain scenarios where components are mounted to the body and attached to the engine with hoses, the components can experience additional loads associated with engine vibration. This attachment scheme requires a different analysis methodology to determine fatigue life. In the proposed paper, we look at the effect of engine motion (EM) on the fatigue life of internal transmission oil cooler (ITOC) which is mounted on the body through radiator and is simultaneously connected to the engine using a steel pipe.
2017-03-28
Technical Paper
2017-01-0348
Mani Shankar, I V N Sri Harsha, K V Sunil, Ramsai Ramachandran
Abstract In an automobile, road loads due to tire-road interaction are transferred to vehicle body through suspension. This makes suspension a critical component from the body durability perspective. During vehicle design and development, optimization of suspension parameters to suit ride and handling performance is a continuous and iterative process. These changes on suspension can affect vehicle body durability performance. This paper tries to establish a process to evaluate the effect of changes in suspension parameters on body durability, thus helping in understanding the impact of these changes. The process starts with virtual model building in Multi Body Dynamics software. The base line model is correlated with testing using fatigue at some critical locations on Body in White (BIW).
2017-03-28
Technical Paper
2017-01-0347
Yat Sheng Kong, Dieter Schramm, M. Zaidi Omar, Sallehuddin Mohd. Haris, Shahrum Abdullah
This paper presents the study of a relationship between objective vertical vibration and coil spring fatigue life under different road excitation to shorten suspension design process. Current development processes of vehicle suspension systems consist of many different stages of analysis and time consuming. Through this vertical vibration and durability characterisation, the vehicle ISO weighted vertical accelerations were used to describe fatigue life of coil spring. Strain signals from various roads were measured using a data acquisition and then converted into acceleration signal. The acceleration signals were then used as input to multibody suspension model for forces time history on spring and acceleration signal of sprung mass extraction. The acceleration signals were then processed for ISO weighted indexes while the force time history was used for coil spring fatigue life prediction respectively.
2017-03-28
Technical Paper
2017-01-0341
Seyyedvahid Mortazavian, Javid Moraveji, Reda Adimi, Xingfu Chen
Abstract In this study, a finite element analysis method is developed for simulating a camshaft cap punching bench test. Stiffness results of simulated camshaft cap component are correlated with test data and used to validate the model accuracy in terms of material and boundary conditions. Next, the method is used for verification of cap design and durability performance improvement. In order to improve the computational efficiency of the finite element analysis, the punch is replaced by equivalent trigonometric distributed loads. The sensitivity of the finite element predicted strains for different trigonometric pressure distribution functions is also investigated and compared to strain gage measured values. A number of equivalent stress criteria are also used for fatigue safety factor calculations.
2017-03-28
Technical Paper
2017-01-1491
Manish Kumar Seth, Jens Glorer, Ralf Schellhaas
Abstract For long automakers around the globe are trying to reduce weight and cost of the components in order to make vehicles more cost and fuel efficient. This paper deals with same problem for rear twist beam for an upcoming vehicle, the task was to reduce the weight and cost of the twist beam structure without compromising on attributes as compared to the surrogate part. This problem was solved by inventing a new torsion profile and gusset combination which uses shape instead of thickness to use material more efficiently thereby reducing weight and cost. This invention has been successfully patented as well.
2017-03-28
Technical Paper
2017-01-1488
Srinivas Kurna, Ruchik Tank, Riddhish Pathak
Abstract The job of a suspension system is to maximize the friction between the tires and the road surface, to provide steering stability with good handling and to act as a cushioning device ensuring the comfort of the driver & passengers. The suspension also protects the vehicle itself and any cargo or luggage from damage and wear. Almost all heavy duty vehicles use inverted type suspension system which is also called as bogie type suspension system. The design of this type of suspension is a complex and difficult science which has evolved over many years. It was recognized very early in the development of suspensions that the interface between vehicle body and wheel needed some sort of cushioning system to reduce the vibration felt as the vehicle moved along. This was already part of road coach design and took the form of leaf (laminated) steel springs mounted on the axles, upon which the vehicle body rested.
2017-03-28
Technical Paper
2017-01-0890
Yoichiro Nakamura, Masahisa Horikoshi, Yasunori TAKEI, Takahiro Onishi, Yasuhiro Murakami, Chip Hewette
Abstract Heavy duty vehicles take a large role in providing global logistics. It is required to have both high durability and reduced CO2 from the viewpoint of global environment conservation. Therefore lubricating oils for transmission and axle/differential gear box are required to have excellent protection and longer drain intervals. However, it is also necessary that the gear oil maintain suitable friction performance for the synchronizers of the transmission. Even with such good performance, both transmission and axle/differential gear box lubricants must balance cost and performance, in particular in the Asian market. The development of gear oil additives for high reliability gear oil must consider the available base oils in various regions as the additive is a global product. In many cases general long drain gear oils for heavy duty vehicles use the group III or IV base oils, but it is desirable to use the group I/II base oils in terms of cost and availability.
2017-03-28
Technical Paper
2017-01-0455
Harshad Hatekar, Baskar Anthonysamy, V. Saishanker, Lakshmi Pavuluri, Gurdeep Singh Pahwa
Abstract Structural elastomer components like bushes, engine mounts are required to meet stringent and contrasting requirements of being soft for better NVH and also be durable at different loading conditions and different road conditions. Silent block bushes are such components where the loading in radial direction of bushes are high to ensure the durability of bushes at high loads, but has to be soft on torsion to ensure good NVH. These requirements present with unique challenge to optimize the leaf spring bush design, stiffness and material characteristics of the rubber. Traditionally, bushes with varying degree of stiffness are selected, manufactured and tested on vehicle and the best one is chosen depending on the requirements. However, this approach is costly, time consuming and iterative. In this study, the stiffness targets required for the bush were analysed using static and dynamic load cases using virtual simulation (MSC.ADAMS).
2017-03-28
Technical Paper
2017-01-0907
Timothy Johnson, Ameya Joshi
Abstract This review paper summarizes major and representative developments in vehicle engine efficiency and emissions regulations and technologies from 2016. The paper starts with the key regulatory developments in the field, including newly proposed European RDE (real driving emissions) particle number regulations, and Euro 6 type regulations for China and India in the 2020 timeframe. China will be tightening 30-40% relative to Euro 6 in 2023. The California heavy duty (HD) low-NOx regulation is advancing and the US EPA is anticipating developing a harmonized proposal for implementation in 2023+. The US also finalized the next round of HD GHG (greenhouse gas) regulations for 2021-27, requiring 5% engine CO2 reductions. LD (light duty) and HD engine technology continues showing marked improvements in engine efficiency. Key developments are summarized for gasoline and diesel engines to meet both the emerging criteria and greenhouse gas regulations.
2017-03-28
Technical Paper
2017-01-1331
Marko Basic, Thomas Resch
Abstract This paper describes a numerical study of the effect of hollow crankshafts on crankshaft local strength and durability as well as slider bearing contact behavior. Crankshaft dynamic simulation for durability is still a challenging task, although numerical methods are already worldwide established and integrated part of nearly every standard engine development process. Such standard methods are based on flexible multi-body dynamic simulation, combined with Finite Element analysis and multi-axial fatigue evaluation. They use different levels of simplification and consider the most influencing phenomena relevant for durability. Lightweight design and downsizing require more and more detailed methods due to higher deformation of the crankshaft. This is especially true for hollow shafts, as present in motorsport design or aerospace applications, but also for standard engine having high potential for significant weight savings.
2017-03-28
Journal Article
2017-01-0420
Prashant Khapane, Sumiran Lohani
Abstract Vibration Isolation is the key objective of engine mounting systems in the automotive industry. A well-designed, robust engine mount must be capable of isolating the engine assembly from road-based excitations. Owing to high vibration inputs, engine mounts are susceptible to wear and failure. Thus, the durability of engine mounts is a cause for concern. A design validation methodology has been developed at Jaguar Land Rover using Multibody Dynamics (MBD) to enhance the prognosis of engine mount loads during full - vehicle durability test events. This paper describes the development of a virtual multi-axial simulation table rig (MAST Rig) to test virtual engine mount designs. For the particular example considered in this paper, a simple sinusoidal input is applied to the MAST Rig. The development of the virtual MAST Rig has been described including details of the modelling methodology.
2017-03-28
Journal Article
2017-01-1106
Yuki Ono, Kenji Matsumoto, Yuji Mihara
Abstract In order to improve shift response, durability and transmission efficiency of the CVT system, it is essential to precisely understand the behavior of individual belt elements. Although there have been some previous works measuring the strain or load on belt elements, they have been performed for speed ranges that are far below actual vehicle operation speeds due to limits in measurement techniques. We therefore developed measurement equipment that can be fitted on a CVT belt to enable measurement during actual CVT operation, and obtained the strain on belt elements under transient conditions including acceleration and transmission ratio shifts. The results showed that the strain peaks due to normal force on V faces of elements around the entrance and/or exit of the pulleys. The bending component of the strain fluctuated on the straight section from the secondary pulley to the primary pulley.
2017-03-14
Journal Article
2016-01-9080
Yong-Yuan Ku, Jau-Huai Lu, Ko Wei Lin
Due to the rising price of crude oil, biofuel is being considered as a global alternative for fossil fuels to reduce the emission of greenhouse gases. Diesel blended with bio fuel is currently being widely adopted in many countries. The Taiwanese government has been enforcing the adoption of B2 since 2010. However, there have remained consistent concerns about engine durability related to the use of biofuel, especially regarding after-treatment systems. A selective catalytic reduction system (SCR) has been utilized recently to reduce NOX emission in order to meet the Euro IV and V emission standards. To evaluate the impact of biodiesel on the durability of engines equipped with the SCR system, a long-term testing program was organized for the purposes of this study. The results can be used as a reference for the development of marketing promotion strategies as well as government policies in Taiwan.
2017-01-10
Technical Paper
2017-26-0309
Sathish Kumar Prasad, J Prakaash, P Dayalan
Abstract Automotive vehicles are subjected to a variety of loads caused by road undulations. The load history data measured from the roads are one of the vital input parameters for physical test as well as virtual durability simulation of vehicles. In general, the automotive vehicles are instrumented and subjected to a variety of driving conditions in diverse roads to obtain representative road load time histories. Acquired road load time history signals from various roads are exhaustive and repetitive in terms of both time length and data size. This results in more computation and virtual simulation processing. Hence it is imperative to reduce the input time signals without compromising on the representation of the actual operating conditions. Signal reduction of measured road load histories for virtual simulation assumes greater significance for durability prediction.
2017-01-10
Technical Paper
2017-26-0310
Vyankatesh Madane, Sameer Shivalkar, Chandrakant Patil, Sanjeev Annigeri
Abstract In rubber industry, different techniques are used to enhance durability. This paper gives complete design, development and testing methodology of rubber bush in which pre-compression of rubber is used to enhance rubber bush life. In bogie suspension, axle to torque rod join is critical as it has to transfer lateral and longitudinal load with flexibility. This makes challenging to design joint which need to carry more than 6 ton load and having flexibility of more than 10 degree articulation. In this torque rod to axle joint called as End bush, compressed rubber is used to carry high load with flexibility. Other possible material for bush can be brass bush which able to carry high load however not able to give high flexibility Design and finite element calculations are done to design pre-compression and rubber volume to get desired strength and stiffness to carry required load with flexibility.
2017-01-10
Technical Paper
2017-26-0235
Vinaykumar Dhangar, Solairaj Perumal, Abhay Kumar, Dinesh Redkar, Arun Mahajan, Abhirup Chakraborty, T Ganesan
Abstract A tractor is vehicle specifically designed to deliver a high tractive effort at slow speeds for carrying out various agriculture operations like ploughing, rotavation etc. using implement. Hydraulic system is a key feature which connects these implements with the tractor. It controls the position and draft of the implement depending upon the type of crop, farming stage, implement type and soil conditions. These variations induces extreme range of load on the hydraulic system, thus making it challenging to design these components. Bell crank assembly is one of the main components of hydraulic system which controls the draft (thus, the loads experienced by tractor) through load sensing mechanism. Often bell crank assembly failures are reported from field due to uneven soil hardness and presence of rocks. This paper studies one of such bell crank assembly failures in the field. The failure was reported after half life cycle of usage during agriculture Operation.
2016-11-08
Technical Paper
2016-32-0020
Balasubramanian Thiruvallur Loganathan, Srivenkata Subramani Narasimhan, Lakshminarasimhan Varadha Iyengar, Ajith Kumar Sandur, Sudhagar Vediappan
Abstract Development of small air cooled motorcycles is ever challenging due to combination of customer expectation, regulatory requirements and cost factors. Achieving higher performance, emission standards means higher engine and parts operating temperature. Under these changes meeting durability targets at reasonable cost needs good understanding of material, surface treatment and tribological aspects. In this paper some of the surface and process improvements done to reduce wear in engine valves and interface systems is discussed in detail. Design of engine valves shall ensure meeting thermal, mechanical strength requirements, wear and durability targets. Surface treatments, coating, surface finish and also use of special materials in tip, valve stem, seat ensures higher durability; low wear in valve and interfacing parts. During new engine development process verification tests, wear observed in valve stem- guide, valve tip- screw interface.
2016-11-08
Journal Article
2016-32-0070
Toyofumi Tsuda, Kazuya Miura, Akio Hikasa, Keiji Hosoi, Fumikazu Kimata
Abstract An exhaust gas purifying catalyst must be durable, i.e., it must maintain a sufficient catalytic performance even after thermal degradation. Therefore, large amounts of platinum group metals (PGMs), such as Pt, Pd, and Rh, should be loaded onto the catalyst substrate. Exhaust gas heat deteriorates the catalyst by sintering the PGM particles, which decreases the active surface area. It is important to reduce the PGM load and many researchers have therefore attempted to carry out PGM load reduction while maintaining sufficient durability. We found that Pt ions could form Pt-hydroxide clusters in a hexahydroxyplatinate (IV) (Pt(OH)6·H2O) nitric acid solution. The Pt-hydroxide cluster size could be controlled by varying the Pt and nitric acid concentrations and solution temperature.
2016-10-25
Technical Paper
2016-36-0432
A. C. Michelotti, A. L. F. Ferreira, L. F. Berto, C. K. Takemori, D. W. da Silva, E. Baars
Abstract This paper presents a numerical methodology to predict the dynamic behavior of the front end accessory drive (FEAD) and the overrunning alternator decoupler (OAD) pulley. The methodology uses the commercial code Altair Radioss, and is based on 3D Lagrangian formulation, finite element method and explicit time integration schemes. Contact between different parts were considered using penalty methods. The methodology is divided in two independent parts: 1) FEAD with rigid pulleys, and 2) OAD pulley alone with flexible components. In the first part it is possible to evaluate the vibration of relevant components like the belt and the tensioner pulley, and in the second part it is possible to analyze not only the vibration of the OAD pulley, but also the stresses on critical components to durability.
2016-10-25
Technical Paper
2016-36-0430
Daniel Maretti de Carvalho, C. K. Takemori, D. W. da Silva, E. Baars
Abstract Operational modal analysis is when the modal properties are identified from measured responses only. The modal parameters are: mode shapes (the way the structure moves at a certain resonance frequency), natural frequencies and damping ratios. When modal identification is based on the measured response (output) only, things become more complicated: The excitation (input) is unknown and the measured response (output) is often noisy. In this study, the time domain Stochastic Subspace Identification - Unweighted Principal Components operational modal analysis was applied to the recorded dataset from the durability test conditions of a truck. Using the 40 minutes of road test accelerometer time history in three different road conditions, it was possible to identify the modal parameters and also compare with numerical modal analysis data. Both results presented good correlation.
2016-10-25
Technical Paper
2016-36-0226
Javier Gutierrez, Guido Tosolin, Alexandre Catala
Abstract The integration of IDIADA Spain virtual Proving Ground (ISVPG) within ADAMS/Car offers a new virtual scenario to carry out detailed analysis of durability as well as Comfort & Ride. Moreover, these high resolution roads (modeled as OpenCRG road format) support model development activities through better correlation with experimental tests. This approach helps to reduce the number of real tests and to shorten development process times. At the same time, this data would be prepared for performance testing to support driving simulator and active system development. The objective of this paper is to demonstrate the benefits to use FTire model for Ride and Comfort applications and the use of flexible bodies for better predictions. The availability of this information will depend on the status of the project and the level of maturity of the simulation input data. As a result, different levels of accuracy will be reached according to the existing input data.
2016-10-25
Technical Paper
2016-36-0400
Carlos Abílio Passos Travaglia, Luiz Carlos Rolim Lopes
Abstract Great numbers of studies in sliding wear phenomena use the wear rate to quantify material losses. However, in more recent works, some authors have been tried to characterize the wear phenomena by means of the energy dissipation between the contact surfaces of the bodies. The aim of this work is to create an analytical model capable to relate the total energy dissipated by a friction material during a bench wear test and data collected directly in a vehicle brake, in order to predict the durability of this component in service life. To attain this aim, the concept of specific wear volume, SWV, is adopted. The specific wear volume is the relationship between the material wear volume and the energy dissipated during a sliding wear process. In addition, a method to calculate the energy dissipation on friction materials is presented.
2016-10-17
Technical Paper
2016-01-2341
Arnab Ganguly, Vikas Kumar Agarwal, R Pradeepak
Abstract When a scooter is put on main stand, it keeps the vehicle from falling as it rests against the engine crankcase. As the main stand is operated it transmits a large amount of load to the crankcase, thus creating a necessity to check the durability of the later. Practical tests showed that continuous application of the main stand resulted in the failure of its pivot area on the crankcase. This raised questions not just on the feasibility of the crankcase design in terms of durability, but also on the main stand design in terms of a load transmitting member. However, as the project was at its later stage, crankcase design could not be altered; thus it asked for a main stand design optimization. The base main stand model was thus taken for MBD simulation and loads were generated for further FEA analysis. The meshed crankcase model was taken in a commercially available FEA code for checking its durability.
2016-09-02
Journal Article
2016-01-9111
Sebastian Brandes, Klaus-Dieter Hilf, Riccardo Möller, Tobias Melz
Abstract This paper makes a contribution toward a more efficient chassis durability process for the development of passenger cars, in which the simulation of relevant load data is a time-consuming part. This is especially due to the full vehicle model complexity which is usually determined by the demands of rough road simulations. However, for the load calculation on a racetrack, time saving model approaches that are more simplified might be sufficient. Our investigation comprises two levels of vehicle model complexity: one with all chassis parts modeled in a multibody system environment and one characteristic curve based model in an internal simulation environment. Both approaches consider an original chassis control system as a Software-in-the-Loop model. By the evaluation of real-world experiments the main influence factors in terms of durability are demonstrated. With the help of those highly sensitive durability criteria the measurement and simulation results are then compared.
2016-06-15
Journal Article
2016-01-1852
Ehsan Fatourehchi, Vishak Elisaus, Mahdi Mohammadpour, Stephanos Theodossiades, Homer Rahnejat
Abstract Efficiency and durability are key areas of research and development in modern racing drivetrains. Stringent regulations necessitate the need for components capable of operating under highly loaded conditions whilst being efficient and reliable. Downsizing, increasing the power-to-weight ratio and modification of gear teeth geometry to reduce friction are some of the actions undertaken to achieve these objectives. These approaches can however result in reduced structural integrity and component durability. Achieving a balance between system reliability and optimal efficiency requires detailed integrated multidisciplinary analyses, with the consideration of system dynamics, contact mechanics/tribology and stress analysis/structural integrity. This paper presents an analytical model to predict quasi-static contact power losses in lubricated spur gear sets operating under the Elastohydrodynamic regime of lubrication.
Viewing 1 to 30 of 382

Filter