Criteria

Text:
Topic:
Content:
Display:

Results

Viewing 1 to 30 of 347
2017-01-27
WIP Standard
ARP5628A
This document recommends criteria and requirements for a Final Approach Spacing System (FASS) for transport aircraft. This is an Aerospace Recommended Practice to support the development of a Final Approach Spacing System (FASS) for Approach Spacing for Instrument Approaches (ASIA) operations.
2017-01-27
WIP Standard
ARP4102/4A
This document recommends design criteria for the Flight Deck Alerting System. The FAS shall enhance safety of flight by providing early crew recognition of aircraft system or component status or malfunction as well as of crew operational error. The FAS, therefore, relates to aircraft configuration and flight phase as well as the aircraft systems. To fulfill this objective, the FAS must attract the attention of the crew, must state with clarity the nature and location of the problem, and must be highly reliable and thoroughly responsive to the operational requirements and environment. Wherever possible, it should provide guidance as to the corrective action.
2016-11-23
WIP Standard
AS407E
To specify minimum requirements for Fuel Flowmeters for use primarily in reciprocating engine powered civil transport aircraft, the operation of which may subject the instruments to the environmental conditions specified in Section 3.3. This Aeronautical Standard covers two basic types of instruments, or combinations thereof, intended for use in indicating fuel consumption of aircraft engines as follows: TYPE I - Measure rate of flow of fuel used. TYPE II - Totalize amount of fuel consumed or remaining.
CURRENT
2016-10-13
Standard
J2892_201610
This document establishes standard graphical symbols and color conventions for use in either still (static) or animated graphics used for communicating service information. This document’s purpose is to communicate conventions for using those symbols and colors to accurately and consistently communicate intended information via graphics-based documentation. These practices are intended for use in service procedures, assembly instructions, training materials, and similar applications when trying to minimize the amount of human natural language text used within the document. The still and animated graphical conventions referenced should support effective communication via paper and “traditional” electronic media. The conventions can also extend to documenting via additional electronic delivery paradigms such as Augmented Reality (AR).
2016-10-03
WIP Standard
ARP4102/12B
This document specifies requirements for an Airborne Landing Guidance System (ALGS) electronic device. This equipment shall derive relative aircraft position and situation information for flight along precision three-dimensional paths within the appropriate coverage area. The precision three-dimensional path may be an ILS straight-in look-alike path or a complex, curved path. The requirements are applicable to electronic devices capable of receiving signals or other information from one or more sources, including but not limited to ILS, MLS, GNSS, or IRU inputs.
2016-09-28
WIP Standard
ARP4102/11D
This document recommends criteria for Airborne Windshear Systems, including operational objectives, characteristics and functional requirements. The recommendations of the document apply to transport aircraft, and describe the operational objectives of windshear alerting systems, situational displays, guidance systems and avoidance/detection systems.
2016-09-28
WIP Standard
ARP4102/13B
This document recommends criteria for a system designed to manage and communicate information via data link to support flight operations.
2016-09-28
WIP Standard
ARP4102/5SECT3A
This document recommends design criteria for the flight deck installation of electrically signaled flight control systems on fixed wing airplanes.
2016-09-28
WIP Standard
ARP4102/5SECT1A
This document recommends design criteria for the flight deck installation of electrically signaled engine control systems.
CURRENT
2016-08-29
Standard
AS264F
The desired system for aircraft instrument panel and cockpit lighting is one that will furnishlight of adequate intensity and distribution under all conditions of external lighting so that the crew may read instrumentation, placards, check lists, manuals, maps, instrument color coding, distinguish controls, etc., without undue interference with their vision outside of the aircraft.
CURRENT
2016-08-02
Standard
J284_201608
This SAE Recommended Practice covers the safety alert symbol intended for use on construction and industrial equipment as defined in SAE J1116 and on agricultural tractors and machinery as defined in ASABE S390.
CURRENT
2016-06-28
Standard
J2830_201606
This recommended practice describes a process for testing the comprehension of static (i.e., fixed or non-dynamic) symbols for all ground vehicles, for both OEM and aftermarket products. With advancing display technology, it is now possible to display dynamic symbols (e.g., a spinning beach ball to show that a process is ongoing, or a diagram showing energy distribution in hybrid vehicles). Such graphics are outside of the scope of this recommended practice, though extensions of this process may be useful for testing them. However, several symbols which occupy the same space on a display may change state without movement (e.g. play/pause button); these are within the scope of this recommended practice. The process described in this recommended practice includes criteria that are used to identify how well the perceived meaning matches the intended meaning for a representative sample of drivers.
2016-05-05
WIP Standard
J2948
This SAE Recommended Practice establishes guidelines for the operation of automotive keyless ignition systems with the goal of helping to minimize user instigated errors. For the purpose of this Recommended Practice, user instigated errors may include: • the inability to start and stop the vehicle propulsion system, • exiting the vehicle with the automatic transmission in a non-parking gear, • exiting the vehicle while the vehicle propulsion system is enabled, • exiting the vehicle while the vehicle propulsion system is disabled, but the accessory or electrical systems are active. To help minimize these errors, this Recommended Practice contains design recommendations pertaining to uniform labeling, operating logic, indication of vehicle ignition/control status, and physical control characteristics of keyless ignition systems. This Recommended Practice applies to keyless ignition controls permanently mounted in passenger cars, MPVs, and trucks 10 000 GVWR and under.
CURRENT
2016-03-16
Standard
AS6296
This SAE Aerospace Standard (AS) specifies minimum performance standards for Electronic Flight Information System (EFIS) displays that are head-down and intended for use in the flight deck by the flight crew in all 14 CFR Part 23, 25, 27, and 29 aircraft. This document is expected to be used by multiple regulatory agencies as the basic requirement for a technical standard order for EFIS displays. The requirements and recommendations in this document are intended to apply to, but are not limited to, the following types of display functions: Primary Flight and Primary Navigation displays, including vertical situation and horizontal situation functions. Displays that provide flight crew alerts, which may include engine instrument, aircraft systems information/control. Control displays including communication, navigation and system control displays.
2016-02-10
WIP Standard
ARP4927A
This SAE Aerospace Recommended Practice (ARP) provides guidance to achieve the optimum integration of new aircraft systems which have an impact on the cockpit layout or crew operating procedures. This process may also be used for modification of existing cockpits.
2016-02-03
WIP Standard
ARP6377
Develop and propagate recommended practices for the design, development, testing and implementation of head worn displays in piloted airborne platforms
CURRENT
2016-02-03
Standard
J2976_201602
This recommended practice is intended to provide industry technical personnel with an overview of vehicle speedometer system accuracy and offset requirements and odometer system accuracy requirements. Speedometer and odometer systems covered by this document are integrated into a vehicle's electrical and electronics system, assembled directly into the vehicle by the OEM, and use rotational data from at least one vehicle wheel that is appropriately converted into longitudinal vehicle speed and distance traveled information. This standard is limited to radial ply tires on new (as manufactured) cars, light trucks, and medium duty trucks. Other methods for measuring vehicle speed and distance traveled may be used provided they meet the performance recommendations herein. Any local market regulatory requirements must be met and shall supersede this document. Service parts are beyond the scope of this recommended practice.
2016-01-25
WIP Standard
AIR6373
pilots, air traffic controllers, dispatchers, aviation meteorologists
2016-01-18
WIP Standard
ARP4101/8A
This document recommends criteria for standardization of flight deck interior doors and their operation which will provide optimum use under normal and emergency conditions.
2016-01-18
WIP Standard
ARP4102/10B
This document presents criteria for flight deck controls and displays for airborne collision avoidance systems providing vertical-only guidance, and provides design guidance for operational, functional, and installation characteristics and requirements for airborne collision avoidance systems in existing and future aircraft.
2015-12-03
WIP Standard
J1757-2
Set-up a consistent geometry and requirements for measuring the Vehicles HUD, covering the AR-HUD performance.
CURRENT
2015-10-08
Standard
J1810_201510
This SAE Standard describes those factors which affect the accuracy and reliability of voltage indicating units and electrical indicating and sending units for fuel level, pressure, and temperature suitable for off-road, self-propelled work machines as described in SAE J1116 and agricultural tractors as defined in ASAE S390. Indicating units are divided into two groups, fully sealed and partially sealed. Serviceable lighting is not covered by this document unless otherwise specified. No ISO document has been found to be compatible.
2015-10-07
WIP Standard
J3113
SAE Jxxxx provides principles and a process for developing icons for use in electronic displays related to Off Road Work Machines as stated defined in SAE J 1116. Following the process insures that icons are derived from ISO registered graphical symbols or ISO compliant non-registered graphical symbols.
2015-08-20
WIP Standard
AS8034C
This SAE Aerospace Standard (AS) specifies minimum performance standards for all types of Electronic Displays and Electronic Display Systems that are intended for use in the flight deck by the flightcrew in all 14 CFR Part 23, 25, 27, and 29 aircraft. The requirements and recommendations in this document are intended to apply to all installed electronic displays and electronic display systems within the flight deck, regardless of intended function, criticality, or location within the flight deck, but may also be used for non-installed electronic displays. This document provides baseline requirements and recommendations (see section 2.3 for definitions of “shall” and “should”). This document primarily addresses hardware requirements, such as electrical, mechanical, optical, and environmental. It does not address system specific functions.
CURRENT
2015-07-28
Standard
AS8055A
This SAE Aerospace Standard (AS) specifies minimum performance standards for airborne binocular Head-Up Displays (HUDs) in fixed wing (14 CFR part 23, 25) aircraft; while this document is also applicable to rotorcraft (14 CFR part 27, 29) additional performance standards may be required for rotorcraft. This aerospace standard covers basic display standards, but does not include specific application requirements. Specific applications can include flight instrumentation, navigation, engine and system status, alerting, surveillance, communication, terrain awareness, weather, enhanced vision, synthetic vision and other displays. This document covers criteria for conformal and non-conformal HUD systems that are intended for use in the flight deck by the pilot or copilot. Display minimum performance characteristics are specified for standard and other environmental conditions for the purpose of product qualification.
CURRENT
2015-06-18
Standard
J2364_201506
This document applies to both Original Equipment Manufacturer and aftermarket route-guidance and navigation system functions for passenger vehicles. It establishes two alternative procedures, a static method and an interrupted vision method, for determining which navigation and route guidance functions should be accessible to the driver while the vehicle is in motion. These methods apply only to the presentation of visual information and the use of manual control inputs to accomplish a navigation or route guidance task. The document does not apply to visual monitoring tasks which do not require a manual control input, such as route following. Voice-activated controls or passenger operation of controls are also excluded. There are currently no compelling data that would support the extension of this document to in-vehicle systems other than navigation systems.
CURRENT
2015-05-07
Standard
J1757/1_201505
The scope of this SAE Standard is to provide methods to determine display optical performance in all typical automotive ambient light illumination - with focus on High Ambient Contrast Ratio, which is critical for display legibility in a sunshine environment. It covers indoor measurements and simulated outdoor lighting. It is not the scope of this document to set threshold values for automotive compliance. However some recommended values are presented for reference.
CURRENT
2015-01-12
Standard
ARP5740
This SAE Aerospace Recommended Practice (ARP) addresses the information content for the electronic presentation of data linked weather Meteorological (MET) information used in the cockpit. It defines guidelines for the electronic presentation of MET information (including text, graphics, textures, icons, and symbology) to the flight crew. This ARP is applicable to certified equipment for the electronic display (whether installed or portable) of MET information in the cockpit. This ARP also provides a set of symbols that illustrate the depiction of data linked MET information on flight deck display systems such as Navigation Displays, Multi-function Displays, and Electronic Flight Bags. These recommendations complement standard symbology guidelines for airborne applications already in existence (see reference section for applicable documents).
CURRENT
2015-01-08
Standard
J1791_201501
This SAE standard applies to self-propelled driver operated sweepers and scrubbers as defined in SAE J2130-1.
2014-06-23
WIP Standard
ARP60494
This ARP covers the system design, human interface considerations, and hardware performance recommendations and requirements for touch interactive electronic display systems installed in the cockpit/flight deck for use by pilots. System design and human interface considerations include: identification of functions that could use and benefit from touch interactions, the pilot and cockpit/flight deck environment characteristics that impact usability, and specific pilot interface characteristics such as touch mode, single and multi touch applications, feedback, latency, potential human error, and basic usability. Also addressed are workload, fatigue, and transition from hard to soft control considerations. Hardware issues cover performance aspects of touch screens installed on cockpit/flight deck displays. This ARP is intended to cover Part 23 and 25 category airplanes as well as Part 27 and 29 rotorcraft.
Viewing 1 to 30 of 347

Filter

  • Standard
    347

Subtopics