Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 209
2017-10-02
Magazine
Boot camp at Georgia Tech Integrating new students into the aero design team helps keep Georgia Tech in winning form. A fresh start Keeping it simple is a key component in turning around the fortunes of Kettering University's Formula SAE team. No secrets to success for Michigan Baja Racing Hard work and a focus on winning are the simple reasons why the team keeps coming out on top in Baja SAE.
2017-09-01
Magazine
Knowledge wins at 2017 Formula SAE Lincoln The University of Pennsylvania and Texas A&M win the Electric and Internal Combustion Classes, respectively. Flying high at SAE Aero Design New for the twin 2017 competitions in Texas and Florida was a requirement for planes registered in the Regular Class to carry "passengers." Pedal to the metal at Formula SAE Michigan More than 100 university teams compete in this premier student racecar design competition combining static and dynamic events. Removing bumps on the path to fully automated driving Inaugural workshop for new AutoDrive Challenge student competition held at SAE World Headquarters.
2017-04-03
Magazine
All about electronics UniBo Motorsport of the University of Bologna in Italy details its self-developed electronic control units and strategy for use in its Formula SAE cars. Golden Bear strong A dispatch from the coalfields of West Virginia describes the unique set of challenges faced by the Baja SAE team at West Virginia University Institute of Technology. And the SAE Collegiate Cup for best communicators goes to… The Kettering University's snowmobile team for its outstanding presentation to the SAE Mid-Michigan Section.
2016-11-01
Magazine
The comeback car The Cal Poly Pomona FSAE Team implements several measures to help overcome setbacks and achieve a podium finish at Formula SAE Lincoln. Going deep The uBox concept car developed as part of Clemson's Deep Orange program features a uniquely formed roof part. Creating a monster North Dakota State University SAE Clean Snowmobile Challenge team brings to life a war-torn engine pieced together with parts from another.
2016-10-03
Magazine
All about the engine The University of Wisconsin-Madison team increases engine displacement and implements exhaust gas recirculation to maintain winning ways in SAE Clean Snowmobile Challenge. Fluid mechanics of diesel injection studied at Penn State Special photography method helps student researchers get a better look at spray patterns. Under new management A senior-heavy squad from Minnesota State University, Mankato, takes a different approach to team dynamics and jumps 34 spots to 17th overall at the 2016 Formula SAE Michigan competition.
2016-08-04
Magazine
Special report: Lightweighting Uncovering the next actions in the industry's grand mass-reduction campaign. CAE's next leap forward With 3D simulations skyrocketing, engineers are looking forward to highly-optimized toolsets to keep pace with complexity. SAE Convergence 2016 Preview Meet the disruptors, network with peers and learn about the latest tech solutions that are rapidly changing the auto industry. "Military-grade" aluminum Jaguar, Exa say simulation to eliminate prototypes by 2020 OEMs expand testing of FEV variable-compression ratio engine Growth of FCVs and EVs tied to infrastructure Bolt EV seat design cuts weight, delights tall passengers Rolls-Royce reveals a Vision of its future Volvo bets on new PowerPulse, not 48V, to attack turbodiesel 'lag' SEAT to spearhead VW's new platform and 48V technology Dr. Jay Baron of CAR discusses vehicle lightweighting and predicts the outcome of the crucial CAFE mid-term review.
2016-07-07
Magazine
Technology report Quest for 'new-car smell' dictates interior-materials changes Doing it again-this time with 10 After a successful decade-long collaboration on 6-speed transaxles, Ford and GM partner again on an all-new 10-speed automatic. Here's a look inside the gearbox and the project. Large-scale additive manufacturing for rapid vehicle prototyping A case study from Oak Ridge National Laboratory bridges the 'powertrain-in-the-loop' development process with vehicle systems implementation using big area additive manufacturing (BAAM). Global Vehicles Steel-intensive Mazda CX-9 sheds mass, debuts novel turbo setup
2016-05-17
Magazine
Base-engine value engineering for higher fuel efficiency and enhanced performance Continuous improvement in existing engines can be efficiently achieved with a value engineering approach. The integration of product development with value engineering ensures the achievement of specified targets in a systematic manner and within a defined timeframe. Integrated system engineering for valvetrain design and development of a high-speed diesel engine The lead time for engine development has reduced significantly with the advent of advanced simulation techniques. Cars poised to become 'a thing' Making automobiles part of the Internet of Things brings both risks and rewards. Agility training for cars Chassis component suppliers refine vehicle dynamics at the high end and entry level with four-wheel steering and adaptive damping.
2016-05-05
Magazine
New dawn at Honda R&D President Yoshiyuki Matsumoto aims to invigorate Honda's technology and product-development organization with 'full soul.' Automated driving meets regulation: NHTSA and the next 50 years The challenges and opportunities on the road to 'zero deaths' demand a new level of federal automotive safety technical standards, and a new safety-defect reporting and recall system. NHTSA and the U.S. Congress must act boldly and quickly to make it happen. Autonomous driving meets regulation: Hands off, eyes off, brain off Euro NCAP'S president warns that without coherent policies, the growing availability of automated technologies may result in piecemeal technology development-and unintentional consequences. Designer yin meets engineer yang Efficient and effective vehicle development means even closer collaboration between the two former sparring partners.
2016-04-01
Magazine
CMU goes full futuristic A student team from Carnegie Mellon University offers its take on a proposed new mode of transportation involving tubes and pods. Three CDS teams win MOMENTUM design awards Teams from British Columbia Institute of Technology, University of Idaho and Pakistan Navy Engineering College win competition for best description of an innovation for their 2016 SAE Collegiate Design Series vehicle entry. These pro tips can earn your CDS team point Members of SAE International's Collegiate Design Series staff offer 10 tips to help teams fully realize their potential at competition.
2016-02-01
Magazine
Stanford goes solar down under Team takes sixth place in Bridgestone World Solar Challenge to cap a rigorous two-year design and development program. Taking the lead Being in charge of an SAE Student Chapter entails everything from organizing meetings to issuing 'nastygrams.' A winning video from a winning Collegiate Design Series team The defending champion of the Formula SAE Michigan competition, Oregon State University, has found another way to win. SAE U.K. Section co-hosts lecture series 'starring' NASA engineer/expert Dr. Ravi Margasahayam of NASA is the engineer responsible for ensuring payload safety for the Space Shuttle and the International Space Station.
2015-12-01
Magazine
Uncertainty quantification The technique is a must for next-generation simulation tools. Oil-pump sizing Researchers from Hinduja Tech investigate options for low friction and power consumption. The future of Indian commercial aviation The growth in traffic that airport modernization has supported has also made a significant contribution to the local and national economies, while the improved infrastructure has been positive for the perception of India in the global market. Driving EVs toward lower cost The race ison to reduce battery and electric-drive systems cost while improving efficiency. Powering on Rolls-Royce's Chief Engineer discusses new technologies that inspire current R&D design and evaluation work as part of its strategic roadmap for future big commercial programs. HMIs extend beyond the cab Telematic functions are being integrated into multi-function user interfaces.
2015-11-03
Magazine
Behind-the-scenes methods have made MRacing, the team from the University of Michigan-Ann Arbor, a consistent contender in the Formula SAE student design competition. Presenting their winning aero design to the SAE International Board of Directors, University of Akron students tell a story of engineering excellence and resiliency. Presenting their winning aero design to the SAE International Board of Directors, University of Akron students tell a story of engineering excellence and resiliency. Eleven students from Montreal university journey to Seattle for an education on aerospace technology and aerospace careers.
2015-11-03
Magazine
Active in aero Several automakers-notably Mercedes-Benz and Audi - used the Frankfurt Motor Show stage to reveal sleek vehicles that aggressively employ active aerodynamic elements and other advances to reduce drag. Composites permeate inside and out Composite materials are gaining popularity for both unseen structural components and for exterior eye candy. Powertrain testing: coping with complexity With increasing use of electrical components to extend the performance of conventional combustion engines, powertrain development has never been more complicated. The good news is that test and development engineers are harnessing advanced simulation techniques and computer processing to develop the most efficient and fun powertrains ever. Can ads help in vehicle-to-vehicle rollout? Porsche unveils new downsized, boosted 3.0-L boxer six. Johnson Controls, Faurecia envision interiors for autonomous driving. Jaguar enters performance crossover SUV segment.
2015-10-01
Magazine
Finding success on an international track Student members of the University of Missouri's Formula SAE team are learning firsthand that international collaboration is the future of engineering. A vision. A car. A cause. New Mexico State Aggies are tough enough to race pink. CyberAuto Challenge helps close talent gap Having a supply of high-quality young engineers is key to beefing up the automotive industry's cyber defenses.
2015-09-01
Magazine
UMich-Ann Arbor team takes home Baja season's Iron Team Award Cornell University also had a strong 2014 season, but not strong enough to fend off Michigan Baja Racing. Georgia Tech and Warsaw University were double-winners at SAE Aero Design competitions University of Akron and University of Cincinnati were the other winners at the twin 3-class competitions, the former setting a record in the process. West Coast teams win 2 of 3 Formula SAE events Oregon State captures its fifth crown while Jose State enjoys its first overall victory and UPenn tops the electric field. Taking action early to conquer the STEM crisis Interest in STEM subjects falls precipitously as students progress through elementary and middle school.
2015-08-18
Magazine
The advent of stop-start technology As environmental concerns grow for R&D teams, OEMs look to bring the strategy further into the mainstream. Recycling opportunities for hybrid/electric vehicle lithium-ion batteries With limited reserves and strict environmental regulations, re-cyclers look to established extraction means to reuse, recycle, and dispose of the used batteries. Cameras look to go the distance Automakers seek vision systems with greater distances, improved reliability, and more functionality, thanks to ruggedized complementary metal-oxide semiconductor technologies. Getting right with composites With composites now a mainstay in most new aircraft de-signs, the engineering emphasis has switched from understanding if they work to thinking through the most efficient way to manufacture them, such as using design-for-manufacturing software.
2015-08-05
Magazine
Making sense of autonomy Industry offers a range of sensors that will free humans from many tasks while also improving reliability, though devising strategies that meet demanding requirements without breaking the bank is no easy challenge. Life-cycle planning-Design and calibration for ultimate efficiency The ultimate power of Big Data technologies relies on the implementation of new strategies. Unlike a traditional engine calibration process, in which only calibration test data and model simulation data are used, multiple source data introduced into the adaptive engine calibration process contributes to efficiency and cost reduction. The complicated future of off-highway engines Developing an optimum engine is getting tricky now that the European Union has established a Stage V for off-highway engines, and the U.S. has not. What effect will this have on future engine designs?
2015-06-03
Magazine
Executive Viewpoints Off-highway industry executives from companies such as BorgWarner, Perkins, Cummins, and Danfoss reflect upon challenges inside, and outside, the industry, and what technologies, innovations, and strategies will need to be implemented to thrive into the long-term future. 16th Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2015-05-05
Magazine
Democratizing hybrid technologies Engineers continue to wring efficiency and mass out of their latest electrified propulsion systems with the aim of mainstreaming the technology. Automakers see possibilities, limits for gesture controls Recent concepts have shown the possibilities of gesture for controlling infotainment functions but the need for industry standards and control simplification complicate development. Ferrari massages 458 to create 488 GTB Ferrari engineers have further refined the 458 Italia model with a new turbocharged and downsized engine and revised aerodynamics to create the 488 GTB.
2015-04-01
Magazine
Deep thinking about deep space NASA is mining the rich fields of knowledge and creativity in the minds of university students to improve living and working conditions in space. Rise of the underdogs Problem-plagued effort last year spurs Baja SAE team from VIT University of India to overhaul itself and its car. Materials, data-aq packages among choices touted in Collegiate Cup contest Central Michigan's Baja team, which did some impressive materials analyses, takes home the SAE Mid-Michigan Section's trophy as part of that professional group's Engineers Week activities. Toyota looks for more from college students than high GPA "Those that participate in an SAE related-activity display passion for the automotive industry, and these candidates are ideal for our organization."
2015-03-25
Magazine
Bringing it all together Ian Adcock catches up with GKN's newly appointed president, Group Technology, Rob Rickell. Graphene Supreme Ian Adcock discovers what role graphene is likely to play in the vehicles of tomorrow. What lies beneath? Automotive Design looks into chassis developments that are designed to ensure local preferences are catered for globally.
2015-02-02
Magazine
Taking on the Valeo Innovation Challenge Two Canadian teams-the University of Ottawa and the University of Waterloo-finished in the top 3 among about 1,000 other universities from around the world in this challenge devoted to spurring innovative ideas for transportation. Colorado State University designs fuel-cell plug-in hybrid system Competing in the EcoCAR2 competition using a Chevrolet Malibu, the Colorado State team designed a system that features a 15-kW polymer electrolyte membrane fuel cell system, an 18.9-kW•h/177-kW lithium-ion battery, and a 145-kW motor. Cal State Fullerton combines art and engineering Team's submission on its Formula SAE car won first place in the second annual Generation Auto video contest organized in part by SAE International. Collaborative research project leads to potentially swarming VTOL UAVs The AVIGLE VTOL (vertical takeoff and landing) unmanned aerial vehicle was developed via collaboration by a variety of entities for a variety of applications.
2014-12-04
Magazine
Making virtual vehicle design a reality A new virtual design approach for commercial vehicle concepts allows for purposeful design and integration of new concepts and technologies on the component level in an existing product portfolio, while not neglecting the need for standardization and modularity.
2014-12-02
Magazine
2015 Hot Technologies Our annual year-end review of new and significant technology applications for the upcoming model year's vehicles. Can Toyota's Mirai be the next Prius? Toyota's first fuel-cell car has a range of 300 miles, fills up in 5 minutes, and accelerates from 0 to 60 mph in about 9 seconds. Integrated automotive gateway can enable connected cars One of the biggest challenges connected cars pose is the integration of information and consumer electronics into the car and ensuring connectivity among them.
2014-11-30
Magazine
Riding on a high Rudi Schurmans and Ben Patel head up Tenneco's suspension and clean air divisions. Ian Adcock discovers what the automotive future holds for them Driverless revolution has begun! Breakthrough Photonic radar promises greater accuracy at lower cost, Ian Adcock discovers Winds of change are here Simulating aerodynamics will make a step-change in vehicle design, as Stephen Remondi, President and CEO of EXA, explains to Ian Adcock
2014-10-01
Magazine
Buckeye Current's TT triumph The Ohio State University reprised its third-place finish in the 2014 TT Zero for all-electric motorcycles, beating some of the pros on the world's toughest race circuit. Kettering FSAE team improved as season progressed Lowest priced may not mean the best, but certainly not the worst. Leveling the field: getting #girlsinstem Despite facing the brunt of gender segregation, women are forging ahead and dramatically improving STE M, both academically and professionally. Mercedes-AMG's SLS departure opens door to new GT Powering the car is an all-new biturbo 4.0-L V8 available with two power levels: hot (GT) at 340 kW (456 hp) and exceedingly hot (GTS) at 375 kW (503 hp).
2013-11-01
Magazine
New contender for the World Solar Challenge Splitting the solar power supply from the aerodynamics was the innovative approach taken by the U.K.-based Cambridge University Eco Racing Team. Mobility in the 21st Century for India: planning and creating multimodal transportation systems India's rapidly growing population has made transportation systems unable to effectively keep up with demand, losing the country untold man-hours and wasting money. 2014 Corvette: 460 hp, 30 mpg, 1 g, $52,000 No other sports car can match the C7's combination of performance, value, and overall efficiency. Chief Engineer Tadge Juechter provides insight on executing a masterpiece.
2013-10-22
Magazine
Taming automotive complexity with digital optimization From helping automotive engineers develop lighter structures to delivering fewer defects in manufacturing, digital tool providers are continuing their push upstream in the engineering process.
2013-08-30
Magazine
Originality revs up Formula SAE Michigan teams More than 100 Formula SAE teams vied for top honors at the annual Michigan competition that spotlights one-of-a-kind open-wheel racecars designed and built by student engineers. American manufacturing in the hands of UNF students University of North Florida students design and build Formula vehicles for nationwide competition focused on challenging the minds of future engineers. Solar EV thunder down under Michigan is aiming for its first victory in next month's 2013 World Solar Challenge with a new asymmetrical racecar that is ready for 1860 mi (2990 km) in the Australian sun. Solar Impulse Team's next challenge: to circle the globe The next world-girdling version of the fuel-less flier will rely on featherweight polymers and composites.
Viewing 1 to 30 of 209

Filter

  • Magazine
    209