Criteria

Text:
Sector:
Category:
Display:

Results

Viewing 1 to 20 of 20
2015-07-27 ...
  • July 27-28, 2015 (8:30 a.m. - 4:31 p.m.) - Warrendale, Pennsylvania
  • September 24-25, 2015 (8:30 a.m. - 4:30 p.m.) - Seattle, Washington
Training / Education Classroom Seminars
The September offering of this seminar will be conducted at the Sheraton Seattle Hotel and held in conjunction with the SAE 2015 AeroTech Congress & Exhibition. Register for this offering and you can register to attend the SAE 2015 AeroTech Congress & Exhibition for 25% off the classic member event rate.
2015-08-06 ...
  • August 6, 2015 (8:30 a.m. - 4:30 p.m.) - Tysons, Virginia
Training / Education Classroom Seminars
Design reviews are required for ISO 9001:2000 compliance and compatible automotive and aerospace specifications. They are becoming increasingly important in product liability litigation and are accepted as a cost-effective best practice and an effective application of knowledge management, valuable for accelerating the maturity of new products. This seminar describes how formal design reviews can improve products by uncovering potential problems before they are discovered at a later stage of development or application, when the costs of correction are much higher.
2015-08-10 ...
  • August 10-12, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
  • December 9-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
RMS (Reliability-Maintainability-Safety-Supportability) engineering is emerging as the newest discipline in product development due to new credible, accurate, quantitative methods. Weibull Analysis is foremost among these new tools. New and advanced Weibull techniques are a significant improvement over the original Weibull approach. This workshop, originally developed by Dr. Bob Abernethy, presents special methods developed for these data problems, such as Weibayes, with actual case studies in addition to the latest techniques in SuperSMITH® Weibull for risk forecasts with renewal and optimal component replacement.
2015-08-17 ...
  • August 17-18, 2015 (8:30 a.m. - 4:30 p.m.) - Rosemont, Illinois
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 1:00 pm In the past few decades, product liability law has dramatically changed the manufacturer's outlook in the design and manufacture of product. The concept of safety and reliability has been altered from a purely engineering/manufacturing concept to a legal/manufacturing approach. This new approach requires an understanding of legal concepts as related to the manufacturing and design process. The engineer's role has shifted to include a safety audit analysis to minimize the existence of a product defect and/or to defend the product in a way that is responsive to the legal concerns.
2015-08-19 ...
  • August 19-20, 2015 (8:30 a.m. - 4:30 p.m.) - Rosemont, Illinois
  • November 23-24, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Failure Mode and Effects Analysis (FMEA) is a systematic method for preventing failure through the discovery and mitigation of potential failure modes and their cause mechanisms. Actions are developed in a team environment and address each high: severity, occurrence or detection ranking indicated by the analysis. Completed FMEA actions result in improved product performance, reduced warranty and increased product quality.
2015-09-10 ...
  • September 10-11, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Design of Experiments (DOE) is a methodology that can be effective for general problem-solving, as well as for improving or optimizing product design and manufacturing processes. Specific applications of DOE include identifying proper design dimensions and tolerances, achieving robust designs, generating predictive math models that describe physical system behavior, and determining ideal manufacturing settings. This seminar utilizes hands-on activities to help you learn the criteria for running a DOE, the requirements and pre-work necessary prior to DOE execution, and how to select the appropriate designed experiment type to run.
2015-10-08 ...
  • October 8-9, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Note: Last day of class ends at approximately 12:30 pm In today’s highly competitive and liability minded environment, Design Reviews (DR) are a must for all major mobility industries such as Automotive, DOD, Aerospace, Agriculture, Recreation, Marine and Rail. While Design Reviews are becoming increasingly important in product liability litigation, they also serve as an effective way to transfer organizational best practices for specific concerns and issues.
2015-12-03 ...
  • December 3-4, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Engineers are taught to create designs that meet customer specifications. When creating these designs, the focus is usually on the nominal values rather than variation. Robustness refers to creating designs that are insensitive to variability in the inputs. Much of the literature on robustness is dedicated to experimental techniques, particularly Taguchi techniques, which advocate using experiments with replications to estimate variation. This course presents mathematical formulas based on derivatives to determine system variation based on input variation and knowledge of the engineering function.
2015-12-07 ...
  • December 7-8, 2015 (8:30 a.m. - 4:30 p.m.) - Troy, Michigan
Training / Education Classroom Seminars
Engineers and managers involved with product development are constantly challenged to reduce time to market, minimize warranty costs, and increase product quality. With less and less time for testing, the need for effective accelerated test procedures has never been greater. This course covers the benefits, limitations, processes, and applications of several proven accelerated test methods including accelerated reliability, step stress, FSLT (Full System Life Test), FMVT® (Failure Mode Verification Testing), HALT (Highly Accelerated Life Testing), and HASS (Highly Accelerated Stress Screening).
Training / Education Classroom Seminars
FEA has been used by engineers as a design tool in new product development since the early 1990's. Until recently, most FEA applications have been limited to static analysis due to the cost and complexity of advanced types of analyses. Progress in the commercial FEA software and in computing hardware has now made it practical to use advanced types as an every day design tool of design engineers. In addition, competitive pressures and quality requirements demand a more in-depth understanding of product behavior under real life loading conditions. This seminar introduces one of the advanced types of FEA: vibration analysis.
Training / Education Classroom Seminars
SAE International is pleased to offer this professional development seminar in conjunction with the SAE A-6 Aerospace Actuation, Control and Fluid Power Systems Committee meeting May 10 - 14, 2015 in Charleston, South Carolina. This four hour short course provides an overview of hydraulic system design of typical business and commercial aircraft. Topics will include the principles, system architectures, power sources, and the main components and technologies of hydraulic systems including hydraulic power generation, filtration, fluid storage, distribution, sensing and control.
Training / Education Classroom Seminars
This four-hour short course intends to present an overview of electrically powered flight control actuation systems, covering commercial applications. The scope covers issues related to the mechanical design of actuators themselves, with limited reference to their control electronics. Additionally, this course will provide participants an understanding of the design considerations behind these actuation systems.
Training / Education Classroom Seminars
This interactive Failure Modes and Effects Analysis (FMEA) product and process seminar introduces the participant to the analytical process by which potential failure modes, failure effects and causes of failure are identified. Engaging in a systematic method of studying failure can improve future outcomes. The severity, occurrence and probability of detection of a failure mode are used to prioritize which failure modes are most critical. Methodology is introduced for dealing with the effects of failure. The Design FMEA link to manufacturing is explained and amplified in terms of downstream Process FMEA.
Training / Education Classroom Seminars
This four hour short course will provide an overview of design considerations for electrohydrostatic actuation for transport and business aircraft applications. The instructors will present the critical topics of electrohydrostatic actuation (EHA) from a systems development perspective (V-Approach). Beginning with aircraft system requirements, the instructors will then guide participants through EHA subsystem requirements, component design, component verification test, aircraft integration, and use.
Training / Education Classroom Seminars
During the past decade reverse engineering has become a common and acceptable practice utilized by many original equipment manufacturers and suppliers. This course focuses on the application of modern technologies used to decode the design details and manufacturing processes of an existing part in the absence of the original design data. It emphasizes the real-life practice of reverse engineering in the aerospace industry from both scientific and legal points of view. Attendees will learn the applicability and limitations of reverse engineering through case studies and hands-on exercises.
Training / Education Classroom Seminars
This seminar will include a review of statistical theory and present statistical methods, which are used to better select and/or analyze Tolerance Stack-ups. The Probability (RMS) Method, the Monte Carlo Simulation Technique and tolerance optimization techniques will be discussed along with guidelines on which method(s) to use in given situations. Attendees will also view a demonstration of a microcomputer Monte Carlo Simulation program that analyzes the effects of form and assembly variation on the quality of a finished product.
Training / Education Classroom Seminars
The Finite Element Analysis (FEA) has been widely implemented by automotive companies and is now used by design engineers as a design tool during the product development process. Design engineers analyze their own designs while they are still in the form of easily modifiable CAD models to allow for quick turnaround times and to ensure prompt implementation of analysis results in the design process. When used properly, the FEA becomes a tremendous productivity tool helping design engineers reduce product development time and cost.
Training / Education Classroom Seminars
This course is designed to help product design personnel create tolerance stacks for parts and assemblies that use Geometric Dimensioning & Tolerancing. Those who will benefit most are designers and engineers who are responsible for creating the GD&T callouts for engineering drawings and product models, and who want to be more confident in how the assigned geometric tolerances interact and stack up. The course begins with a quick review of Y14.5 concepts, and then introduces the benefits and uses of a tolerance stack spreadsheet.
Training / Education Classroom Seminars
This in-depth course covers the GD&T system per ASME Y14.5-2009, including why it reduces costs, how to interpret the symbols, and how to apply these tolerances correctly. Participants will learn the basic definitions and rules, the importance of datums, the meaning of each tolerance, and sample ways of gaging geometric tolerances. The class is mainly lecture, with many practice exercises. Participants are encouraged to bring sample parts and/or prints (with or without GD&T already applied) to class for questions. Time is reserved for discussing the application of GD&T to your parts/prints.
Training / Education Classroom Seminars
Over the last three decades Computational Fluid Dynamics (CFD) has developed into a sophisticated tool for analyzing fluid flow and other thermal sciences related phenomena. Most educational courses on this topic focus on the fundamentals of CFD, but sound knowledge of the fundamentals is not enough to make effective use of CFD in practical engineering product development. This seminar provides significant practical considerations in using CFD for product development and is designed to help engineers extract best benefits from CFD while avoiding potential pitfalls.
Viewing 1 to 20 of 20

    Filter