Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 70
2017-08-03
Magazine
Collaborating on diesel emission control Stringent fuel-efficiency and criteria-pollutant standards call for new combustion strategies. The SwRI-led Advanced Combustion Catalyst and Aftertreatment Technologies consortium reinvents existing technologies and experiments with new catalysts to meet standards. More intelligence equals more efficiency, enhanced functionality Advanced systems require renewed focus on architectures, processors, sensors and networks. Appraising the potential for platooning in the U.S. Researchers from the National Renewable Energy Laboratory perform statistical analysis based on a large collection of real-world U.S. truck usage data to estimate the fraction of total miles that are technically suitable for platooning. Connected commercial vehicles bring cybersecurity to the fore Connectivity, automation and electrification will largely drive vehicle developments in the coming years, according to experts presenting at the revamped SAE COMVEC 17.
2017-04-06
Magazine
Connectivity continues its advance More OEMs and Tier 1 suppliers are focusing on embedded telematic systems, hoping to displace aftermarket hardware. Tailoring fuel injection to control NOx The next big step to help heavy-duty diesel engines meet stricter emissions regulations involves adapting the fuel-injection system to the combustion needs. Active on safety Crash-avoidance technologies are vital "building blocks" to automate commercial vehicles, implement truck platooning and ultimately achieve zero accidents. Engineering with simulation and data Companies are discovering new simulation techniques, especially optimization; the next step is to combine simulation with sensor data and predictive analytics to create even more robust off-highway equipment.
2016-12-02
Magazine
Autonomous plows ahead Agriculture, construction, mining-even marine-are advancing autonomous technology to improve the productivity and safety of vehicles on the job. Expediting engine design Simulation tools drive development of the most complex, fuel- efficient and powerful engines ever seen in off-highway applications. Industry 4.0: The smart factory arrives The plants that produce vehicles and their high-tech systems are increasingly employing intelligent systems, Big Data and advanced analytics to improve quality, safety and efficiency. The future is not so far-off Enhanced Cat 3500 engine boosts power 20%, trims fuel usage by 10% Phase 2 GHG rules driver for advanced technology, alternative fuels Eaton demonstrates waste heat recovery, variable valve actuation for HD diesels Hyliion develops add-on hybrid system for semi-trailers that reduces fuel consumption by 30% Tech-heavy Iveco Z Truck concept spawns 29 patents EPA's Grundler talks Phase 2 regs
2016-08-05
Magazine
Clearing the air Sensors, diagnostics and controls advance to help trap emissions. Bringing the heat on cooling technologies Electronic controls, variable-speed fans cool engines, heat aftertreatment systems. 3D printing machines can't be built fast enough In the additive manufacturing world, the costs of components are dropping, the technology is becoming more reliable and parts are fabricated faster, allowing industries beyond aerospace to adopt additive technologies, says Oak Ridge Lab's Ryan Dehoff.
2016-04-08
Magazine
Software's role continues to expand Design teams use different technologies to create new software and link systems together. Emissions regulations and engine complexity With the European Commission announcing a Stage V criteria emissions regulation for off-highway, scheduled to phase-in as earlly as 2019, there will be an end to a brief era of harmonized new-vehicle regulations. Will this affect an already complex engine development process? Evaluating thermal design of construction vehicles CFD simulation is used to evaluate two critical areas that address challenging thermal issues: electronic control units and hot air recirculation.
2016-02-05
Magazine
Off-highway hybrids: Opportunities and challenges With oil prices declining and emissions regulations in North America 'stabilized,' is there a place for hybrid powertrains in this new world of cheap oil? Looking for a better image Display advances are helping to reduce operator fatigue. Charging up electrified powertrains Control technologies race forward while batteries improve and adopt standard sizes. Measuring and accounting for suspension TARDEC teamed with SEA Ltd. to develop a system to measure the suspension parameters, center of gravity, and moments of inertia of wheeled vehicles in the never ending quest to model and predict vehicle dynamic behavior. Looking at mobility in 2050 Cuneyt L. Oge begins his term as 2016 SAE International President with a vision about the future of auto- and aero-mobility.
2015-12-02
Magazine
Improving heavy-duty engine component efficiencies Cylinder deactivation can improve fuel economy by using a reduced number of cylinders that operate at higher loads and thermal efficiency, while other cylinders are turned off, when the engine operates at partial load conditions. A switching roller finger follower is one of the technologies that help make it work. Pumping up hydraulic capabilities Electrohydraulic advances keep coming as distributed electronics flex their muscle. Tracking the trends in commercial vehicle communications Industry insiders at Molex offer what they think the future may hold for heavy-duty components in 24/7 communications systems. ADAS system validation It is crucial that different advanced driver assistance systems functionalities interact seamlessly with existing electronic control unit (ECU) networks.
2015-08-05
Magazine
Making sense of autonomy Industry offers a range of sensors that will free humans from many tasks while also improving reliability, though devising strategies that meet demanding requirements without breaking the bank is no easy challenge. Life-cycle planning-Design and calibration for ultimate efficiency The ultimate power of Big Data technologies relies on the implementation of new strategies. Unlike a traditional engine calibration process, in which only calibration test data and model simulation data are used, multiple source data introduced into the adaptive engine calibration process contributes to efficiency and cost reduction. The complicated future of off-highway engines Developing an optimum engine is getting tricky now that the European Union has established a Stage V for off-highway engines, and the U.S. has not. What effect will this have on future engine designs?
2015-06-03
Magazine
Executive Viewpoints Off-highway industry executives from companies such as BorgWarner, Perkins, Cummins, and Danfoss reflect upon challenges inside, and outside, the industry, and what technologies, innovations, and strategies will need to be implemented to thrive into the long-term future. 16th Annual Product Guide Top products from throughout the industry covering technologies such as Powertrain & Energy, Hydraulics, Electronics, and Testing & Simulation.
2015-04-08
Magazine
Hydraulics still in control of off-highway needs Engineers continue to master electronic controllers and software to help systems manage engine speeds and boost efficiency, to the ultimate benefit of both OEMs and end-users. Off-highway calibration challenges-big and complex As the final set of Tier 4 regulations kick in for engines greater than 750 hp (560 kW), calibration efforts must contend with complex engine and aftertreatment systems. Engine manufacturers and service providers deal with this complexity, but does it need to be so? DEF delivery modelling for SCR systems Researchers characterize a 0-D model of a urea delivery module, oriented to model-based control and to the simulation of the system response to fault injections finalized to diagnosis validation.
2014-12-04
Magazine
Making virtual vehicle design a reality A new virtual design approach for commercial vehicle concepts allows for purposeful design and integration of new concepts and technologies on the component level in an existing product portfolio, while not neglecting the need for standardization and modularity.
2014-11-06
Magazine
Calibration and complexity Off-highway engine applications continue to increase in complexity to meet emissions regulations and fuel economy targets as well as to take advantage of advances in electrification and mechatronics. The model-based calibration process has become the industry standard. ECU advances take many paths Controllers are evolving rapidly, with a range of microcontrollers distributed throughout the vehicle Working remotely A new electrohydraulic steering technology that offers energy efficiency improvement, increased productivity, enhanced safety, and adaptability to operating conditions also has the capacity to support remote operation of a compact wheel loader.
2014-06-05
Magazine
Watching for ways to stand above the crowd Sensors monitor a broad range of parameters to help powertrain design teams add features and improve performance.
2014-02-06
Magazine
What's New at ConExpo/IFPE A preview of some of the new products and technologies that companies plan to showcase at this year's ConExpo-Con/Agg, which is co-located with the IFPE fluid-power event in Las Vegas from March 4-8. Injection strategies for improving emissions characteristics Premixed charge compression ignition reduces NOx and soot emissions, but requires the optimization of the injection timing and pressure, fuel mass in pilot injection, and EG R rate. Systems that talk together, are efficient together Design teams take a holistic view, linking engines, transmissions, hydraulics, and aftertreatment systems to boost efficiency and performance. Managing the deluge of data The model-based development (MBD) process has been a key enabler of technical advancement in the transportation industry; however, the MBD process leads to the generation of large volumes of data artifacts and work products.
2013-12-12
Magazine
Achieving efficiency via virtual validation Model-based design and V-Cycle-based development processes address the need for managing complexity, and to some extent, efficiency in product development.
2013-09-05
Magazine
Operators see bright screens in their future HMIs borrow from tablets, phones to help operators perform a broad range of tasks Small engine landscape Kubota engineers developed new small-displacement engines that adopt a common-rail system while optimizing the combustion system and injection characteristics. Sensitive to safety A growing number of digital sensors are among the tools being used to make sure failures are rare and injuries are even more infrequent.
2013-06-13
Magazine
National Instruments Keeping pace with increasingly intelligent machines Molex Autonomous equipment positioned to be next disruptive technology Sauer-Danfoss Speed wins IAV Engineering in the virtual world Mentor Graphics What will save us from electrical system design complexity? Perkins Designing for diversity TTControl Intelligent controls and connectivity Federal-Mogul Technology strategies for the future Dana Innovation that addresses global megatrends dSPACE Can you imagine your life without challenges? Tenneco Technology meets regulatory challenges Southco Shifts in design energy Bosch Rexroth Manufacturing and logistical excellence MathWorks Continuous improvement to meet new challenges
2012-10-11
Magazine
Digital engineering for Tier 4 With the final phase-in of the U.S. EPA Tier 4 emissions standard set to take effect by 2015, off-highway engine developers are accelerating product introductions. Design challenges remain for manufacturers even after the final phase-in while CAE software providers improve technology.
2012-08-09
Magazine
FEA of light-vehicle cab's hydraulic mount Using finite element analysis on a cab's hydraulic mount can shorten product development time and reduce development costs significantly.
2012-07-05
Magazine
After diesel A look at some offshoots-hybrids, HCCI, and alternative fuels-to the ever-popular diesel engine in the off-highway industry. Software gains (hydraulic) power Development processes are being revised as software becomes a centerpiece of electrohydraulic designs. Virtual sensing gets real As emissions regulations get more strict, emissions measurement must get more precise for onboard diagnostics, engine control, and model-based controller design.
2012-06-14
Magazine
Designing the whole Connecting model-based system engineering through PLM tools to CAD, FEA, and physical test is on the horizon.
2012-05-03
Magazine
Perkins Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Sustainability matters Cummins Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Ready for more Eaton Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Unskew the talent system and build a sustainable future Sauer-Danfoss Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Value-added engineering takes time out of the equation Bosch Rexroth Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Focusing on technology, for sustainability Mentor Graphics Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Knowledge-keep it, don't lose it Dana Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Sustainability driven by technological innovation and global footprint MathWorks Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Moving toward sustainable product development with model-based design TDT Insights into sustainability: Environmental, economic, and/or societal goals for a successful, and long-lasting, off-highway industry. - Aerodynamic design methodology meets commercial challenges in off-highway industry
2012-04-19
Magazine
Combating complexity with model-based development System and software life-cycle management processes and tools that encompass all phases of the product, from concept to end of life, are essential to meet today's innovation and quality demands.
2012-03-29
Magazine
High-performance polymers and biofuel compatibility During the material selection process for engine components such as fuel rails, filter housings, and connectors, engineers need to take into account not only the basic tenets of metal-to-plastic conversion, but also the type of fuel and its impact on the performance of the materials.
2012-02-23
Magazine
Hydraulic architecture strategies Researchers compare two different rule-based power-management strategies, in terms of their resultant fuel consumptions, through a simulation study as applied to a hybrid hydraulic multi-actuator displacement controlled system.
2012-02-02
Magazine
Easy to control Designers grab a range of technologies to create controls that are simpler for operators to use. Designing quiet off-highway equipment OEMs and suppliers are using new materials and innovative designs to reduce NVH for both vehicle operators and the environment. Using FEA in off-highway design The process of considering weld redundancy in virtual simulation is a complex way of ensuring that weldment design is robust enough to prevail over accidental weld redundancy that might occur during manufacturing. Efficient and effective leadership Frank O. Klegon, a 30-year SAE member and former product development VP at Chrysler, begins term as chief elective officer of SAE International. Making battlefield targets disappear The use of 'smart' special materials has the potential to radically alter the way military platforms are defended, and used.
2012-01-12
Magazine
Cummins digs in with high-speed diesel Cummins started with a clean sheet, and some legacy technology, for what it describes at the most powerful highspeed diesel ever built.
2011-12-15
Magazine
Safety steps up Electronic controls let suppliers improve safety without sacrificing reliability.
2011-11-03
Magazine
Tier 4 for large bore Engineers show that a pre-turbine aftertreatment system offers clear and distinct benefits in terms of compact, cost-effective emissions reductions. Programmed for safety and reliability The software that adds features and functions is becoming more reliable as standards and new techniques transform design processes. Electrohydraulics improve with new lift-control strategy Fuel consumption, torque delivery, and emissions can all be improved through flexible control of the valve timing, duration, and lift.
2011-10-13
Magazine
CAE simulation and test advance together With increasing pressures on companies to develop products faster with less cost, CAE simulation and physical test forge stronger ties.
Viewing 1 to 30 of 70