Criteria

Text:
Sector:
Content:
Display:

Results

Viewing 1 to 30 of 238
2017-01-03
Article
NRL scientists have demonstrated metallic spin filtering at room temperature using ferromagnet-graphene-ferromagnet thin film junction devices.
2016-10-20
Article
The fusing of emerging technologies from the aerospace materials sector and biological sciences are now, for the first time, heading toward the prospect of growing parts, systems, and, ultimately, perhaps whole aircraft.
2016-10-20
Article
One of the biggest issues in bringing forward new designs is the length of time that it takes to agree to a new specification, research and evaluate the alternative features and configurations, and then embark on a development program that will take the design to flight testing and ultimately operational service.
2016-10-18
Article
Researchers from the U.S. Naval Research Laboratory's Optical Sciences Division and Material Science Division have detected acoustic emissions from cracks in riveted lap joints using a distributed feedback fiber laser-acoustic emission sensor.
2016-07-31
Article
Made of steel and aluminum, NASA's Airvolt test stand was designed and fabricated to help researchers anticipate system integration challenges and verify and validate electric propulsion components.
2016-05-31
Article
Stanford engineering professor David Lentink plans to use a new wind tunnel to learn the magic of bird flight and apply it to building better aerial robots.
2016-03-14
Article
As airlines strive to move more and more people faster and faster, the talk of a future supersonic aircraft for commercial purposes is getting louder and louder.
2016-01-30
Article
GKN believes that flight tests will prove 8% wing drag reduction in natural laminar flow wing concepts.
2016-01-29
Article
Electric propulsion is on the verge of causing the biggest changes in aviation since the advent of the jet engine.
2016-01-03
Article
The latest version of the company's FloEFD solution has updated features such as improved mesh handling, an enhanced transient solver, and an interface to Abaqus FEA software for stress analysis.
2016-01-03
Article
Purdue University has developed a new system that allows a 3D printer to produce functioning products with enclosed electronic and motorized components and customized devices such as a computer mouse molded to a user's hand.
2015-11-09
Article
Design and build time of the UAV is said to be reduced 50%, and its is use of lightweight materials the enabler to reaching speeds over 150 mph.
2015-11-08
Article
The company continues to commit and breathe new life into its 40-year old fourth-generation fighter aircraft.
2015-07-23
Article
Physics-based robot simulation leveraging stochastic optimization and game theory will support new NASA missions.
2015-06-18
Article
Passenger Experience automates cabin completion processes with essential intelligent “building blocks” capturing rules, regulations, and manufacturing knowledge to automate cabin interior design, development, and delivery.
2015-06-09
Article
For the design process of the class of aircraft known as an efficient supersonic air vehicle, particular attention must be paid to the propulsion system design as a whole, including installation effects integrated into a vehicle performance model.
2015-04-29
Article
One of the key differentiators of the EP-8100 for commercial and military simulation and training is the system’s ability to use customers’ existing databases.
2015-04-24
Article
Boeing is in the midst of several months of flights with its ecoDemonstrator 757 in a first-round effort to evaluate new technologies in 2015 that are expected to reduce environmental effects on natural laminar flow as a way to improve aerodynamic efficiency while reducing noise and carbon emissions.
2015-04-24
Article
The engine bay is an essential component of the AgustaWestland AW609 tilt rotor nacelle, since it determines the performance of the engine and assures safe maneuvers for every flight condition.
2015-04-10
Article
Zen Technologies and Rockwell Collins recently unveiled a next-generation rotary wing simulator to serve the “burgeoning need” of the military flight simulation market in India. The companies had previously signed a Memorandum of Understanding to combine their strengths in simulation and training to offer advanced and high-fidelity aviation solutions.
2015-04-02
Article
The company expects to better support the use of additive manufacturing, or 3D printing, by releasing new OptiStruct solver capabilities for topology optimization. The company claims this new technology is the first tool developed specifically for designers of lattice structures.
2015-03-24
Article
In the area of electronics enclosures, traditional metal structures conduct and spread heat over large surfaces, but composites act as insulation. Heat generated by components causes internal temperatures to rise and has detrimental impact on the performance and reliability of the electronics.
2015-02-25
Article
Delcam’s 2015 version of its PowerINSPECT inspection system includes automatic collision avoidance, faster import of large CAD files, quicker preparation of longer inspection reports, and improved display of results from point-cloud data, plus many other customer-requested enhancements.
2015-02-12
Article
NASA has expanded its use of Exa's PowerFLOW software for the simulation of concepts to reduce aircraft noise within NASA's Environmentally Responsible Aviation project.
2015-01-12
Article
3-D laser scanning from NVision helped a certified FAA repair station document its work on a passenger jet part with such precision that the station was able to obtain the necessary FAA approval for the repair in much less time than is usually required.
2014-12-22
Article
Boeing has begun construction on a 7000-ft² addition to its research and technology center in Alabama. The Center for Applied Simulation and Analytics (CASA) will serve as a hub for Boeing, its research partners, and academic collaborators to create and develop simulation and analytics technologies, providing advanced simulation of Boeing products from concepts through operations.
2014-11-25
Article
AVX has released a new version of its SpiCalci simulation software, an engineering tool that calculates performance characteristics and parameters for its switch mode power supply capacitors.
2014-10-03
Article
Since the UAV is completely electrically powered, the analysis of the energy management of the integrated electrical system was critical to the development of the UAV.
2014-09-30
Article
European researchers examine simulation-based solutions for the manufacture of large-scale, liquid-resin-infusion composite substructures for aircraft and possibly ground vehicles.
2014-08-25
Article
Coriolis Composites and SAFRAN Aircelle worked together on a thrust reverser component demonstrator made with carbon-fiber-reinforced plastic (CFRP) material and an AFP process. This component is an inner fixed structure, made of two monolithic carbon skins and a core.
Viewing 1 to 30 of 238

Filter

  • Article
    238