Criteria

Text:
Content:
Display:

Results

Viewing 151 to 180 of 1087
2015-01-22
Article
The web-based methodology can provide a quick way for companies to share design tools and shorten development cycles, but many companies remain cautious about moving to the cloud, though it’s being tried out by small and mid-sized suppliers.
2015-01-20
Article
Nissan's luxury division charts its sporty car course with glimpse of next Q60 Coupe.
2015-01-19
Article
Green Hills Software adds virtualized, accelerated graphics support for Renesas R-Car H2 processors in the Integrity Multivisor virtualization solution.
2015-01-19
Article
OpenSynergy releases its Fast-boot Android solution to decrease time-to-market for HMI products and to shorten start-up delays for drivers.
2015-01-14
Article
Car put on display is based on electrical and mechanical components from a Renault electric vehicle "city car" simply as a proof of process. Much testing and refinement remain. Help is being provided by Oak Ridge National Laboratory and SABIC.
2015-01-12
Article
3-D laser scanning from NVision helped a certified FAA repair station document its work on a passenger jet part with such precision that the station was able to obtain the necessary FAA approval for the repair in much less time than is usually required.
2014-12-22
Article
Boeing has begun construction on a 7000-ft² addition to its research and technology center in Alabama. The Center for Applied Simulation and Analytics (CASA) will serve as a hub for Boeing, its research partners, and academic collaborators to create and develop simulation and analytics technologies, providing advanced simulation of Boeing products from concepts through operations.
2014-12-16
Article
Researchers at the University of Wisconsin recently developed a modeling, simulation, and visualization framework, called Chrono, aimed at enabling high performance, physics-based, analysis of ground vehicle mobility.
2014-12-12
Article
AVX updates SpiCalci simulation software, an engineering tool that calculates performance characteristics and parameters for switch mode power supply capacitors.
2014-12-12
Article
Siemens extends the range of applications for its Sinamics S120 drives family with software-based advanced technology functions.
2014-12-10
Article
Using advanced supercomputers and the largest X-ray imaging system in the western hemisphere, the team of researchers developed and validated software models for fuel injectors. One the most difficult to understand engine phenomenon, these validated models are useful for simulating fuel injectors and are now available to engine developers.
2014-12-10
Article
CAE Design and Failure Analysis of Automotive Composites, a new book from SAE International, offers 12 technical papers covering three main areas of expertise, including static loading, dynamic and impact loading, and blast loading of automotive composites.
2014-12-01
Article
Design and manufacturing challenges are becoming more complex and multi-dimensional, prompting design teams to expand their efforts to collaborate. This change is being aided by a shift to 3-D models, but that transition has issues that highlight the complexity of linking various groups.
2014-11-25
Article
AVX has released a new version of its SpiCalci simulation software, an engineering tool that calculates performance characteristics and parameters for its switch mode power supply capacitors.
2014-11-17
Article
The new release of MapleSim from Maplesoft makes it substantially easier to explore and validate designs, create and manage libraries of custom components, and use MapleSim models within the engineering toolchain.
2014-11-03
Article
Mechanical Simulation Corp.’s CarSim 9.0 vehicle dynamics software upgrade features major enhancements to the math models, visualization tools, database, and overall architecture.
2014-10-13
Article
Researchers at VE Commercial Vehicles Ltd. in India employed downsizing to design a commercial vehicle exhaust system using the ANSYS CFD tool Fluent, resulting in a 14.1% reductions in both size and volume and a mass savings of 2%.
2014-10-13
Article
Mid-racing season switch by Ferrari to new simulation software from rFpro supplements the limited track testing permitted under FIA rules.
2014-10-10
Article
The evolution of the DS into a brand separate from Citroën was marked at the 2014 Paris Motor Show by the Divine DS concept, a four-door compact sedan of about the same length as the DS4 at 4.21 m (13.8 ft) long. The Divine DS is designed to show what customers can expect of DS from now on.
2014-10-10
Article
The crossover is based on the European C-segment PSA EMP2 platform, powered by a plug-in hybrid drivetrain, producing a total of 500 hp (373 kW), developed by Peugeot Sport.
2014-10-08
Article
The model-based systems engineering approach allows Renault to evaluate, throughout the development phases, the key attributes of the complete vehicle including the engine, transmission, actuators, and chassis.
2014-10-08
Article
Continuing with design themes established with last year’s Q30 concept, the Infiniti Q80 Inspiration hybrid concept that debuted at the 2014 Paris Motor Show also showcases what’s on the horizon from the luxury brand in the powertrain and connectivity realms.
2014-10-07
Article
The crossover concept is an important vehicle for Toyota, demonstrating the Japanese automaker's desire for more "engaging" design—a key attribute particularly in the highly competitive European C-segment market.
2014-10-07
Article
Revealed at the 2014 Paris Motor Show, the concept is based on the XL1 but gets performance touches such as the powerful Ducati V2 engine and a racing-inspired chassis.
2014-10-03
Article
Since the UAV is completely electrically powered, the analysis of the energy management of the integrated electrical system was critical to the development of the UAV.
2014-10-02
Article
The U. S Department of Transportation/NHTSA Vehicle Research and Test Center has commissioned dSPACE to supply an in-lab GPS simulation system. GPS simulation is used in the development and testing of numerous intelligent driving and traffic systems, including collision avoidance, advanced driver-assistance systems, navigation, and V2X communications.
2014-09-30
Article
European researchers examine simulation-based solutions for the manufacture of large-scale, liquid-resin-infusion composite substructures for aircraft and possibly ground vehicles.
2014-09-26
Article
The task facing calibrators is not getting any easier. “The complexity of calibration exploded exponentially when the Tier 4 emissions regulations were introduced,” explained Paolo Di Martino, Business Unit Director for Diesel Systems for IAV North America.
2014-09-24
Article
The use of quenched and tempered steels for dumper bodies reduces weight and fuel consumption while increasing payload capacity and wear life.
2014-09-22
Article
Internal combustion engines are poised for dramatic breakthroughs in improving efficiency with lower emissions, due in part to low-temperature combustion regimes. Such regimes show great efficiency and emissions potential, but they present optimization and control challenges.
Viewing 151 to 180 of 1087

Filter

  • Article
    1087