Criteria

Text:
Content:
Display:

Results

Viewing 91 to 120 of 1066
2015-09-11
Article
Endurica targets tire and rubber product developers with new software release. CAE software adds features for the analysis of rolling structures, self-heating, wrinkling, and cavitation.
2015-08-26
Article
There is more pressure than ever on heavy-truck engineers to find and create significant improvements in fuel economy and reduce tailpipe greenhouse gas emissions. Aerodynamic opportunities exist with technologies such as active grille shutters and truck platooning—and simulation will help to optimize these designs.
2015-08-24
Article
Even as simulation and virtual design tools get ever more sophisticated, brick-and-mortar test facilities are as important as ever.
2015-07-23
Article
Physics-based robot simulation leveraging stochastic optimization and game theory will support new NASA missions.
2015-07-09
Article
The special-edition Deutz-Fahr 7250 Warrior features the Hella Module 70 LED Generation IV and is claimed to be the first tractor in the market to incorporate this latest-generation LED package.
2015-06-23
Article
Elektrobit releases an easier-to-use toolkit that enables development of multimodal user interfaces with advanced graphics, plus voice-, touch-, and gesture-based commands, for sophisticated human-machine interface (HMI) systems.
2015-06-18
Article
Passenger Experience automates cabin completion processes with essential intelligent “building blocks” capturing rules, regulations, and manufacturing knowledge to automate cabin interior design, development, and delivery.
2015-06-09
Article
New surface scanning technology is being utilized by rFpro to produce digital road models with unprecedented accuracy and speed to help make autonomous driving safer.
2015-06-09
Article
To reduce cost and improve performance in engines, Honeywell is offering a software tool to embed virtual sensors in engines, using first-principles models that resides in the engine control unit.
2015-06-09
Article
The AUTOSAR standard is all about improving embedded electronic systems in vehicles, but did you know that it also promotes the early testing of software code? The early testing and validation of embedded software reduces the number of ECU prototypes and additional test systems needed down the road, and it benefits the whole development process.
2015-06-09
Article
For the design process of the class of aircraft known as an efficient supersonic air vehicle, particular attention must be paid to the propulsion system design as a whole, including installation effects integrated into a vehicle performance model.
2015-05-14
Article
Wirth Research has formed a strategic partnership with U.K. trucking company Eddie Stobart to deliver a truck and trailer aerodynamic kit.
2015-05-05
Article
At Intermat, LiuGong announced that it was in a 60-day countdown before its new Global Research and Development Center opens in June at Liuzhou, also home to the company's global headquarters.
2015-04-29
Article
One of the key differentiators of the EP-8100 for commercial and military simulation and training is the system’s ability to use customers’ existing databases.
2015-04-28
Article
More and more, Honda vehicles are getting their start on the CAD screens of American designers based in central Ohio, rather than those in Japan. In this episode of SAE Eye on Engineering, Senior Editor Lindsay Brooke looks at the busy year for Honda engineers in Raymond, OH. 
2015-04-27
Article
ANSYS 16.0 enables companies to validate complete virtual prototypes of complex systems to address emerging engineering challenges—from Internet of Things to advanced materials to embedded software.
2015-04-24
Article
Boeing is in the midst of several months of flights with its ecoDemonstrator 757 in a first-round effort to evaluate new technologies in 2015 that are expected to reduce environmental effects on natural laminar flow as a way to improve aerodynamic efficiency while reducing noise and carbon emissions.
2015-04-24
Article
The engine bay is an essential component of the AgustaWestland AW609 tilt rotor nacelle, since it determines the performance of the engine and assures safe maneuvers for every flight condition.
2015-04-19
Article
Off-highway vehicles may not move at the same speed as trucks or other large road vehicles, says Exa's Doug Hatfield, but that in itself presents challenges that on-road vehicles do not face.
2015-04-17
Article
COMSOL Multiphysics version 5.1 supports the creation of multiphysics models and simulations as well as the building and sharing of easy-to-use simulation apps.
2015-04-17
Article
Delcam will launch in May the 2015 R2 version of its PowerSHAPE Pro software, which includes new options for reverse engineering as well as improvements to speed up and simplify the editing of product designs to make them more suitable for manufacture.
2015-04-17
Article
PowerINSIGHT 2.0 from Exa Corp. provides real-time collaboration to reduce the risk of product compromise and costly late-stage design changes. The upgrade derives compelling presentations from terabytes of simulation data rapidly and accurately, the company claims.
2015-04-10
Article
Zen Technologies and Rockwell Collins recently unveiled a next-generation rotary wing simulator to serve the “burgeoning need” of the military flight simulation market in India. The companies had previously signed a Memorandum of Understanding to combine their strengths in simulation and training to offer advanced and high-fidelity aviation solutions.
2015-04-10
Article
A new tool to precisely simulate the thermal processes in Lanxess’s weight-saving Tepex continuous-fiber-reinforced thermoplastic composite was announced by the company at the recent Plastics in Automotive Engineering conference at Mannheim, Germany.
2015-04-06
Article
Dramatic new styling for a sporty new Civic coupe presages the all-new tenth-generation model, which will first arrive in four-door sedan form in the fall of this year, to be followed by two-door coupes and five-door hatchbacks.
2015-04-02
Article
The company expects to better support the use of additive manufacturing, or 3D printing, by releasing new OptiStruct solver capabilities for topology optimization. The company claims this new technology is the first tool developed specifically for designers of lattice structures.
2015-04-01
Article
To equip its flagship sedan for the challenge, Cadillac designers and engineers have built the CT6 on a unique vehicle architecture, an aluminum-intensive body structure that is fully one-third steel. Twenty-one patents are pending for the new full-size, rear-wheel-drive, transverse-engine configuration, a variation of GM’s Omega II platform.
2015-03-31
Article
The Senvol Database is a searchable database for industrial 3-D printing machines and materials.
2015-03-30
Article
The car will enter production in 2016, likely as a 2017 model. It's underpinned by Ford's flexible vehicle architecture and features an array of Lincoln-exclusive technology features. A concept is being unveiled at the 2015 New York International Auto Show this week.
2015-03-24
Article
In the area of electronics enclosures, traditional metal structures conduct and spread heat over large surfaces, but composites act as insulation. Heat generated by components causes internal temperatures to rise and has detrimental impact on the performance and reliability of the electronics.
Viewing 91 to 120 of 1066

Filter

  • Article
    1066