Criteria

Text:
Content:
Display:

Results

Viewing 61 to 90 of 1087
2016-07-31
Article
Made of steel and aluminum, NASA's Airvolt test stand was designed and fabricated to help researchers anticipate system integration challenges and verify and validate electric propulsion components.
2016-07-28
Article
Modeling and simulation continue to help suppliers and OEMs provide systems and vehicles that do more work while conserving fuel, reducing emissions and keeping costs in check. A broad range of tools come into play as engines and aftertreatment systems move through the design cycle.
2016-07-15
Article
Known internally as UTSB, the ultra-thin seats were designed in-house by GM and are supplied by Magna Seating.
2016-07-08
Article
Using Exa's latest simulation software, Jaguar is aiming to achieve full-vehicle verification exclusively through digital simulation by 2020, going straight from a virtual model to the final physical production vehicle.
2016-07-01
Article
The latest release of ANSYS' Savant and EMIT software gives engineers the power to design and predict the performance of installed antenna and radio frequency (RF) environments quickly and more accurately for a range of products—from wearable and mobile devices to autonomous vehicles.
2016-06-20
Article
As attributes and functions within vehicles become ever more interdependent, the CAE community is finding ways to increase multi-physics simulations and deliver credible multi-domain optimization. New types of engineers are emerging as a result.
2016-06-20
Article
Making extensive use of 3D printing techniques, the Vision Next 100 is Rolls-Royce's design and engineering teams' forward-reaching concept of super-luxury mobility over the next century.
2016-06-11
Article
Novel oxidation ovens could triple production-line throughput while slashing energy use.
2016-05-31
Article
Stanford engineering professor David Lentink plans to use a new wind tunnel to learn the magic of bird flight and apply it to building better aerial robots.
2016-05-13
Article
CoTherm from ThermoAnalytics facilitates the flow of information between CAE simulation products to streamline CAE workflow, improve simulation time and reduce test time and cost.
2016-04-27
Article
Take-it-to-the-limit testing is typically reserved for vehicle development teams, but Jaguar's route and the sensational topography clearly gave Automotive Engineering good insight into F-Pace's dynamic capabilities and its four-year development.
2016-04-20
Article
Experts say Phase Change Material (PCM) formulated for high latent heat capacity can provide cabin warmth for a typical U.S. daily commute, with residual capacity insulated for an EV parked during an eight-hour workday.
2016-04-14
Article
Animals, birds, and mammals are natural-born innovators that inspire vehicle engineers to create novel technologies.
2016-04-11
Article
Automakers are increasingly employing digital crash test dummies made of zeroes and ones to take the big hits in virtual vehicles.
2016-03-31
Article
Ford's 6.7-L diesel V8 has yet to obtain certified power ratings, but it's expected to exceed 900 lbft of torque, necessitating an upgrade of the company's dyno sleds to enable SAE J2807 vehicle tow testing.
2016-03-22
Article
Moving quickly to expand the appeal of the all-new, fourth-generation MX-5 Miata roadster introduced last year, Mazda revealed prior to the 2016 New York auto show a folding hardtop version of the car called MX-5 RF, for “retractable fastback.”
2016-03-14
Article
As airlines strive to move more and more people faster and faster, the talk of a future supersonic aircraft for commercial purposes is getting louder and louder.
2016-03-12
Article
Jeep Design is taking seven new concept vehicles, including two interesting pickups, to the Utah off-road festival where the hardest-core Jeep enthusiasts gather annually.
2016-03-06
Article
Engineers across disciplines will realize step-change improvements in the way they develop products using ANSYS 17.0.
2016-03-06
Article
According to the DS E-TENSE design team, the E-TENSE is not really a concept car because it offers a glimpse of design features that will be seen on future production models. One of the interior air vents is the same as that used on the recently revised DS3.
2016-03-06
Article
At the 2016 Geneva Show Audi unveiled the Q2, the smallest in the company’s Q series SUVs to date. It's based on VW Group's MQB architecture.
2016-03-04
Article
The Integrated and Open Development Platform from AVL features the first integration product, Model.CONNECT.
2016-03-01
Article
The growing role of electronics and software is altering the design process, requiring a greater focus on validation and verification, particularly to meet the stringent demands of off-highway environments.
2016-02-12
Article
KISTERS has released version 2016 of its 3DViewStation Desktop, which features modern user-interface, high-performance 3D-viewing, advanced analysis, and digital mockup.
2016-02-08
Article
Developers are starting to adapt complex design simulations into easy to use tablet apps. Could gear box designs using non-linear stress analysis, fatigue predictions, and CFD be coming to your smartphone?
2016-02-02
Article
Elektrobit will develop the Augmented Reality (AR) Creator software solution, which is based on sensor data fusion and software framework for augmented reality head-up displays.
2016-02-02
Article
An automotive platform solution from Renesas Electronics and TTTech provides an electronic control unit development platform for advanced driver assistance systems.
2016-02-02
Article
EngineLab’s EL129 control units for engine simulation and testing have a range of input and output options and can be adapted for flexible control system development.
2016-02-02
Article
A powerful tool chain from dSPACE supports engineering and validating of embedded software of complex advanced driver assistance systems.
2016-01-30
Article
GKN believes that flight tests will prove 8% wing drag reduction in natural laminar flow wing concepts.
Viewing 61 to 90 of 1087

Filter

  • Article
    1087