Criteria

Text:
Content:
Display:

Results

Viewing 271 to 140 of 140
2013-08-14
Article
Simulation made it possible to quickly analyze design iterations and optimize exterior surfaces such as the Tesla Model S front, A-pillars, and other design features critical for aerodynamics.
2013-08-08
Article
To leverage economies of scale, it is common practice in the industry to share the same platform for multiple vocations, and also adapt different components such as suspension, frame components, engine, cab, and other body components. To accomplish this, one platform has to be developed to have robustness for many different applications, such as bus and/or utility vehicles.
2013-08-05
Article
SEAT Design Director Alejandro Mesonero-Romanos knows exactly what he wants when he embarks on the creation of a new car: 'Proportions: they are 70% of the success of any new model.'
2013-07-31
Article
Collier Research Corp.’s Version 6.4.5 of HyperSizer composite structural analysis and optimization software not only runs faster than previous versions, but it also is based on a reconfigured core technology with built-in intelligence that produces more accurate answers with less user input.
2013-07-31
Article
Michigan is aiming for its first victory in next month’s 2013 World Solar Challenge with a new asymmetrical racecar that is ready for 1860 mi (2990 km) in the Australian sun.
2013-07-22
Article
The new features of MSC Software Corp.’s MSC Nastran 2013 deliver customization and broader solution capabilities that generate time savings in automotive and aerospace simulation workflows.
2013-07-18
Article
Researchers address some aspects regarding the modeling of a hydraulic circuit of a commercial excavator.
2013-07-17
Article
The potential for electromagnetic interference (EMI) is increasing due to many factors: an increased number of embedded control units, higher onboard diagnostic (OBD-II) data rates, increased number of controller area network lines, etc. A new generation of simulation tools makes it possible to predict and correct in advance major things that can go wrong with the electronics.
2013-07-17
Article
Simulation technology has enabled the Swedish manufacturer to test more vehicle configurations at a lower cost and with less disruption than it took to test just one configuration using its previous process, according to MSC Software.
2013-07-12
Article
Extensive simulation and highly focused testing facilities are proving vital to enable Federal-Mogul to successfully keep pace with new demands placed by OEMs on engine components’ suppliers.
2013-07-10
Article
Engineers and other specialists at Ford of Europe’s Aachen, Germany, Advanced Technology Center are concentrating on what materials and powertrains will be needed—and which will be feasible—for the vehicles of the 2020s and 2030s.
2013-07-08
Article
Altair's SimLab 12.0, a software tool created specifically as a pre-processor for detailed computer models of complex powertrains, is now offered as part of the company's HyperWorks 12.0 suite of computer-aided engineering software.
2013-06-28
Article
HydraForce’s INTEGR8 line of engineered hydraulic control solutions enables more than 40 hydraulic control scheme specifications by providing engineered circuits featuring optimal flow and directional control valve combinations.
2013-06-28
Article
Version 10 of Boothroyd Dewhurst’s Design for Assembly (DFA) Product Simplification software features an improved user interface for speed and ease of use.
2013-06-18
Article
Italian company Pininfarina has selected Dassault Systèmes’ 3DEXPERIENCE CATIA for Creative Designers application to design and manufacture a new concept car in honor of its honorary chairman, Sergio Pininfarina.
2013-06-10
Article
Mechanical CVTs on LE-Eco and S-Grade models are U.S. firsts for a Toyota. LE-Eco model's 1.8-L four-cylinder engine, with infinitely variable intake-valve lift and timing and higher compression ratio, is said to deliver "over 40 mpg" fuel economy.
2013-06-04
Article
Turboprop engines are gaining popularity for their fuel-consumption advantages, but they also generate substantial noise, so reducing cabin noise to ensure passenger comfort is an important engineering challenge.
2013-06-04
Article
For an AVL internal R&D project, a team was challenged to develop a battery pack configuration that would provide the most efficient battery cooling at the lowest possible cost. Key to this was a good understanding of what was happening inside the pack.
2013-05-30
Article
With oil reserves being consumed at an unprecedented pace as global demand rises and prices on a consistently upward trend, short of a new power source being invented, fuel will remain as the single largest operating cost in aviation.
2013-05-21
Article
KeyMarkUp CAD Viewer from Kubotek USA views and marks up more than two dozen CAD file formats.
2013-05-14
Article
Global Lighting Technologies offers an LED-based ring light that can be integrated into automotive interior lighting such as cup holders and clocks.
2013-05-10
Article
Behr America, Inc.’s analysis tools help automakers reduce climate-control-system blower noise by predicting vehicle noise levels from subsystem measurements, analyzing, and combining input from a large number of systems and locations within a vehicle.
2013-05-09
Article
Grayhill releases Instinct 2.0 gesture recognition library, a software tool that converts multi-touch sensor data into gestures for 3-D image control.
2013-05-07
Article
Many product development organizations have adopted model-based design to meet emissions regulations while reducing fuel consumption and ownership cost.
2013-05-06
Article
No matter how innovative a product is, it must be manufactured efficiently with the highest quality, and be delivered through flexible, efficient supply chains to achieve success.
2013-05-06
Article
Design teams are challenged to optimize the delivery of complex, yet value-generating software while getting new machines to market as fast as possible.
2013-05-06
Article
Many believe that systems engineering principles are indeed the solution to electrical and electronic complexity and that companies who fail to embrace this paradigm will fall behind, or worse.
2013-05-03
Article
The topic of simulation can generate a wide variety of responses depending on who is speaking and their experience with the virtual development environment.
2013-04-29
Article
Embedded systems are providing new levels of efficiency, performance, and safety to off-highway vehicles.
2013-04-18
Article
Automotive engineers have been combining electronics and mechanical systems for years, but they’re still figuring out how to efficiently model and simulate mechatronic systems. Sharing files between disciplines remains an issue along with the challenge of creating models for use in different applications.
Viewing 271 to 140 of 140

Filter

  • Article
    1018