Criteria

Text:
Content:
Display:

Results

Viewing 1 to 30 of 38
CURRENT
2016-11-08
Standard
AS9162
This document identifies the basic elements and provides a standard for structuring operator self-verification programs within the aviation, space, and defense industry for producers of commercial and military aircraft and weapons platforms, space vehicles, and all related hardware, software, electronics, engines, and composite components. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
CURRENT
2016-11-01
Standard
AS9120B
Price increases in effect for this document as of January 2017 reflect a new copyright agreement for use of ISO 9001:2015. This standard includes ISO 9001:2015 quality management system requirements and specifies additional aviation, space, and defense industry requirements, definitions, and notes. It is emphasized that the requirements specified in this standard are complementary (not alternative) to customer and applicable statutory and regulatory requirements. If there is a conflict between the requirements of this standard and customer or applicable statutory or regulatory requirements, the latter shall take precedence.
CURRENT
2016-10-31
Standard
AS9101F
This standard defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the 9100-series standards, the organization's QMS documentation, and customer and statutory/regulatory requirements. The requirements in this standard are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i.e., ISO/IEC 17000, ISO/IEC 17021-1). When there is conflict with these standards, the requirements of the 9101 standard shall take precedence. NOTE 1: In this standard, the term “9100-series standards” comprises the following Aerospace Quality Management System (AQMS) standards: 9100, 9110, and 9120; developed by the IAQG and published by various national standards bodies.
CURRENT
2016-06-17
Standard
RB4A
A guide for the use by companies contracting for design of electronic products with the Department of Defense (DOD) and other government agencies. This Bulletin present concepts and techniques for quantifying electronic equipment reliability. The techniques are responsive to the requirements of various branches of the Department of Defense and are also useful with regard to other Government agencies (e.g., NASA).
CURRENT
2016-06-16
Standard
EIAEP2F
The Electronic Industries Association is the national trade organization representing electronic industry interests in the United States. Its primary mission is to enhance the competitiveness of the American producer. EIA supports and advances national defense, economic growth, technological progress, and all interests of the electronic industries compatible with the public welfare. We represent the full spectrum of manufacturers in the electronic industries, from manufacturers of the smallest electronic part to corporations that design and produce the most complex systems used in defense, space and industry.
CURRENT
2016-06-16
Standard
EIAQAB7
This document has been formulated as a suggested guide in assisting EIA Engineering Department Panels and JEDEC Councils in cooperating with the Defense Department and other Federal agencies in the preparation of suggested reliability requirements for various types of electronic products as part of a program designed to enhance the reliability of defense and related equipment. The document is to be followed merely as a guide and is not intended to limit technical groups in the consideration of the factors to be taken into account in the development of reliability specifications for recommendation to the Government.
CURRENT
2015-05-19
Standard
AS9132B
This standard defines uniform quality and technical requirements relative to metallic parts marking performed using "data matrix symbology" within the aviation, space, and defense industry. ISO/IEC 16022 specifies general requirements (e.g., data character encodation, error correction rules, decoding algorithm). In addition to ISO/IEC 16022 specification, part identification with such symbology is subject to the requirements in this standard to ensure electronic reading of the symbol. The marking processes covered by this standard are as follows: Dot Peening Laser Electro-Chemical Etching Further marking processes will be included, if required. Unless specified otherwise in the contractual business relationship, the company responsible for the design of the part shall determine the location of the data matrix marking. Symbol position should allow optimum illumination from all sides for readability. This standard does not specify information to be encoded.
CURRENT
2014-12-05
Standard
AIR5444A
This SAE Aerospace Information Report (AIR) shall be limited to general information about tin whisker formation on tin plated conductors. It summarizes the mechanisms of metal whisker formation and describes possible conclusions as related to tin plated conductors. It also provides a number of reference documents that describes research and observations of the whisker phenomena, recommendations to prevent its formation and conclusions. The investigation by this task group of AE-8D was initiated by a request of the Naval Air Warfare Center, Indianapolis, Indiana, to determine if the phenomenon of tin whiskers is a problem in aerospace wire and cable.
CURRENT
2014-11-20
Standard
EIA649_1
This document applies to hardware and software and provides CM requirements to be placed on contracts after being tailored by the Acquirer. The requirements have been organized by the following five CM functions: Configuration Planning and Management Configuration Identification Configuration Change Management Configuration Status Accounting Configuration Verification and Audit
HISTORICAL
2014-03-01
Standard
AS9101E
This standard defines requirements for the preparation and execution of the audit process. In addition, it defines the content and composition for the audit reporting of conformity and process effectiveness to the 9100-series standards, the organization's QMS documentation, and customer and statutory/regulatory requirements. The requirements in this standard are additions or represent changes to the requirements and guidelines in the standards for conformity assessment, auditing, and certification as published by ISO/IEC (i.e., ISO/IEC 17000, ISO/IEC 17021). When there is conflict with these standards, the requirements of the 9101 standard shall take precedence. NOTE 1: In this standard, the term “9100-series standards” comprises the following Aerospace Quality Management System (AQMS) standards: 9100, 9110, and 9120; developed by the IAQG and published by various national standards bodies.
CURRENT
2012-07-31
Standard
AS9003A
This standard includes selected quality system requirements from ISO 9001:2008[1] and AS9100:2009 applicable to noncomplex products and associated manufacturing processes. ISO 9001 text incorporated into this standard appears in standard font; while aviation, space, and defense industry additional requirements, definitions, and notes are presented in bold, italic text. The requirements of this standard are intended to be applied in whole, without any exclusions. Compliance with all corresponding AS9100 requirements is considered to meet/exceed compliance with the requirements of this standard. The requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence. The process approach described in ISO 9001 and AS9100 applies to this standard.
CURRENT
2012-05-01
Standard
GEIASTD0005_2A
This Standard establishes processes for documenting the mitigating steps taken to reduce the harmful effects of Pb-free tin finishes in electronic systems. This Standard is applicable to Aerospace, Defense, and High Performance (ADHP) electronic applications which procure equipment that may contain Pb-free tin finishes.
CURRENT
2012-01-31
Standard
AS9104/1
The purpose of this standard is to define the requirements and industry-accepted practices for managing the ICOP scheme, which provides confidence to aviation, space, and defense customers and organizations that their suppliers with certification of their quality management systems, issued by accredited CBs, meet the applicable AQMS standard requirements. The requirements established in this standard are applicable to the IAQG and its three sectors for managing AQMS certification and associated activities. The requirements are applicable to IAQG working groups [e.g., SMS, Other Party Management Team (OPMT)], IAQG member companies, ABs, CBs, Certification Body Management Committees (CBMCs), AABs, TPABs, Training Providers (TPs), and organizations seeking/obtaining AQMS standard certification.
CURRENT
2010-07-01
Standard
AIR5919A
This SAE Aerospace Information Report (AIR) is intended to document and provide access to information obtained by an industry survey. It summarizes and documents data regarding possible alternatives to the use of cadmium plating on general connectors and connector accessories typically used in aerospace and military defense electrical interconnect systems.
HISTORICAL
2010-04-27
Standard
AS9115
The requirements of 9100 apply with the following clarification for software. This document supplements the 9100 standard requirements for deliverable software and contains quality management system requirements for organizations that design, develop, and/or produce deliverable software for the aviation, space, and defense industry. This includes, as required, support software that is used in the development and maintenance of deliverable software. The deliverable software may be stand-alone, embedded, or loadable into a target computer. Where the use of Hardware Description Language (HDL) or high order language is utilized as the design source of electronic hardware [e.g., Application Specific Integrated Circuit (ASIC), Programmable Logic Device (PLD)], the organization and customer shall agree on the extent of applicability of this supplement. NOTE 1: For airborne electronic hardware guidance, see RTCA/DO-254 or EUROCAE ED-80; and for product realization requirements, see 9100.
2010-03-16
Standard
AS9101DW
This is the Microsoft Word® version of AS9101D, which defines the content and the presentation of the Assessment Report for the AS9100 standard. AS9101DW is an historical document; it has been superseded by AS9101E (note: there is not a Word version of this standard).
HISTORICAL
2010-03-09
Standard
AS9101D
This standard defines requirements for the preparation and execution of the audit process. Additionally, it defines the content and composition for the audit reporting of conformity and process effectiveness to the 9100-series standards, the organization’s quality management system documentation, and customer/regulatory requirements.
HISTORICAL
2009-06-29
Standard
AS9120A
This standard includes ISO 9001:20081 quality management system requirements and specifies additional aviation, space and defense industry requirements, definitions and notes as shown in bold, italic text. It is emphasized that the requirements specified in this standard are complementary (not alternative) to contractual and applicable statutory and regulatory requirements. Should there be a conflict between the requirements of this standard and applicable statutory or regulatory requirements, the latter shall take precedence.
CURRENT
2009-06-11
Standard
AS7108/1B
This Aerospace Standard (AS) is to be used to supplement AS7108. In addition to the requirements contained in AS7108, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for painting and dry film coatings.
CURRENT
2008-08-13
Standard
AS7100/1B
This standard includes the forms to be used by a third party to survey a nondestructive test facility with respect to penetrant, magnetic particle, ultrasonic, and/or radiographic methods.
CURRENT
2008-08-07
Standard
AS7114A
This Aerospace Standard (AS) establishes the requirements for suppliers of nondestructive testing (NDT) to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP) in accordance with the current revision of SAE AS7003. Using the audit checklist and the applicable supplementary checklists will ensure that accredited NDT suppliers meet the requirements of this standard and all applicable supplementary standards.
CURRENT
2008-07-30
Standard
AS7116/2A
This Aerospace Standard (AS) is to be used to supplement AS7116. In addition to the requirements contained in AS7116, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for electrochemical grinding (ECG).
CURRENT
2008-07-30
Standard
AS7116/1A
This Aerospace Standard (AS) is to be used to supplement AS7116. In addition to the requirements contained in AS7116, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for electrochemical machining (ECM).
CURRENT
2008-07-30
Standard
AS7117A
This Aerospace Standard (AS) establishes the requirements for suppliers of Shot Peening Services to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstration of compliance with the requirements herein. The requirements may be supplemented by additional requirements specified by the NADCAP Nonconventional Machining and Surface Enhancement (NMSE) Task Group. Using the corresponding Audit Criteria (PRI AC7117) will ensure that accredited Shot Peening suppliers meet all of the requirements in this standard and all applicable supplementary standards. The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements.
CURRENT
2008-07-30
Standard
AS7116/4A
This Aerospace Standard (AS) is to be used to supplement AS7116. In addition to the requirements contained in AS7116, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for laser beam machining (LBM). The LBM requirements contained herein address the drilling, cutting and marking LBM process methods.
CURRENT
2008-07-30
Standard
AS7116A
This Aerospace Standard (AS) establishes the requirements for suppliers of Nonconventional Machining Services to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstration of compliance with the requirements herein. The requirements may be supplemented by additional requirements specified by the NADCAP Nonconventional Machining and Surface Enhancement (NMSE) Task Group. Using the corresponding Audit Criteria (PRI AC7116) will ensure that accredited Nonconventional Machining suppliers meet all of the requirements in this standard and all applicable supplementary standards. The purpose of this audit program is to assess a supplier's ability to consistently provide a product or service that conforms to the technical specifications and customer requirements.
CURRENT
2008-07-30
Standard
AS7116/3A
This Aerospace Standard (AS) is to be used to supplement AS7116. In addition to the requirements contained in AS7116, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for electrical discharge meachining (EDM). The EDM requirements contained herein address the wire, sinker and fast hole EDM process methods.
CURRENT
2008-07-30
Standard
AS7102B
This Aerospace Standard (AS) establishes the requirements for Heat Treating Accreditation by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). These requirements may be supplemented by additional requirements specified by the NADCAP Heat Treating Task Group. Using the audit checklist (AC7102) will ensure that accredited heat treat suppliers meet all of the requirements in this standard and all applicable supplementary standards. All instructions, procedures, tests and inspection records, etc., referenced herein shall be in writing; distribution of instructions and procedures (including all revisions) shall be recorded and controlled. The NADCAP Heat Treating Task Group recognizes SAE AS7004, SAE AS7106, and SAE AS7107 as equivalent to the systems questions of this document as noted in the NADCAP Auditor Handbook.
CURRENT
2008-07-30
Standard
AS7102/1A
This Aerospace Standard (AS) is to be used to supplement AS7102. In addition to the requirements contained in AS7102, the requirements contained herein shall apply to heat treaters seeking NADCAP accreditation for brazing.
Viewing 1 to 30 of 38

Filter

  • Standard
    38